AutoCad 2D :: Dimension Fill Color In Background
Aug 27, 2013My problem is about the dimension fill color, every time i set the fill color to none. But every time i reopen the drawing again the fill color is set into background.
View 2 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Set Dimension Text Fill Color To Background
Oct 28, 2013I would like to set dimension text fill color to "background" instead of, you know, dimensioning my drawings properly.
I have this code I got on these forums and it works well except for the 'TextFillColor' variable. I can't find the correct color number or syntax for "Background'. It's currently set to 0 which produces ByBlock, and any number I put in there corresponds to the AutoCAD color number (1 = Red, 2 = Yellow, etc.)
If you have a better routine that you could post that works for me too. Or maybe you could just do my work for me? Even better.
(defun c:test (/ obj num cnt)
(vl-load-com)
(setq ss1 (ssget '((0 . "Dimension")))
num (sslength ss1)
cnt 0)
[Code]...
AutoCAD 2013 :: Dimension Fill Color Text Box Size
Oct 24, 2013I have the fill color turned on in my dimension style to background. I want to adjust the "masking" box size. Just as you are able to in the text edit-background mask. I believe the default must be 1.25 larger than the text. I would like it to be 1.00. Is this possible? You can adjust the text background mask size, but not the dimension mask size.
View 8 Replies View RelatedAutoCAD 2013 :: Dimension Style Fill Color Causing Random Lines On PDF Files
Dec 13, 2013Using Autocad 2014. I recently changed our dimension style fill color to background. Now when we create pdf files, there are random lines either to left of the text or left and top of text. It is not every dimension. We had it set to none before and would trim lines around dimension text. We did not have problems with pdf until changing the fill color. It plots from autocad to plotter without a problem.
View 2 Replies View RelatedGIMP :: Fill Selected Background Area With Flame Fill Pattern
Dec 17, 2012see xcf attachment...
I used a heart fill pattern of the right 75% of the picture and the left 75% of the picture is selected overlapping the first fill in the background... I want to fill the selected background area with a flame fill pattern where it overlaps the selected portion of the heart pattern as well as the transparent area... 'overlay' looks better but Gimp is FAILING to fill the transparent areas, it ONLY fills the overlapped heart pattern portion of the selected content!!! I even tried filling the transparent area with 'white' then filling the selected area, but it STILL ONLY wants to overlay fill the heart pattern, it STILL leaves the rest alone!!! it doesn't matter if the background is white or transparent, it leaves that alone and ONLY fills the heart pattern area of selected portion of the image!!!
Photoshop :: How To Fill Canvas With Color Without Having To Cover It With Large Rectangle To Fill
Sep 12, 2013How do I get it so that when I draw a shape it will fill with color? In my options bar there is a rectangle with color where I can choose that, but sometimes that's not up. How do I pull it up?
How do I fill a canvas with color without having to cover it with a large rectangle to fill? I've gotten answers to this but none has solved the problem.
Corel PHOTO-PAINT X6 :: How To Jump Directly To Uniform Fill - Models Dialog For Fill Color
Apr 23, 2012In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
Illustrator :: Fill Section But Using Fill / Stroke Only Changes Line Color
Feb 17, 2013I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
Photoshop :: Remove Text And White Background And Fill It With Its Respective Background?
Sep 22, 2013Remove the text and the white background and fill it with its respective background ?
View 4 Replies View RelatedAutoCad :: Background Mask In Dimension Text
May 23, 2006If you can background mask dimension text the same way you can with mtext. I know i can explode the dimension and edit the text and give it a background, but that is poor practice. I still want to keep the dimension associated.
View 4 Replies View RelatedAutoCAD Inventor :: Turn Off Dimension Background Mask In DWG?
Oct 18, 2013How do I turn off the background mask on dimensions in my inventor dwgs (i.e., so the text doesn't cover up the dimension line.)
View 2 Replies View RelatedAutoCAD 2013 :: Automatic Alternating Background Fill For Table?
Sep 24, 2013know of a way to automatically alternate a background fill color for every other row on a table (gray, white, gray, white, etc.)? I can set up the fill color manually for each row, but if I delete or add a row, I have to manually redo the alternating fill color.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
CorelDRAW Graphics Suite 12 :: Make Outline Color Of Object Same As Fill Color?
Dec 5, 2011I still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedCorelDRAW X6 :: Outline Color Defaults To Same As Fill Color On Resulting Curves?
Apr 25, 2013Set the Trace Bitmap so that the outline color defaults to the same as the fill color on the resulting curves? Currently, resulting curves have to be edited one color at a time to give them hairline outlines with the same color as the fill. It's mighty tedious for complex vector art.
View 9 Replies View RelatedIllustrator :: How To Change Stroke Color While Retaining Fill Color Using Eye Dropper
Jan 6, 2013I have a question regarding illustrator. Let's say I have a circle with blue fill and red stroke. And I place an image in the illustrator file. Now I want to change the red stroke of my circle to let's say a purple color by sampling the color from the image.
How can I achieve that with a eye dropper tool? Every time when I try to sample a color from the image, the whole circle will change to purple instead of just the stroke? I have tried multiple key combination, shift, alt, ctrl but they all don't work.
Photoshop :: Color Doesn't Work - Fill Sun With Proper Color (red)?
Aug 5, 2013I took a photo of the sunrise. The sun was very "red" from forest fire smoke. But when I looked at the photo later the sun had lost its "red" (due to the brightness of the sun). restore the sun color as I saw it?
Below is the photo I want changed and the next photo (not mine) is approx. the color I saw the sun as (perhaps a little redder). I want "my" sun filled with that color.
AutoCAD Visual LISP / AutoLISP :: Alternating Background Fill In Table
Oct 1, 2013Any LISP routine that I can run that will make alternating rows of color in a table?
I can setup a table with the TABLE command and setup the rows to alternate gray and white, but if I add or delete a row, the alternating background fill pattern gets messed up (see attached example). Manually redoing the pattern isn't bad for a few rows, but for 30 or more it's a real pain.
If I could run a command that would activate a routine that would start with gray at the top and then alternate white and gray for every row for the rest of the table, that would be awesome.
Photoshop :: Picking Color From Color Fill Layer...
Feb 19, 2005i'm making a new color fill layer and want to fill it with the same color like an other (already existing) color fill... how can i simply pick the color from that existing layer? or how can i set the foreground color to the collor of an existing color fill?
View 9 Replies View RelatedIllustrator :: Automatically Set The Stroke Color As Fill Color?
Nov 14, 2012I have a file with two squares with red and blue fill colors respectively and transparent surrounding strokes. I'm trying to find a way to automatically set the stroke color of each square to the respective fill color. Is there an Illustrator script somewhere that would achieve that? I am not aware of an internal Illustrator command for this purpose.
View 8 Replies View RelatedAutoCAD 2013 :: How To Fill Up Color In Polygons
Jun 16, 2012I have a drawing (.dwg) file. It is having so many polygons created by polyline. I want to fill up those polygons by a color. How can I do the same in AutoCAD?
After that How can I generate .svg from .dwg?
AutoCAD 2013 :: Fill Text Box With Color
Nov 6, 2012How do we fill a text box with a certain color. Tried background mash from properties but it wont work.
View 1 Replies View RelatedAutoCAD .NET :: How To Fill Color For Block Reference
Sep 9, 2013 i have a .dwg fille with some block reference.
I want to fill color for block reference, but when I debug to hatch.appendloop function, I get message eInvalidInput, and block don’t fill color.
This is my
[CommandMethod("FillColor")]
public void FillColor()
{
Document doc =
Application.DocumentManager.MdiActiveDocument;
Editor ed =
doc.Editor;
Database db =
HostApplicationServices.WorkingDatabase;
Transaction tr =
db.TransactionManager.StartTransaction();
[Code]....
AutoCad :: Fill Rectangle With Back Color
Jun 28, 2012I have placed a rectangle in my template and want to know if there's anyway to fill this rectangle with a color?
I can use another object if that's better - mainly wanting to be able to fill a pre-determined space with a back color.
AutoCad 2D :: Dimension Arrowhead - Can't Change Color To Bylayer
Aug 22, 2011I have a series of existing dimensions from others which I want to put on a screened layer so they aren't prominent. They are dimension objects, and going into the dimension style manager, I can change the color of the dimension and extension lines and the text to "Bylayer," but I can't find a place to change the color of the arrowhead, which, in this case, is not an arrowhead but is an oblique slash.
I exploded one of these dimensions, and with "List" I found that the slash was a block called "Oblique." When I exploded this, it became a line, which was on Layer 0, and its color was set to a specific color, not on "Bylayer".
Is there a way in which I can change the attribute of this dimension style to override this specifically set color of the oblique line to reset to the color I want it to print in (in this case, "Bylayer").
CorelDRAW X5 :: Fill Font With Background Image
Jun 22, 2011I am trying to take a big block font and fill it with a background pattern image and am having NO luck.
View 3 Replies View RelatedIllustrator :: How To Fill The Background Of Filled Path
Mar 7, 2013I have a banner that I got from a vector eps file.
Now what I would like to do is fill the white background of the outline path...
See my image
Illustrator :: Pattern Tool Background Fill
Jul 30, 2013Is there a way that the background fill of a pattern can fill the whole pattern so that there aren't gaps like the above picture? So that it woudn't matter if you expanded the border there would always be a solid fill background?
View 4 Replies View RelatedIllustrator :: How To Fill A Shape With Image As Background
Mar 8, 2013I am trying to get more familiar with Illustrator in meanwhile. Still have difficulties with some tasks.
I ve got designed a shape in illustrator which has to be need filled with image like a background. Imagine we have a circle and what I need is to fill only circle with costum picture, how to do that?
Illustrator :: How To Fill Background With White Colour
Oct 7, 2013How can i fill the back ground with a white colour - I would like my main image with a white background but i am not too sure how to achieve this?
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Dimension Color By Layer
Oct 20, 2011As a consultant we grey out architectural backgrounds for our sheets. We use the SetByLayer command to change the color of the objects in our sheets to gery out. The issue is with dimsensions. Dimension Line Color, Extension Line Color, and Text Color are all set at By Block as default and no one ever bothers to change it unless they are setting it to a specific color which is even more of a problem for us. You can edit the properties of an existing dimension and set Dim Line Color, Ext Line Color, and Text Color to by layer, I am looking for a way to automate this. Something that can search through a drawing, grab all the dimensions (even in blocks) and set everything by layer.
View 9 Replies View RelatedAutoCAD Inventor :: Client Graphics - Circle Fill Color
Apr 11, 2013I am trying to fill a client graphics circle with colour . i'm just using the sample included in the API Samples.
' Create a transient circle objectDim oCircle As Inventor.CircleSet oCircle = oTransGeom.CreateCircle(oCenter, oNormal, 1)Create a circle graphics object within the node.Dim oCircleGraphics As CurveGraphicsSet oCircleGraphics = oCurvesNode.AddCurveGraphics(oCircle)Call oCircleGraphics. Color.SetColor(255,35,35) '
This line doesn't work
