I am using the following to transform coordinates
Public Function TransformPointWCStoUCS(ByVal WCSPnt As Point3d) As Point3d Dim ed As Editor = Application.DocumentManager.MdiActiveDocument.Editor Dim m As Matrix3d =
[code]......
The WCS to UCS is returning a negative value for Y. Is there another version of these that I need to be using?
I have Lidar LAS files in UTM18 and need them in State Plane. Horizontally they come in fine to a drawing with the correct system set. Vertically they are still in Meters. I know a couple of workarounds. But I'm just wondering if there have been any advances in 2014.
We're still on 2012 but I'm testing 2014 I don't want to go through the whole process again if it's not going to work.
Civil 3D 2012 SP 3 / IDSP 2014 HF1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
how to apply geoid / scale factor for transformations?
I need to get UTM zone 11 in WGS ellipsoid to ground coordinates.
Any way to transform/rubbersheet a photo/raster so it sticks to a wall i.e. vertically and not just doing it 2D. Trying to digitise photo's taken of walls to work in a 3d model.
View 3 Replies View RelatedI have 50+ project sites scattered along a 600+ mile alignment. My alignment reference drawing coordinate system is set to a UTM coordinate system. My project site drawings are set to state plane coordinate systems. Does coordinate transformation automatically occur with data references?
View 1 Replies View RelatedI found a wheel that I like, and almost got it to the right angle of the picture of the car I have, but if only I could angle it just a tiny bit it would fit perfect. But, I can't figure out how to angle it. I have been using CTRL + T when all the handles come up to transform it but I can't find one to angle it.
View 8 Replies View RelatedI have been using CorelDraw X6 for a couple of days now (Trial version) on a Windows 7 v32 machine. I noticed a bug in the transformation tool (Alt F10). Every time that I input a number or value on the transformation box and then press enter on my keyboard it does not change the size of my object. The only way to make it work is inputting the value and then press the apply key (I had have no problems in the pass inputting values and then changing by pressing enter on my keyboard in CorelDraw X5 whatsoever.
View 3 Replies View RelatedI have just switched from X5 to X6. I am almost convinced that before, when I made a change on for instance an objects size in the Transformations docker, I then pressed Enter, and that was the same as using the mouse and clicking Apply. This doesn't work in X6, I have to lift my hand and use the mouse. Is there a way to fix this?
View 3 Replies View RelatedI placed an element in the bigger picture, then I tweaked it, distorted it, used perspective etc. etc. Now I've decided to alter the original of that element and I want to place it in the bigger picture again. And i really want to use all the transformations that I used the first time. Is there a way to capture the transformations and apply them to the replaced element?
it's all image, pixels, no text, paths or even layers in this element I'm placing.
Problem: My artists are telling me that they are experiencing a transformation of their text when they try to do a mirror. We do a process called sublimation that requires us to print our artwork backwards, and when they perform the mirror operation occasionally the text either crunches together from left to right, or stretches out in the same direction.
The mirror also chances the size of shapes, overall it seems to be an issue with the Mirror action. So far the only effective way to fix the problem is to restart the PC. I have asked them to try restarting CorelDraw alone, and will see if they works next time.
Take a sphere, transform it in both location and rotation. Now you want to make it's new transform and rotation zeroed out so so that it still rotates around it's local axis but all its base values are zero. If you just freeze transforms, it puts everything to zero around the world axis not the local axis. This is not what I want. I want to be zeroed around the local axis.
Win 7 Pro 64Bit
i7 980 Extreme 3.33Ghz
24Gb Ram
NVidia Quadro K5000
I've created a series of images utilizing symbols.
Basically the images are of a box. Each side of the box has different content.
I create the side content flat with an encompassing rectangle. Drag all this to the Symbol Panel to create a symbol (no 9-slice no align to grid set). I then take a symbol instance and use Object > Envelope Distort > Apply with Mesh - 1 row, 1 column and proceed to transform the symbol into position on the packaging.
This works.
I can easily double-click the symbol and edit the side of the package with no problem. Exit symbol editing mode and the symbol instance(s) update. Perfect.
Until.....
I close the file. Return to it 12-18 hours later and open it to see that visually my symbols are no longer positioned correctly. I click, the symbol/emvelope is still in the correct position, but the preview on screen shows no transformation. This incorrect visual appearnce translates to print and save for web as well. So it's more than simply an inaccurate preview. The symbol has actually broken out of its container incorrectly.
To explain further.
When I save the file it looks like this:
The grey box indicates the symbol/envelope bounding area.
When I reopen the file the next day it looks like this:
The symbol/envelope is still in the correct position but the symbol contents are completely incorrect. There seems no way to reset the symbol other than to delete what's there and redo the transformations.
There is nothing overly complicated about the artwork within the symbol. It's all text or line art, no effects or transformations within the symbol itself.
1) does AE have or can be made to perform Photoshop or Flash distort, skew, warp etc. transformations?, (these save incomparable time in path editing rather than AE's limited transforms and manual point and tangent realignments)
2) when shape(mask) tweening in AE is it capable of what Flash calls ease-in/out, or what Illustrator and CorelDRAW calls "speed"or "acceleration" respectivly?
OS: MS Windows7 Ultimate x64, v6.1.7601 SP1 build 7601
PC Config.: Intel Core2Quad CPU Q6600 @ 2.4GHz, DG33FB, 8GB RAM
CDGS x6 (64 bit) v16.0.0.707
1. Facing problem of frequent CorelDraw X6 crash while working and seemingly most of the times it even don't sent any error messages to Corel support.
2. Transformations docker doesn't accept enter for applying changes, it only responds when we hit apply. It is good to move through options by using TAB, but it should accept ENTER as “APPLY” as we make desired change in any parameter. Mostly I prefer dockers to property bar.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key.
4. Using pick tool double click a group of objects including paragraph text and get desired rotation is still a havoc despite we are using x6 (64-bit). It kills much of our time. See screen shot below:
5. I am also facing problem in EPS editable import as shown in the screen shot below "An error occurred while processing PIEE.eps. The file cannot be opened."
The file is created in x6 and has 2 pages for two print jobs. Both pages has flatten background text and fountain lenses to RGB bitmap. All texts converted to curves. Page 1 exported to EPS and then imported as EPS editable successfully. Page 2 exported to EPS and then imported as EPS editable - shown above error. I have also tried importing this page to a fresh file and then created fresh EPS but got the same erroneous result.
As far as my experience with PDF is not good, because sometimes PDF also produces undesired result on RIP specially as RGB images, bar codes, drop shadows etc. I believe that EPS files are far more reliable in prepress jobs.
I need to design a walking track 1 mile (5280 feet) from a starting point and finishing at the same point. I need to go around buildings, ponds, etc. What is the best way to tackle this? I thought about 16 splines at 330', but as soon as the spline is moved the distance changes.
View 2 Replies View RelatedI need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View RelatedI am looking for something a lisp or program that would do a light point by point of fixtures in a plan.
[URL]
Civil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedIm still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedWhat's the difference between the "Point" Parameter and the "Base Point" Parameter in the Block Authoring Parameter Pallet?
HP DV7 Laptop
Intel Core i7-3820QM 3rd Generation Quad Core 2.7 GHZ CPU
16 GB DDR3 RAM ( 2 DIMM ) / 180 GB SSD
Nvidia GeForce 650M Graphics w/2 GB Memory
Windows 7 Professional 64 bit / AutoCAD Civil 3D 2014
I'm trying to draw a plan of my house in Autocad 2009 but I seem to be endlessly using trim and extend because I can't easily select the points that I want with osnap. Eg. imagine I have a box, and I want to start drawing another box inside it that has each side as 10 units smaller than the corresponding side on the outer box.
Step 1 - I draw a small line from the top left corner of the big box using the endpoint snap, typing in "5" for the length.
Step 2 - I then do the same at right angles to the first line to get me to the starting point of the inner box. This always leaves me with 2 small lines to remember to delete.
Step 3 - Then in order to draw the top line of the inner box I end up drawing to a random length because I can't say "draw until 5 units away from the right hand side of the big box", then I end up trimming it later once I've repeated steps 1,2 and 3 for the next side of the inner box.
I know in my example above I could have scaled the box down or something but that's not what I'm getting at. I really want a way of selecting line start and end points that are a known position away from an existing point.
I have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
In uploading the Point input data into the AutoCAD Civil 3D 2013 software program, is it possible for me to add more Point Attribute items after Point Number, X, Y, Z? I need to have the chemical results/data attached to the (sampling) Point that has the Point #, X, Y, Z - like Point Number, X, Y, Z, Arsenic, Lead, Mercury in the input .txt (or .csv) file.
View 9 Replies View Relatedhow to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
How to set a default point style for point groups? Whenever I import survey points, I always put them into their own point group, so I can display each day's worth of survey data differently. For some reason, the point style always defaults to a certain style (our control point symbol). I'd like it to default to Basic, so I don't have to change this every time. Is it a template drawing setting somewhere?
View 5 Replies View RelatedFirst time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
C3D 2012
Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:
I am working on a utility map with water valves and hydrants. I collected my points with a Trimble unit and converted them to shape files. I am unable to snap to these points, how i can use snap to draw my water mains from point to point?
View 5 Replies View RelatedI'm inserting blocks into my drawing and the block has a basepoint and a 0,0,0 point. The CAD guy who usually works with me is off today but he has a keyboard method of switching between the 2 points when inserting the block.
Its a fairly straight forward thing on his keyboard, nothing he has set up but standard in autocad.
I've had a try hitting a few keyboard buttons this morning but can't seem to do it.
I am trying to get point 1234 to show a label that says Point #1234 and then in a grading plan have that same point show up as a spot elevation. I have tried making two point groups "Point #" and "Spot Grades" which include the same points in them with two different label styles for each group, however the point seems to only want to take one label style at a time.
C3D 2012
Win 7 x64
8 GB Ram
Quadro K4000
How can find closest point from point to a region?
Windows 7 (x64)
AutoCAD 2012 (x64)