ObjectARX 2007 with C#
What would be the best way to remove duplicate points from DB?
I do not think iterating through the whole database and compare each point's coordinate would be the best way since it will take a lot of time if the points are many.
I once saw a CAD command that does it for me. (which I can't remember now)
Maybe I could use that command.
I am looking for code to remove duplicate points (xy coords) from a list with a fuzz factor parameter.
View 1 Replies View RelatedI am a surveyor who wants/needs to perform survey adjustments on our data and from what I can tell this will require us to use FBK files generated from our TDS RAW files. Easy enough, but I am running into problems during import because when our field crews shoot a bad point or need to fix a point code they will overwrite the "bad" point with the "fixed" one.
when I go to import the points via FBK apparently the system doesn't realize these points were overwritten and I get duplicate point errors. This in itself isn't that big a deal except that I am only given the option to ignore the duplicate point (no overwrite, renumber or anything) which leaves me with a bunch of bad points, bad codes, etc. Sifting through the fbk to find the problems has proven dificult and time consuming.
Is there any way around this problem? we can bring our RAW files into other software (Carlson Survey, Trimble Business Center specifically) and everything works fine but we would rather not use extra software just to do survey adjustments, which C3D seems apparently capable of.
I have the right click on autocad for repeat the last command.
when i launch my prog. --> the prog show a form with a datagridview. I have added a contextMenuStrip in this datagridview.
SO when i launch the prog with the right click (repeat last command) the form show and the contextmenustrip too. (if the mouse is on the datagrid.)
How i can cancel or purge the event mouse right click ?
Is there any way to remove a double post? Normally when I post, I exit the site right after I submit it to avoid this ever happening.
View 2 Replies View RelatedI have a file based on an imported dxf. It seems to contain all the paths twice (at least), which is making the file huge (~30Mb). Is there a quick method of selecting/removing these duplicates?
Spec. Illustrator CS5, Windows XP Pro.
I have multiple duplicate photos in my Photoshop Element 10 catalog - I have run across the compare a photo tutorials but I have possiblely some 200+ photos that are duplicates. Any simpler way to remove duplicate photos?
View 4 Replies View RelatedHow can I remove multiple duplicate photos from Elements 6 catalogue?
View 2 Replies View RelatedHow do I remove large amounts of Duplicate pics at download time????
View 1 Replies View RelatedI have an "existing" surface built. But there has been some construction since my company surveyed the site. So, my surveyor went out and got the new points in the area of the new construction. I am trying to remodel the "existing" surface without rebuilding the entire surface. I have removed the old (demoed) points from the point group used to define the surface. But, the points are not being removed from the surface.
View 9 Replies View RelatedWe need to remove multiple survey database points from a drawing but not all, due to construction on a site previously surveyed. What is the best method for this?
C3D 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
How can I remove bullet points from a flyer created in photoshop?
View 1 Replies View RelatedI am wondering if there is a way to add/remove/redistribute anchor points on a compound shape so that there are evenly spaced anchors along the outline of that shape.I am aware of the "add anchor points" command. But that adds a new anchor at EVERY midpoint between two anchors. It doesn't smartly calculate where to add and where to avoid adding anchors.
View 1 Replies View RelatedIs there a way to remove redundant points whilst maintaining the exact shape of the path?
After using Pathfinder or Expand there are often many redundant points which can't be removed using Simplify or Unite.
The VectorScribe plugin has a Smart Remove Points feature which is exactly what I want. I'm presuming the only way I can get that feature is to buy the plugin.
A simple example is shown below: The path is part of an exact circle and I need to remove one of the anchors.
I am studying for an MSc in Geology and am doing seismic mapping. To tidy up my maps I exported them to ArcGIS so I could join various ones together and also contour the maps. Then I exported the GIS maps into illustrator so I could attempt to smooth some of the contours as they are extremely jaggedy due to the nature of the data.Is there a way to quickly smooth lines or mass delete points that make up the lines?I am asking because I have 30+ maps and each map has maybe 50lines with each line being made up of currently about 1000 points each...
If I can't find a solution I will probably end up drawing over the contours with the pen tool and just smoothing it that way, as it should be a lot faster then deleting so many points.
I am currently using Illustrator CS5 and have access to CS4.
I had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list.
I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....
I have a large surface (over 1.5 million points and 20 000hectares)
I need to get a point file .csv from the TIN to be able to use it in another program.
-so i've extracted the points from my surface, but they are Autocad points.
-next step is to convert them to civil 3d points.
-I can not select them all when converting them or my computer crashes.
-so i select about 25 000 at a time, the converting takes roughly 10 minutes.
and i have over 1.5 million points to do.
how can i speed this up.
will more ram useful?
there is a way to convert land desktop aecc points to cogo points and use the full description?
I do not have access to the ldt files nor to the Descriprion keys file. It would be nice if there was an option to preserve full descriptions when converting (that would be just too simple).
I have recieved a file with many points and would like to convert them into COGO points in Civil 3D. The problem is; I would like to keep the hole ID's as I convert, I've made a few conversions and lose the hole ID every time (not showing in Name or Description). Is there a seting I am missing to keep these? My aim to to organize the COGO points in different point groups.
View 3 Replies View RelatedI have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points? I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.
View 2 Replies View RelatedI have a project that was started by leaving all the survey data inside the "All Points" group. So, I'm concerned that when I enter my as built survey points, that even if I put them into their own group, that the original surface will still look at them and just rebuild to my asbuilt data, effectively cancel out the purpose of the asbuilt survey. Will this happen?
I want to take the original points and put them into a group of their own, but I don't know if that will affect anything or not? I have several wetlands already designed on that surface with volume calcs already done too.
What should I do?
what absolute points and relative points are in AutoCAD. What is the difference?
View 8 Replies View RelatedI have two locations marked by steel stakes on my land that are also shown on a CAD drawing. The CAD drawing is two dimensional; however, contours are shown. I have physically measured distances between these two known points and numerous other locations that I wish to plot on the CAD drawing. I could always print the CAD drawing to scale and plot the new points on the CAD printout by using the two known locations, a compass to draw arcs and locating the new points by where the arcs intersect. I am sure there is a much more efficient way to plot these new points within the CAD program itself. I have just started to use CAD;
View 1 Replies View RelatedLet me make my question clearer by considering an example as follows, Assume I have points A, B, C and D in a map. Is there any command that can list the distance between any two points out of all points? e.g. distance of A-B, A-C, A-D, B-C, B-D, C-D.
View 1 Replies View RelatedWhen I change a section to static mode, I would like to add new section points or erase section points.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I am trying to locate duplicate polylines within a drawing of about 9000 polylines. I do not want to delete them, nearly locate them to compare on an in house program. I know there are 16 duplicate locations, but the drawing clean-up command only locates 2 of the 16.
View 5 Replies View RelatedI want to find out duplicate line present in document which i have required to do curtain operations (e.g change of linetype, colour)on it. In my code, i am holding AcadSelectionset which contains number of lines which may or may not be duplicate line. I want to these detect duplicate line and also the original line. Currently i am doing this by checking start and end point of all lines present in selection set.
View 7 Replies View RelatedIs it possible to duplicate sheets and views with ilogic.
I coudn't find any module in the ilogic browser that does something similat to duplicating.
Im working on a grading plan and want to consider raising the site to cut down on my export of earthwork. What I would like to is take my PROPOSED SURFACE A and copy it along with the grading features to a NEW SURFACE B. This way, if B doesn't work out, I can go back to A.
Im assuming I need a new surface and a new site?
Is there a way to duplicate in place? I have a instance where I am using a lot of subtractions and I want to have multiple copies of objects in the exact same position. I am finding that when I do copy I often snap to the object but the direction for depth relative to the view I am in ends up being different. Example being I have a 2" Diameter circle extrude that I want to be 120" long. I created that. I want a copy of it in the same position. I am looking from the front so all I see is the circle. I select copy and grab the center point and snap to the centerpoint. Now I have its zero at the other's 120" mark. I am hoping I could just run a duplicate command, but I cannot seem to find that.
View 3 Replies View RelatedIs there any way to have duplicate attributes in a block but with different values so when I use data extraction both sets of values will be sorted in the proper columns?
This is what I'm trying to achieve:
QTY.....ID.....#...........Description
1.........12.....POSCL....POS CABINET – LEFT
1.........12.....POSWL...POS WALL - LEFT
The block is for a unit that is made up of two fixtures (a cabinet and a wall with a counter top). Our customer uses the same ID for both fixtures and treats it as one unit, whereas our order form lists both the cabinet and the wall separately for production purposes. So both of our fixtures will have the same ID, but will have different product numbers and descriptions. In order for the information to show up in the table properly, I need two instances of an ID, # and Description attribute. If I use a different name for the additional attributes, I will get two extra columns.