AutoCad 2D :: Moving PDF Clip To Another Drawing

Jan 24, 2013

I need to move a PDF within it's own box to another drawing. It's acknowledged as a DWG.

The DWG. is something I can't upload.

Describing the box is kind of hard. It has its own perimeter and reacts fine within it's own DWG and behaves normally, and there's no message when trying to move it or Copy it.

But, when Copying into a new drawing, then it doesn't come through. There's no error message or any sign of it on the the new DWG. The background comes in fine, so there's no issue there. All X-REF's are working.

View 0 Replies


ADVERTISEMENT

AutoDesk Smoke :: Moving Clip From One Track To Other

Feb 7, 2013

Is there any short cut for moving the clip from one track to other(above or below track)?

like we have in FCP.

View 4 Replies View Related

Premiere Pro :: Moving Clips With Snap To - Why Clip Edges Ignored

Dec 14, 2013

The playhead is 2 frames away from the end of a clip. With "snap to" enabled, the clip can be moved to Snap to the edge of the playhead. OR other nearby clip edges. OR go way past the playhead and drop overtop of the clip I am trying to make it Snap to. It's like PPro has a blind spot near the playhead. Feels like trying to teach someone to drive, but they can only use the pedals by mashing them to the ground or not at all.
 
I do not understand why it wouldn't just keep snapping from playhead to the next available clip edge.Vegas Pro does this intelligently. It even watches the markers for snap-to edges.But with Prem Pro, I have to move the clip back or to the wrong place +undo, then move the playhead, then do the move all over again.
 
REALLY annoying on an active timeline with 3 or 4 tracks that is only a couple of minutes long. INCREDIBLY annoying on a busy timeline of 8-20 tracks in a project 20-30 minutes long or longer.
 
It really bugs me that the program does actually do a better job overall, but the usability is so rough in PPro. Weird that programs like Vegas, which have a feel (and reliability) like cheap plastic toys compared to PPro also happen to have so much more intuitive UI.
 
I got started back with Vegas Pro 8 and PPro CS6 feels outdated by comparison just with the general navigation, ease of use and not having to fiddle with settings to make them useful.

View 7 Replies View Related

AutoCAD .NET :: Moving Text Within Drawing

Sep 16, 2011

I am, as of now, trying to learn the VB.NET programming for AutoCAD applications from scratch .

The question I wanted to ask the devs out there is that, is there any way or a function to move a text object within a layer to a different geometric location? I was thinking it could be accomplished by translating the text or offsetting it.

View 3 Replies View Related

AutoCAD 2010 :: Moving One Drawing Into Another Without Having To Redraw?

Mar 22, 2012

I'm fairly new to AutoCad and i'm using it on a mac. How I go about getting one drawing into another document without having to redraw it?

I have a plan and elevations in seperate documents and how to get the elevations into the same document as the plan without having to redraw every elevation.

View 4 Replies View Related

AutoCAD Inventor :: Moving Items Within Part Drawing

Jun 21, 2012

I am trying to move a component within a part drawing, not an assembly. When I do "move bodies" it wants to move every extrusion within my drawing. If I click move face, then I have to click every face that I want to move (which is time consuming) and then it often times doesn't work? Sometime it works other times it just moves the origin indicator and doesn't move the faces I have selected.

View 2 Replies View Related

AutoCAD Inventor :: Moving End Of Part Marker In Drawing

Apr 10, 2012

I am using Inventor 2010 and would like each view of a drawing to show a different machining step.  I.e.. A rough cut dimension and then the finish cut dimension.  Is it possible to create the part as it would be machined and then use the EOP marker to set each view.  Would like to model one part and get all views.

View 9 Replies View Related

AutoCad :: Drawing Sheet - Moving All Existing Attributes Over To Right

Feb 22, 2013

If you look at the attached drawing you will see my drawing sheets. The problem I have is regarding the attributes used for the 'Checked By' section of my sheet.

Yesterday I added a 'Size' tag to my sheet so this shows whats size paper the sheet is to be printed at. To make this fit I needed to move all the existing attributes over to the right.

Everyone except the 'Checked by' tag moved. I cannot now get this tag to move over even if I open the block up and move it.

I've attached an image to show you what I mean.

View 3 Replies View Related

VideoStudio :: Drawing Object Over A Video Clip

Nov 25, 2012

Is it possible to draw an arrow or a circle or whatever, on a video clip? Example: I draw a circle around the head of a moving person for the next 15 seconds. I use VPpro X5 ultimate.

View 11 Replies View Related

AutoCad :: Drawing Circles Or Moving Object Has No Image Guide?

Dec 9, 2012

I'm currently using auto cad 2000 because it's required in our class. When I make circles or move or objects there are no image guide. like when I make circles only the lines are there I still have to calculate what the diameter is rather than by simply looking how big the circle is. or when I'm connecting objects, It's very hard to connect complex objects by moving them because there is no guide to where the image is suppose to be when the mouse is at a particular place.

View 9 Replies View Related

AutoCad :: Trace Of Object Or Line Doesn't Appear When Drawing Or Moving It

Feb 6, 2013

Why doesn't appear the trace of an object or line when i'm drawing it or moving it?

In Autocad 2005.

View 6 Replies View Related

AutoCAD 2010 :: Moving Existing Drawing Objects To Snap Grid?

Dec 22, 2012

I have a slightly unusual query that I can't seem to find a solution for elsewhere. I have an existing OS plan that is 'off grid', and would like to adjust the vertices at the ends of all the existing lines and polylines so that they all sit on a grid point. Is there a quick command or script that does this?

View 2 Replies View Related

AutoCAD Civil 3D :: Screen Flickers When Moving Mouse Around Open Drawing?

Oct 15, 2010

The screen flickers when I move the mouse around an open drawing.  I just applied the latest patch to Civil 3D 2010.  It was not doing this before the patch.

Have Quadro 3500 video card. Updated the driver for that with no change.

Have a Logitech wireless mouse, M310.  Up dated the driver for that with effect.

Changed to a wired mouse, no change.

Is there a setting in Autocad where I can set the refresh rate so that it does not refresh while moving the mouse. Or at least slow the automatic refresh rate down?

View 6 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Script For Moving Drawing In Multiple Drawings?

Apr 23, 2013

QT : 1 . I  am looking for a script to move the drawing such that the left bottom corner is placed at 0,0  without any manual intervension. This is to done for all the files in a particular folder.

QT : 2   In the same script file I want one block to be inserted also in each drawing. the block is placed in the network drive . so how to copy the path after putting the insert command.  I tried -insert;  but it is not working how can i give the path in script file.

View 9 Replies View Related

GIMP :: Moving Selected Area Versus Moving Selection / Moving Whole Image

Mar 22, 2012

I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.

If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.

The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.

How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."

View 1 Replies View Related

Paint.NET :: Drawing And Moving Eclipses?

Apr 26, 2012

I am trying to trace a logo wich has a series of circles, I have copied the logo as a new layer and created the layer I am working with enough transparency to be able to copy.

after I draw the eclipse how do I select and position it witout moving the whole layer, also after I have drawn it can I select it and change the thicknes.

View 1 Replies View Related

Photoshop :: Sketch Is Moving While Drawing On Tablet

Jul 4, 2013

I have a windows 8 tablet with Photoshop installed but when I make a sketch (especially when zoomed in) the image (sketch) is moving with the movements of my stylus. This makes it difficult to draw. Is there a way to fic or lock the screen so I can draw more precisely ?

View 5 Replies View Related

GIMP :: Moving Selections From A Drawing To Another Page

Nov 8, 2013

I have an existing drawing (A3 size) which loads with a mottled grey background for some reason (looks fine when printed).

I want to select a couple of small rectangles and put them on another page. Perhaps another possibility could be if I could save my selections as separate files (if this were possible) then I could use the "Open as Layers" method which is well described in this forum.

View 1 Replies View Related

Photoshop :: Moving Anchor Point Using Space-bar While Drawing With Pen?

Sep 18, 2012

If you're an Illustrator user, you may be familiar with the ability to move the active anchor point of the line, by holding "Spacebar" and dragging during the drawing process. This is a useful timesaver for creating complex paths. While Photoshop CS6 has introduced some useful new path-editing features, this is one that is still missing.

I cant' figure out why Adobe does not make the pen tool identical between the two programs. This is an old feature in Illustrator. Don't the Adobe programmers talk to each other.

View 2 Replies View Related

Illustrator :: Moving Anchor Point Using Spacebar While Drawing With Pen

Aug 28, 2012

While using the pen tool, moving the current anchor point by hold down the spacebar, is a great time-saver and I use it frequently. But I find it a little frustrating that, when closing a path, the "spacebar" feature does not work. Instead, the apposing direction point goes whacko. Is there an alternate keyboard shortcut to overcome it? Even though I "know" it won't work, I seem unable to resist holding the spacebar to fine-tune the last anchor point.

View 4 Replies View Related

Illustrator :: Cannot Snap To 10px Grid When Moving Objects Only When Drawing

Aug 17, 2013

I have my grid set to 10px (with subdivisions set to 1). Snap to Grid is enabled. I had "Align New Objects To Pixel Grid" checked when I created the document.
 
When I draw an object, it will snap to the 10px grid as I am drawing it. However, when I go to move the object around, it will not snap to the grid at all. In Photoshop and Fireworks, this was a piece of cake, but in Illustrator I've never been able to get this to work, nor find a solution for it. The only way I can kind of get it to work is to set my grid to 1px, but I really don't want to be zooming in that far constantly when moving things around.
 
For what it's worth, this is happening in Illustrator CC, but I've had this same issue with older versions as well.

View 3 Replies View Related

AutoCAD 2010 :: Force Attribute Position To Remain Fixed In Drawing When Moving Block Position

Jul 12, 2013

Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?

I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........

What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other.  I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.

Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process.  It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.

View 4 Replies View Related

VideoStudio :: Selecting Clip Goes To Front Of Clip?

Oct 11, 2011

When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.

View 5 Replies View Related

Premiere Pro :: Turn 15 Fps Clip Into 30 Fps Clip Through Adobe?

Mar 27, 2014

Not sure if this is possible, but is there any way to turn a 15 fps clip into a 30 fps clip?

View 3 Replies View Related

AutoDesk Smoke :: Put CFX Clip On Top Of The First Clip

Nov 22, 2012

1. I put a clip in a timeline , then i put a cfx clip on top of the first clip. Add axis clip to cfx clip, set transparancy to 100% (fully transparent) , when hit render , this cfx is still calculated.

2. if i have stack of cfx clips, the clips are solid (no matte or transparancy ). one clip is on top of the other. In the top layer , i add a axis fx and cut a very small hole. We can see even a very small hole ( that will exposed small part of the bg ) will trigger smoke to render both of the clip full frame. Actually i only will see small part of the BG so i'm expecting smoke to render only that visible pixel. How to control this ? In some case i will waste my time waiting smoke to render part that i don't need.

View 6 Replies View Related

AutoCad :: How To Trim / Clip A Block

Jun 29, 2012

I am using AutoCad 2007. Is it possible and if so how do I trim, clip a block?

View 5 Replies View Related

AutoCAD 2013 :: XREF Clip Selectable

May 24, 2013

So we have a frustrating porblem.

When we have a clipped XREF the boundaries are selectable as well as the insertion point.

We want to be able to lock the xref inplace and make it not selectable?

View 4 Replies View Related

AutoCAD Civil 3D :: Add Vertex To Polygonal PDF Clip

Oct 18, 2013

I have a pdf xref with a polygonal clip applied. I'd like to change the shape of the clipping area and need to add vertexes to do so. 

How can I add a vertex to a polygonal pdf clipping?

Usually I can just select a vertex and pressing crtl will cycle through add vertex, remove vertex, and if it's a line segment, change to an arc. When I select the vertex of a polygonal vp clip I can't do this. 

View 1 Replies View Related

AutoCAD 2010 :: 3D Clip Mini Screen Does Not Appear

Jul 3, 2012

When using the 3DClip command, the mini screen no longer appears for me to complete this task. Also, about 50% of the time, my drawing will lock up or fatal error when trying to utilize the 3DClip command.

View 1 Replies View Related

AutoCAD .NET :: Find Clip Id From NonRectangularViewPort Object ID?

Dec 4, 2012

I have  the ID of non rectangular view port and I need to find the Polyline attached to it.

View 6 Replies View Related

AutoCAD 2013 :: Crop / Clip Baseview

Oct 17, 2012

I'm looking into the new BASEVIEW command but I'm missing a feature. I really need to crop or clip a view made by the BASEVIEW command.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved