AutoCAD .NET :: Reading DWG Files In ASP Framework
Jul 18, 2011provide me with the code in ASP.net C# to read the .dwg files?
View 2 Replies
ADVERTISEMENT
AutoCAD .NET :: Reading / Comparing CTB Files?
Dec 5, 2011is there any way to compare ctb files? I know there is a tool called tableprint9.exe that will export the ctb as text but it is not working with Autocad 2010.
Is there any way to access ctb files in .Net?
AutoCAD .NET :: Reading In Mass DXF / DWG Files
Jan 8, 2013i am developing some code to read in mass dxf OR dwg files, seperate the two, then convert each to a database to be read later. however, whenever i run it, i get this error: System.AccessViolationException:
Attempted to read or write protected memory. this is often an indication that other memory is corrupt.
at AcDbDatabase.dxfIn(AcDbDatabase*, Char*, Char*)
at Autodesk.AutoCAD.DatabaseServices.Database.DxfIn(String fileName, String logFilename)
at ZahnerCommands.Commands.GetFiles()....line 72
here is the code that i have so far. i have been tinkering around with it for a few days and cannot seem to get it to work. the dxf file i have chosen works perfectly well, and i am using autocad 2011.
using
Autodesk.AutoCAD.ApplicationServices;
using
Autodesk.AutoCAD.DatabaseServices;
using
Autodesk.AutoCAD.EditorInput;
using
Autodesk.AutoCAD.Runtime;
[code]...
AutoCAD LT :: 2014 - Reading Earlier (2010) Files
Jul 2, 2013Can Autocad LT 2014 read Autocad LT 2010 files?
View 3 Replies View RelatedAutoCAD .NET :: Framework Error When Trying To Launch Application
Jun 15, 2011I've created a deployment for AutoCAD2011 x64 to be installed via SCCM. I've followed the instructions to create an SCCM package that were provided on the support website, as well as what comes on the CD. While I'm able to create the install and deliver the package, I get an error when trying to launch the shortcut (AutoCAD 2011 - English).
The error is a Microsoft .NET Framework error that states:"Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.Access to the path 'C:Program Files Autodesk AutoCAD 2011Migration' is denied.
I went to check on the folder security and realize that the Migration folder doesn't exist.
AutoCAD 2013 :: Reading And Writing 2010 Files In 2014?
Dec 3, 2013I have drawings that are saved as ACad 2010 and need to work on them in ACad 2014. I am receiving error messages saying the drawing is damaged and requires recovery. Errors are being detected and some files I can eventually open but edits are missing. Others I am unable to open and I get a message "audit could not correct errors in database".
View 3 Replies View RelatedAutoCAD 2010 :: Net Framework 4 Not Installing Correctly / ERROR 643
Jan 16, 2012I have tried unistalling framework 4 and reinstalling using the standalone installer. I have also used the framework clean up tool with no luck. I have tried to repair the installed framework 4 with no success. I have tried all of this with my antivirus turned off and I have tried to use Microsoft fixit along with running Ccleaner registry fix.643 Error.
View 3 Replies View RelatedAutoCAD Inventor :: Reading Solidworks 2012 Files Directly Into System
Sep 3, 2012We are using Inventor 2012 and would like to read Solidworks 2012 files directly into the system. This can be done with Solidworks 2011 files but our vendor upgraded his software between the time he sent us test files to try the import and now. Can you tell me if the is a plug in or something that will allow us to read SW 2012 files or should we upgrade to Inventor 2013?
View 6 Replies View RelatedAutoCAD Inventor :: Addin Does Not Work When Changing Target Framework
Oct 24, 2012I changed the target framework for my project from .NET Framework 2.0 to 4.0, and also changed the Inventor.exe.config file to read
<supportedRuntime version="v4.0"/>
Now when I debug the ribbon tab that I am creating is nowhere to be found, but if i change back to 2.0 and debug, the ribbon tab is back.
AutoCAD Civil 3D :: Adding Framework Info To Title Block?
Jul 12, 2012Is there a way to display the projection (FL-W83) or Datum (NAD83) of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort? I belive the information resides in the .NET framework, how can I get that into my titleblock?
HP Z400 Workstation
Intel Xeon W3550 -Cores 4
12GB Triple-Channel DDR3 @ 533MHz
2-HP LE2201w @ 1680x1050
ATI FirePro V3800 (FireGL) (HP)
MS Windows 7 64-bit
AutoCAD Visual LISP / AutoLISP :: Reading .xlsx Files And Modifying A Block?
Feb 7, 2013Is it possible to write an AutoLISP script to read an .xlsx file and use the data in the various cells to modify a block within a .dwg?
Ex.: We use Flow Control Modules (FCMs) and use AutoCAD Electrical to show electrical contractors where/how to wire up the devices. In AutoCAD, we have blocks for various types of FCMs, and each block has terminals which are tagged DESCA1, DESCA2, DESCA3, etc. Each of these tags will change based on what the particular FCM is used for.
We also have .xls(x) files we call FCM Maps, which come from our engineers and tell the drafters how to lay out the .dwg files.
Is it possible to write a LISP script to take, say, cell A1 from the .xlsx file, and put that data into DESCA2 in the block, cell A2 into DESCA3, and so on?
AutoCAD Civil 3D :: How To Convert Surfaces File Into Navisworks Format And PDS Framework Plus
Feb 8, 2012Is that possible to convert surfaces from Civil 3D 2010 file into Navisworks format & PDS framework plus?
Or Is that possible to view in Navisworks?
Lightroom :: Not Reading JPG Files
Nov 14, 2012I am a new Lr user, but have spend several hours experimenting with the product, so I have some familiarity with it. When I plug my card reader in my computer, Lr only sees the NEF files. I know I have both JPG and NEF files on the card, but Lightroom is not seeing the JPG files.
View 4 Replies View RelatedLightroom :: Raw Files Not Reading?
Aug 21, 2013i was downloading my raw files from canon mark II and importing into Lightroom 4, i got half of them loaded but the rest didn't load bc it said it couldn't read the files. and they say zero bytes and i can't open them or see them in my external hard drive also.
View 5 Replies View RelatedLightroom :: 4 Reading Files
Jan 5, 2013I recently transferred my RAW images into LR4 and it is not listing them in the "Folders" on the left of the "Libray" screen. Files are in tact on my hard drives, however after import LR4 is not finding them. They are being read and listed on my backup drive however they will not come up on the main hard drive.
View 9 Replies View RelatedPhotoshop :: Reading Canon 5D MK III Raw Files In CS4?
May 25, 2012How do I read Canon 5D mk III images in PS CS4? I know the new ACR 7.6 upgrade doesn't apply to 4 so what's the work around?
View 4 Replies View RelatedPhotoshop Elements :: 11 Not Reading CR2 Files
May 11, 2013I just purchased and installed PS Elements 11 and it seems to be unable to read the .CR2 raw files from my Canon 6D although according to the website this camera is supported.
View 1 Replies View RelatedLightroom :: Version 3.5 Not Reading NEF / RAW Files
Dec 18, 2011I have Adobe Lightroom version 3.5. When importing my RAW/NEF files, lightroom says my "the following files could not be imported because they cannot be read." I use the option "convert files to DNG" upon import.I have a Nikon D5100.
View 6 Replies View RelatedLightroom :: Why 5 Not Reading CR2 Files On Import
Jul 24, 2013I just installed LR5 and to my dismay it gives me an error message that it can't read the files from my CF card reader (CR2) Never had a problem with this in the past on LR3, LR4. LR5 support says I have all the latest updates.
View 1 Replies View RelatedPhotoshop Elements :: Reading RAW Files From OLYMPUS
Mar 13, 2014Can Photoshop Elements read RAW files from Olympus OM-D E-M10 or if not can the files be converted to a compatible format?
View 4 Replies View RelatedPhotoshop Elements :: 11 - Reading Raw Files From Canon 70D
Jan 9, 2014I have Photoshop Elements 11 and just got a Canon 70D. How can I get the program to read the raw files?
View 9 Replies View RelatedLightroom :: 5.3 Suddenly Stopped Reading Files
Feb 16, 2014Window 7 64bit
quad core, 8 GB RAM
Olympus EM-5 and E-5
Yesterday Lightroom handled a bunch of files from these cameras and today it gives me a message "The following files were not imported because they could not be read." same answer for both ORF (Olympus raw) and jpeg's. The files will open in Elements. Reformattng cards both CF and SD) uninstalling LR and downloading a new install.
Lightroom :: 3 Not Reading TIFF Files From Photoshop
Oct 2, 2012It was working ok and then LR 3 stop bringing in the images that I sent to PS (CS5) to edit..it does not bring them into my collection.
View 4 Replies View RelatedLightroom :: 3.6 Not Reading NEF Files From Rented D600
Jun 13, 2013I shoot RAW on my old D80 all the time, and have never had a problem. It won't read the D600 files.
View 7 Replies View RelatedPhotoshop :: CS4 Stopped Reading CR2 Files - Update Failed
Jul 19, 2013My Photoshop CS4 quit reading CR2 files from my Canon EOS 5D Mark II. Photoshop update with new raw version failed.
View 9 Replies View RelatedPhotoshop Elements :: Reading Canon Bridge Raw Files?
Aug 16, 2013How can I read a Canon cr2 raw file into PSE 10 ?
View 6 Replies View RelatedLightroom :: 4.2 Stopped Reading Files In Middle Of Import?
Oct 16, 2012In middle of an import via a card reader, LR 4.2 stopped importing. dialogue box said could not read the files. Tested cards and cardreaders for two different cameras - same dialogue box comes up. response is there area many bugs in LR 4.2 and Adobe is ignoring. One Adobe spokes person suggested optimizing and restarting. haven't tried it yet.
View 10 Replies View RelatedEdge Animate CC :: Reading Text Files And Databases
Nov 20, 2012Are there any good tutorials on reading/parsing text files and databases out there? I've been looking around, but I can't really find anything.
View 12 Replies View RelatedPhotoshop :: Why Is Camera Raw Not Reading Nikon D600 Files After Updating To 7.3
Dec 19, 2012I have updated to ACR 7.3, my Photoshop is version 13.1 x64. However, I still cannot read the RAW files from my Nikon D600 with the message to check if there is an update for my cameras raw files available.
View 3 Replies View RelatedLightroom :: 3 - No Longer Reading Raw Files Imported From Nikon 7000
Aug 16, 2012Had the operating system of my Macbook cleared, then reinstalled my copy of LR3. After first import from Nikon 7000, received message that raw files of this camera are not compatible with my LR. Puzzling, for I have loaded on this computer with this copy of LR3 from this camera thousands of raw files.
View 3 Replies View RelatedAutoCAD 2010 :: 2011 Reading Exported Files From Revit 2010
Aug 18, 2010Our company just upgraded to AutoCad 2011. We get files from our clients that exports their files from revit. It seems that Autocad 2011 slows down when reading this files (cursor will have a second or two delay).
View 2 Replies View Related