AutoCad 3D :: Best Program To Draw Kitchen Layouts
Jul 12, 2011I can draw the floor plans in AutoCAD but then what kind of program would I use to make them look something like below?
View 5 RepliesI can draw the floor plans in AutoCAD but then what kind of program would I use to make them look something like below?
View 5 RepliesSome code / lsp that will cycle thru layouts and insert a rectangle into model space of where the viewports are actually looking.
I am trying to separate out a number of layouts to different drawings and want to speed up the process.
how could i draw any viewport's border line in layouts, if i do not want to use predefined rectangle,
View 9 Replies View RelatedI am attempting to draw a cable tray layout in Autocad 2010. I am very much new to Autocad.
Basically, i want to draw a cable tray on pedestals which are arranged in a rectangular area. Now, I can draw bends so that the tray stay on pedestals but my question is how to draw the tray that is equidistant from both the corners of the pedestal? There are 6 pedestals arranged in a rectangular manner. All the pedestals are of equal length and width.
I am redesigning my kitchen and I would like to draw the units I have and save them individually in autocad 2011.
I then want to load each kitchen unit and move it into different places to get the best fit.
I knew somebody years ago that did this for a living designing rooms with display cabinets and furniture and he drew the furniture and saved them for later uses and then just loaded them into the room he was designing, but I can't remember what he saved them as?? I know he saved things with the names such as Chair, desk, table ETC but I have been looking in my Autocad Bible, but not knowing the name has stumped me for what I need to look for all I can think of is TEMPLATE but this is not what I am after? or is it ?
I have drawn my kitchen and I want to draw my units as 600mm cupboard, 500mm draw unit, 1000mm double cupboard and so on, then just bring them into my drawing, move them, rotate them, delete them if its not looking right ETC.
My program crashes when attempting to edit a pipe network. specifically when trying to draw a pipe the program crashes the instant I select the second point to place the pipe.
View 3 Replies View Relatedi am writing something that will draw consecutive lines with a rubberband to be used as a leader from a block's insertion point. this:
(WHILE
(SETQ LN (GETPOINT "
Select Next Point (ENTER to Finish) : "))
(COMMAND "LINE" (GETVAR "LASTPOINT") LN "")
)
works, but does not include the rubber band. i tried:
(WHILE
(SETQ LP (GETVAR "LASTPOINT"))
(SETQ LN (GETPOINT LP "
Select Next Point (ENTER to Finish) : "))
(COMMAND "LINE" LP LN "")
)
which includes the rubberband, but will not exit the loop. The last break source in VLIDE shows that
(GETPOINT LP "
Select Next Point (ENTER to Finish) : ") is casuing an error. Placing
(SETQ LP (GETVAR "LASTPOINT"))
outside the loop causes all lines to be drawn from the same point rather than the endpoint of the previous line.
Is there a way to turn off all section tags for drawings refering to all Sketch Layouts in all the Construction Document Layouts?
View 4 Replies View RelatedI cannot share photos from my Elements 8.0 Organizer via email. The program does not recognize that I have an email program loaded. The computer is a new HP desktop with Windows 7 Home Premium Service Pack 1 operating system. My Elements 8 does everything I need except for the photo sharing so I don't really want to purchase a new version.
View 1 Replies View RelatedWhen I'm gonna write my program stops and appears a box that says Run time error and close my program. What is that, what I coul do?
View 1 Replies View RelatedIs there a way to export ALL layouts at once or are you limited to one at a time?
View 1 Replies View RelatedI'm about ready to put together a large job that is going to have a lot of sheets. Since most of my jobs are one sheet plans, this is out of my comfort zone. I usually just have a scaled cover sheet/border that I drop into model space and put whatever I need into it there and then print it. This job has several mini jobs in one huge model space. I think It's going to be better for me to actually use paper space as its intended this time. I'm using 2010. Just a skeleton of an order of operations, so at least I have something to search for detailed instructions.
View 9 Replies View RelatedI had created 14 layouts, in 9 of them i can copy my stamp, in others 3 - I cant ( I am doing copybase and simple copy/paste - isn't working)... what could be wrong with those few layouts. ?
View 9 Replies View Relatedi cannot understand the ANNOAUTOSCALE..When to on / off the button and how to use in layouts
View 1 Replies View RelatedWhen I cut and paste a viewport from one layout to the other the layers that were frozen in that viewport become thawed. Is there any way of copying the viewport over so that those layers that are frozen in that viewport only remain that way ?
View 8 Replies View RelatedAny way to select an Invalid Xref that is attached on multiple layouts and delete them at once instead of going through every single layout and deleting it manually.
AutoCad LT 2014
I want to make a code to zoom extents all layouts in a open drawing.I wrote this but it doesn't work at all:
Sub zoomextentslayouts()
Dim Laytab As AcadLayout
For Each Laytab In ThisDrawing.Layouts
ZoomExtents
Next Laytab
End Sub
I Can't think of what might be making this happen, but when I export a single layout to PDF (or to a printer) everything works out as normal. When I Export all Layouts to PDF, my text changes fonts and inserts squares for only some of the characters.
View 6 Replies View RelatedWhen I add an object field in paperspace to report on the scale of a viewport in the layout, as I return to that layout and zoom in or out the viewport displays as hot in MS (tab reports as PS) and leaves the MS information of my previous visit embeded on the layouts neutral background and the "new" zoomed MS information is added to modelspace. The background objects cannot be selected or deleted but if I go to the block editor screen -choosing any block for my selection, when I close the block edit and return to the layout, the objects are cleared. I have installed service pack #1 for v12 and I lso have installed V13. I didn't notice this problem prior to the service pack or usin v13. I have an Intel i7 processor, 64 bit.
View 4 Replies View RelatedI was asked to convert a .DWG to a .PDF.
The .DWG came from a manufacturer and displayed 3 pages worth of content that was seperated into 3 Engineering Drawings.
The layout included all 3 pages. I want to Plot this document to a 3 Page PDF.
Do I need to create 3 seperate layouts? How do I specify what part of the model goes into a particular layout?
I have found this point today!
If I want to trunoff/on some layers in different layouts, the best way is to use "vp freeze" column in layers properties manager. This way I can manipulate layers' visibility without altering them in MS or other layouts.
Left to "vp freeze" column there is "new vp freeze". I don't know what is this one?
how to set up a layout to show a t-block for plotting purposes, as well as setting up your view ports on a drawing? I have used the layout wizard before, but when it comes to selecting a tblock with the wizard, nothing shows up.
View 8 Replies View RelatedHow do I print multiple layouts at once in the same file, like a batch print so i don't have to individually print each layout?
View 6 Replies View RelatedWhy the layouts are not exported?why the layout are not exported when applying the command “Export”? why only one layout is exported?
Is there a way to export all the layouts as any part of the dwg file is exported?
I have 95 layouts in one drawing and need to export / write out each layout to become individual drawings? Is there a command for this or perhaps a lisp or script.
View 8 Replies View RelatedI'm doing a work where i need to copy many layouts. I can set a few at a time, but doing one at a time is faster (in the end). However, rightclicking the mousebutton on the layout, copy it and scroll to the bottom to 'place at end' it time consuming.
I rather have a lisp of some kind that can copy the current layout and place it at the end (most right) of the layout tabs.
if it is possible with some -command (commandbar) i can do it myself, but i can't find any command to do so...
I've encountered a pretty nasty problem over the past week. I can no longer add specific layouts to existing sheet sets. I can make a new sheet set, but I cannot see the drawings that I would like to add to the sheet set.
The only "solution" I've found is to make a new sheet set, save each of the desired dwgs as newly renamed dwgs, and then, f if I pat myself on the head and spin around in 3 complete circles, I have a 78% chance of being able to add them to the new sheet set.
Obviously, this is like cutting off your hand and holding it, while your friend shakes your deadhand, instead of just shaking his hand.
I've read about this so-called dbl file, but much like Bigfoot, I have not seen one with my own eyes. We have never had this problem in our office- got a new server- had this problem (isolated to the new drive) - got it "fixed" - problem has spread to older drives.
Civil 3D 2010, Windows 7
when I use the selection with the mouse, I can clearly see in model space the borders of the window I create. But when I switch to Layouts, it's invisible. I can still use it, but it's annoying not seeing the window selection. I've tried with OPTIONS-SELECTION and DISPLAY tabs to adjust it and it didn't work.
View 2 Replies View RelatedI have the drawings, which has 64 layouts each. I want to move the multiple layouts to one dwg (means one drawing should have 128 multiple layouts with in) At this that two drawings having layout only, i deleted all object in model space, model space would be the same for that two drawings, after i made the combined dwg. I tired to move the layout by using drag and drop on design center, It was not done. the autocad shows the message was fatal error: out of memory.
View 6 Replies View Relatedmaybe I was dreaming. Maybe I've gone round the bend. I seem to remember somewhere a check box that would show hidden lines in paperspace viewports. For instance, a through hole, or a cavity in something.
Been a while since I've done much besides architectural drawing, so maybe I'm hallucinating.
I also distinctly remember the monochrome plot style always printing in black and white, even in a PDF. Today, the objects in modelspace are in color, and anything in paper space is black and white.
What is up with that? I must be missing something obvious, because I've screwed around with this for an hour and can't figure out what I've done to cause this.
I have an object in model space. but in layout i can see a portion of the object profile as duplicate away from actual object. As i close and reopen the file it disappears. What could be the cause?
View 2 Replies View Related