AutoCad 2D :: Custom Linetype All Elements Are Same Colour
Jun 21, 2011
I've been asked to produce a user defined linetype with a continuous line as its base and with a letter "X" at specific intervals. That's ok, but the kick is that the line should be one colour and the "X" in a different colour.
I suggested creating a block for the "X" and using measure to place the blocks on the line, but that is unacceptable. There will be a lot of lines and these will be at some point deleted/replaced and the "X" blocks would still be there. It would be possible to place all the "X"s for one line in a group so they could be deleted as a group, but in a relatively small drawing there will be several hundred of these lines and in a large drawing perhaps a couple of thousand.
As far as I'm aware in a custom linetype all the elements are the same colour.
View 8 Replies
ADVERTISEMENT
Apr 1, 2009
I'm currently trialling ACA 2010 in our office. In previous releases we used AEC Polygons as hatch and boundary objects for say concrete footing as an example.
Without the properties toolbar, how would I go about changing the linetype or colour of the aec polygon, I don't want to change the layer or a style based override I just want to assign a new colour to an object as the style base is set to 'byblock'. The properties for changing linetype, scale and colour aren't in the properties palette either.
Is this a bug or is there a correct workflow I must assume from now on?
View 2 Replies
View Related
Jul 13, 2012
I have created a custom linetype for the flexible duct when my colleague open the drawings the .shx are missing. So i need to send them the .shx.
View 3 Replies
View Related
Sep 12, 2013
Is it possible to code a custom linetype, so that it only follow certain annotation scales (e.g. 1:100, 1:200 1:500) and so that it just appears as a continuous line below and above these certain scales?
The solution should work even when the drawing is used by others and apply to both modelpsace and paperspace (viewport).
View 0 Replies
View Related
Aug 9, 2012
I have created a custom linetype using shape for Plugmold like this _____ / / _____ Its works in my PC. But when others open it from their PC it shows like this ____ . . . . . ___.
View 9 Replies
View Related
Jan 14, 2013
Is there a way to start a custom line type so that is starts and ends with "O". Right now, the default "FENCELINE1" has circles in it, but it starts and ends with a line.
Here's their code for the line:
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1],-.1,1
I already tried just putting the O's at the ends, and that didn't do it.
Below is a picture of what I'm looking to get. The top one is the FENCELINE1, the bottom one is just circles and lines, but that's how I want the linetype to look when they place it... so first click would have a circle, second click would have a circle, and the circles "in" the line would spread out evenly.
Just so you know... this is for guardrail inside a where house where it has the circle pillars on each end with circular pillars in the middle (every 8', but the spacing isn't crucial).
View 9 Replies
View Related
Jul 1, 2013
I am trying to create a linetype with a 3d shape included to represent road markings, i.e. central lines and edges etc.
For this I need a .shx file and I don't know how to create this as I am not allowed to select 3d objects when using the MKSHAPE command.
How can I best create a linetype with 3d objects?
View 9 Replies
View Related
Dec 8, 2011
I need a custom linetype that includes a shape - a rectangle or a star.
How do I define this "shape" in my custom linetype?
View 2 Replies
View Related
Jan 8, 2013
I made a custom linetype to represent a pipeline. The line is abbreviated by 5 letters. My problem is when I reach and curve in the pipe (an elbow), the text string does not follow the curve. It remains straight for the remainder of the text. Is there a way (autocad 2013) to have the text follow the path of a curve?
edit: I saw one similar topic from 2008 in this thread: [URL] and the best response there is the one posted by eldon where you break the code down to each letter. Still, the picture in eldon's post makes the text a bit jagged. Have any changes been made to AutoCAD since this post that make this easier?
View 0 Replies
View Related
Feb 18, 2011
I made a custom line type called EX (for existing pipes) which looks a little bit like this: - - - EX - - - EX - - - EX - - -
Line works great when I draw from left to right. However, when I draw a line from RIGHT to LEFT, the text displays upside down a little bit like this: - - - X3 - - - X3 - - - X3 - - - ("3" representing the mirror image of "E")
Same applies when drawing from bottom to top, or top to bottom. I totally understand the behavior here, and TBH I think it's OK it behaves that way.
Let's say I'm drawing existing water pipes going in all directions with a polyline. Is there a way to make the text display upward no matter what direction the pline is going?
View 9 Replies
View Related
May 28, 2013
I want to create a custom linetype for a drawing but am unsure of the best method to use. I only need this linetype for 1 drawing and so I would like it embedded in that drawing if possible. Other people may need access to this file so sending a custom file is out of the question.
Should I create a new .lin file or edit the default acad.lin?
I started to create one using Express Tools and when it prompted me to create / save a new .lin file it defaulted to the 'C:Program FilesAutodeskAutoCAD 2012 - English' folder. I was unsure if to save it here or 'C:Program FilesAutodeskAutoCAD 2012 - EnglishUserDataCacheSupport', where ACAD's .lin is stored.
View 3 Replies
View Related
Mar 26, 2012
I'd like to make a custom linetype that is a the standard DASHDOT linetype, but with a small circle drawn on the ends of the line or arc (and only at the ends).
View 4 Replies
View Related
Jul 24, 2013
I am trying to create a custom linetype with solid circles at a specified distance along the custom linetype (see attachment). I have tried using a shape, the special Wingding character but cannot get the result I want. I've tried the hatching method, again with no luck. I've went through the discussion groups, online content, etc. but cannot get it to generate the line the way I want. I see a few people that have been successful but I cannot get it to work.
View 9 Replies
View Related
Apr 18, 2013
I've created my first line type (woohoo!) but the rotated V that I used as an "arrow" won't center and I'm having a difficult time understanding why so that I can fix it. I am aware that linetypes like the one I created exist but I wanted the arrows a specific size and distance apart which I couldn't do with the existing linetypes available to me (also I really wanted to try creating a custom one).
In the attached picture:
-the green line is the finished custom linetype
-the red lines are polylines
-the blue text is rotated 90 degrees, set to a text style titled Linetype (simplex font, not annotative, height set to 0 and width set to 1.0), and Justify set to Bottom Center
linetypes-Model.pdf
The finished linetype code is:
*STREAM_LINE_W_ARROW_BIG,Stream_Line_W_Arrow_Big
A,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371,-.144393,.011213,-.138787,.011213,-.138787,.011213,-.144393,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371
Also, this the first time I've attached a picture, I'm not sure that I did it correctly.
View 2 Replies
View Related
Apr 18, 2012
why these (apparenlty) different two linetype codes give me exactly the same line when I draw them.
*ELEC_NEWLITE_U,ELEC_NEWLIGHT_U ----(N)L----(N)L----(N)L----(N)L----
A,.5,-.2,.5,-.2,["(N)L",STANDARD,S=.1,R=0.0,X=-0.1,Y=-.05],-.25
*ELEC_NEWLITE_X,ELEC_NEWLIGHT_X-(N)L-(N)L-(N)L-(N)L-
A,30,-.2,["(N)L",STANDARD,S=.1,R=0.0,X=-0.1,Y=-.05]
With the first one I intend to see few small dashes "(N)L" few small dashes an so on. With the second one I want to see one long dash "(N)L" long dash "(N)L" and so on.
They both appear as few small dashes (N)L few small dashes and so on
How do I control how many dashes will be in the line? What is the coding definition for the text portion of the line between []?
View 1 Replies
View Related
Sep 15, 2011
I have a custom linetype that's just a series of arrows I want to use to show the flow of a ditch. I've played around with this thing for a while and have these dots at each end of the line that shows up when I print.
Is there any way to make this linetype without the dots at each end? the actual files for the line type.
FLOW.lin
*FLOW,A,0,-.002,.148519,[FLOW,FLOW.shx,s=1],-.449481
View 8 Replies
View Related
Sep 17, 2013
I have a client who requested some complex custom linetypes. (line - shape - line)
I built the shapes and stored them in my ltype.shp file, and compiled that to ltype.shx. Then I added the custom linetypes in my acad.lin file. So everything works on my machine with no problem. However, when I send the drawing to someone else, the linetype works, but the shapes are left out. My guess is that since her ltype.shx file does not contain my new shapes, the lines are just drawn without them.
Is there a way that I can have those linetypes, complete with shapes, ride along inside/embedded the dwg file?
And before you ask, no, it's not an option to provide the client with the shx file that contains these shapes. I'm one of many different people in many different companies that might work on these drawings in the future and there's just no way that they'll be able to send an shx file along with the drawing every time someone new needs to work on it.
View 2 Replies
View Related
Aug 31, 2011
I am trying to create a custom detail line, if possible?
Is there any way to create a custom detail line which will be a dashed line (similar to Hidden) as well as containing arrows every "X" feet or inches. i am attaching an image that is what i would like to create so i don't draw from scratch.
I would like for it to function as a line, spline, shape, whatever the needs may be.
View 9 Replies
View Related
Jun 18, 2013
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies
View Related
Dec 30, 2012
I installed 2013 and went straight to the customize settings to tone down the grid intensity. It's always the first thing I do. The colour changes but if I restart max the setting reverts to the installed default. Strange thing is, I also change the viewport active border colour, but that setting is being remembered fine.
I can't remember ever having problems installing max, but first the 2013 installer caused all sorts of problems with .NET, and now this.
View 4 Replies
View Related
Aug 28, 2012
What I am trying to do is to have a flat vector brush in black that I can change to whatever colour I want later just be selecting the colour from the colour bar while I am working.
So. When I edit the brush I go to the fill Properties tab and select 'Local colours replace - all brush colours' and save. The trouble is that it does not seem to save this setting. When I edit the brush again it reverts to 'local colours replace - named colours' I get the same problem if I 'save as new'.
View 5 Replies
View Related
Dec 31, 2011
more basic notes unearthed when upgrading windows
View 2 Replies
View Related
Nov 14, 2012
How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies
View Related
Feb 26, 2014
A B&W logo ought to be possible to change the colour of the black elements? I can find the appropriate menu option, "Change Colour" but it randomely wioll not highlight. When it does, the process does not seem obvious. I do the obvious things, but nothing is happening.
View 11 Replies
View Related
Oct 30, 2012
How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies
View Related
Nov 4, 2013
is it possible to change the colour of all elements in a pattern without changing the ipt file?
I have an assembly that has 4 rectangular patterns that can have any number of elements, sometimes the customer will ask for coating to be applied, in this case i only want to change the colour at the assembly level only.
View 1 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
Mar 10, 2013
When I load pics into CS4 or Elements6, there is a heavy magenta overcast, particularly on flesh tones; this doesn't occur if load the same pics into Xara Designer Pro X. This phenomenon does not occur either if I upload a picture to this forum!!! I have tried twiddling with Hue, Saturation and Lightness but I cannot get the actual colours across the whole picture. On printing the picture the overcast is still present.
View 9 Replies
View Related
Oct 13, 2012
I'm having trouble changing colour. Every time i select the paint bucket tool and change colour it won't allow me and stays grey.
View 1 Replies
View Related
Aug 25, 2012
how to set up the colour management settings to achieve the best printing results with elements 10
View 7 Replies
View Related
Mar 22, 2012
I am using PSE10 and am finding that the colour showing on my edited photos is different to what displays on the Print Preview screen. This displays and prints much darker. I am using a Canon Pixma IP4950 printer recently purchased. I have tried various adjustments to settings but with no success. I find that I have to lighten each photo x 2 to get a decent colour print.
View 14 Replies
View Related
