I have a circle that I would like to move ‘Z’ direction along the Current UCS. The Current UCS can be in any 3d plane.The code that I have only moves the circle 5 units up along the WCS.
Dim Zp As New Vector3d(0, 0, 5) Zp.TransformBy(ed.CurrentUserCoordinateSystem)myCircle.TransformBy(Matrix3d.Displacement(Zp))
I'm new to Inventor and I've been working on a complicated part for quite some time. However, I've just realised that I've made an error at the very beginning. I'm drawing the part in the YZ plane and extruding along the X axis. My problem is due to the fact that I began the drawing at x=0 when I should have began at x=7780mm. moving the entire part in the positive X direction? I've tried several approaches but none seem to work.
View 9 Replies View Relatedi found the problem of dimension when moving the whole object inclusive the dimension to any direction.
View 2 Replies View RelatedIs there a way to move a solid part in an assy using grip snaps and a specific vector direction .
Please look at the attachment,here you will see a gusset positioned on top of a foot plate,the gusset needs to be moved so that it makes contact with the cylinder,it will then be welded. The problem is more difficult because the gusset is offset to the axis of the cylinder and the precise distance is unknown unless worked out using trigonometry.
The question is what is the best method of moving the gusset to the precise distance and direction ?
there are some points in my dwg that I can't move. I can rotate but not move. I noticed in the point file the ones that I can't move have a grey square in the cell with the point number and the ones I can move have an empty circle. How do I change the square to a circle?
View 7 Replies View RelatedI'm following some tutorials on digital tutors and I see that an easy way to preview the frames is just by simply moving the time indicator, and the frames will play in real time by just moving the current-time indicator back and forth.
However, it doesn't work for me for some reason, when I move my current time idncator, the only thing see is the frame what it was on, and won't update until I let go of time time indicator.
I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies View RelatedI have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies View RelatedIt is my understanding that in Photoshop Elements I am able to place a circle around a moving object or person and have that circle stay with/track the moving object or person as the video plays? Is this correct??
View 1 Replies View RelatedUsing Autocad 2000LT and trying to locate as many 1.5" diameter circles as I can within a 21" diameter circle keeping all the circle .500" apart from any other circle and .500" away from the outer edge. Am using the array function. Trying to bring the first circle up to the line thats .500" in from the 21" outside diameter.
First when I zoom the 1.5" circle looks like a series of lines, not a smooth round circle. First how do I smooth out the appearance of the circle. Second, what commands do I use to move the edge of the circle to just tough the line so that when I measure from the outside dia to the far edge of the small circle I get 2".
I have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
how can i know if the current view/display is align with the current ucs?
let's say i have rotate the ucs about z axis 45 degrees and make it plan now i draw some things and then i change back to world
worlducs = 1
viewdir = 0,0,1
ucsxdir = 1,0,0
ucsydir = 0,1,0
but the display is still in the ucs z 45 (ucsfollow = 0) set the view to PLAN current (now the view is aligned) but the system vars does not change.
For a plan UCS, you would need to compare the VIEWDIR system variable and the cross product of the UCSXDIR and UCSYDIR system varaibles.
[URL]
Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.
View 3 Replies View RelatedTechnique that can check the current plotter name for the current tab and assign it to a variable? i.e. can it be assigned to a variable to check if if equals "myplotter1". The next step - is there a technique to change the plotter name to "myplotter2.pc3".
I have partially done the latter part of this in the past using the -plot command line to ASSIGN a new plotter but I would really like to only run the routine if it really needs to.
I have 1 Next button that is used on the timeline. Each position has a pause then a play so there is only 1 button. I need to get the label info so I know where I am so I can save the location of the timeline that the user was at if they exited before they finished the process.
View 6 Replies View RelatedI need to find the center of a circle that is tangent to another circle and a point on a line. I cannot use tangent tangent radius.
View 4 Replies View RelatedI want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
I was wondering the best way to draw a circle that passes through an endpoint of a line and then is tangent to another circle above it? I need to create a radius of 3.5 between the two points.
View 9 Replies View RelatedI have made this planet and I want its ring to look as it's spinning around it, So the upper of the ring should go behind the actual planet! How can I do that? Also how can I add some volume to the ring to make it look a bit more realistic?
View 5 Replies View RelatedI can't believe that in Acad 2006 there's no way to scale an object in one direction only e.g. in x direction scale = 1.15, in y direction scale unchanged i.e 1.0. Mstation does it - surely there must be at least a workaround in Acad?
View 9 Replies View RelatedHow to make a type of material go in one direction or by another degree . Ex: if you click on a wood type material, it goes up or down and right or left depending which side of that object is. On the picture below, it goes up and down, side to side no all sides go in one direction. I need to know how to mange the direction of the way of where the material go.
View 7 Replies View RelatedI just upgraded to AutoCAD Lt 2012. In the settings, I was able to figure out how to automatically get a landing line and how long I want it to be. But! When I draw the leader to left of center, it puts the landing on the left side of the line. How can I turn that auto-directional thing off?
View 4 Replies View RelatedIs there anyway to lock the direction of polylines? I have several drawings with diversion ditches. I use the linetype to show the direction of flow but antime I have to change ltscale or linetype, it reverses the direction. This can be an easily overlooked situation and a time consuming one to correct.
View 4 Replies View Relatedsweep.jpg
View 9 Replies View Relatedis it possible to define a 'natural direction' at a pin, in which a wire should start when connected to that pin? This would seem to be natural for me.
As the attached picture shows, my wire is connected at this pin in a weird direction (because I need to route it through the indicated segment).
What is the best strategy to do it correctly?
Another question: I increased the diameter of the segment, hoping that it means that the wires are constrained within the segment, but are free to move withini this. But they all seem to be constrained to the centerline. What I want is that all my wires pass within this 'tube' of 30mm diameter.
If you have a collection of balloons you can make them go horizontal or vertical. Is there any way you can make the balloons to go in a 45° angle?
View 1 Replies View Relatedcan I place a direction arrows on 3D polyline in dwg files? In 2D, it is very simple.
View 9 Replies View RelatedI've just started creating my own dynamic blocks and if you could scale objects in one direction i.e. along X axis.
View 3 Replies View RelatedI have made line types with text and need to reverse the direction that the text reads. The text autocorrects based on UCS north. The UCS in the drawing is rotated 90 degrees so line text reads upside down. I type in the reverse command but the text does not change.
View 1 Replies View RelatedI have a polyline that meets itself back at the beginning. It should be closed and appears to be. I joined several lines to get the polyline. When I try to offset it I can only offset towards the inside and not the outside. Is there a reason for this or am I doing something wrong?
View 9 Replies View Related