I have an array of co-ordinates (List A) from a polyline. I have one of the co-ordinate (B) from a polyline which is located around the array of co-ordinates of the other polyline (List A).
I want to detect the co-ordinate in List A which is closest to co-ordinate (B).
Known co-ordinates would be,
1. Array of co-ordinates
2. the reference co-ordinate.
How does one get the array window in 2012 to open with the array command like it does in 2007
View 2 Replies View RelatedI'm trying to use the PATH array feature on 2013 to array stairs, and I can't get the array to be 100% accurate. It seems like CAD rounds the decimal to the nearest 3/4" which could be causing the problem.
I set my run to 10.5" and rise to 7.25", array along the angle of the stringer, and there's always a small overlap on the stairs. The "distance between" should be 1'-209/256" and CAD rounds it to 1'-3/4" which is where I believe the error is. Is there any way to fix this or array this correctly? Otherwise...back to the COPY method I suppose.
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies View RelatedI know of DIMRND, but how is it possible make acad round dimensions UP (within a specified value) instead of to the nearest?
(This could be very handy to make various lengths of wooden baseboards and other mountings fit to machine cabinet standard lengths. I'd like to keep all the work in acad, and avoid ms-excel.)
My "Nearest" osnap is not even close to snapping to my circle. All other snaps are working fine, nearest snap are working on lines and rectangles, not at all on circles.
Image attached.
how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies View Relatedthere is a way I can get NEAREST snap to work on the multileaders?
END and INT (where leader crosses other entities) work but cannot use NEAREST.
Can use NEAREST on normal leaders though.
Running AutoCAD LT 2013 on Win 7 Pro.
I am looking for a way to get my dimensions to round up instead of to the nearest.
For example... when I have one line that is 11-15/32" and one that is 11-17/32" and I need them to round up to the nearest 1/4". I want it to round up, showing 11-1/2" and 11-3/4" but instead i get 11-1/2" for both.
I'm using VB.NET to write a routine that autmatically calculates the area of the polyline nearest to a block (the pline surrounds the block) an then adds the area to the blocks attribute.
I managed to write the program to do this manually for a selected pline and block.
How can I automatically select a pline nearest to the selected blocks' insertion point?
Is there an expression that will allow a parameter value to be rounded down to nearest 0.125.
Inventor 2011/2012
I want to temporarily adjust the snap mode to nearest only.
Dim sval As String = Application.GetSystemVariable("OSMODE")
sval = "4133"
I know can change this variable using Application.SetSystemVariable("OSMODE", Val) but what value to change it to.
Is there some super secret option for making fractions in the drawing environment round up to the nearest, for example, 1/16th? There has to be, there just has to be.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
One of the users on mCADForums discovered this bug.
"I have a value of 3516.41mm and I want to round it to the nearest whole number.
I have tried to use the round command and it seems to round up to the nearest 10 so 3516.41mm would round up to 3520mm. So how do I get would I go about rounding to the nearest whole number?"
I suspect this is due to Inventor's internal units being cm. However as we specific "a" to be in mm and "b" to be in mm this should not be happening.
Way to round decimal dimension values to the nearest 1/16"? For instance, 43.0599 would display as 43.0625 (On a drawing). Tried playing with tolerances, but thought it would be better addressed as customization.
View 7 Replies View RelatedWay to round decimal dimension values to the nearest 1/16"? For instance, 43.0599 would display as 43.0625 (On a drawing). Tried playing with tolerances, but thought it would be better addressed as customization.
View 2 Replies View RelatedI want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .
It's Block's OCS Coordinate not other objects.
The coordinates that we can apply in Revit (project/shared) aren't exactly the same to have real world projection coordinates (WGS84)??
If not how can we convert the revit shared coordinates to real world projection coordinates?
I have a roadway alignment and it is ending on 4+50.86, we simply want the alignment end to read on 4+51. is it possible to make this happen?
View 4 Replies View RelatedWhen labeling pipes in a pipe network; is there a way or expression to roundup the label to 6 inch interval. For example, if I have a pipe length of 2.6 feet, I want to roundup this to 3.0 feet and if I have a pipe length of 2.4 feet, I want to roundup this to 2.5 feet.
View 7 Replies View RelatedI am battling is bringing in LiDAR files from ArcGIS. I have tried TXT and ASC, and they both seem to only maintain the elevation to the nearest foot, as you can see in the attached image.
What is strange, is that when the file is brought back into GIS, this issue is a problem. Is there a setting for reducing the amount of units when importing data? The text file as I shared has data to the thousandth.
I created 2 dll's
One for autocad the other one for civil..I created another dll that loads using
Reflection.Assembly.LoadFrom("file")
the dlls into autocad at startup..I want to be able to detect if the productID is civil to be able to load the civil3d dll.
I am looking for a program that detects cheating with auto-cad? Ex. Copying one persons drawing and calling it their own. I know Universities and other technical schools have such a program.
View 9 Replies View RelatedI am using Inventor 2008. When deleting a part from the project, even if that part is not in the assembly, I still cannot open the assembly because it is pointing a link is missing. I cannot detect what is the relationship between the part and the assembly. In design assistant, the part is referenced by another part but I cannot see what is the relationship in order to remove it.
View 5 Replies View RelatedThere is a way to detect is a project is loaded using PSD VB code?
View 9 Replies View RelatedI would like to know if there is any way to detect if selected point of the selected polyline is its vertex?
1. The user is drawing rectangle or any other figure with polyline.
2. Entering command "GetMe".
3. Selecting polyline.
4. Selecting point.
Is there any built-in function in Autodesk's API?
I'm looking for an API function which would identify the version of Autodesk Inventor that has been launched. The code I"m using to start Inventor is:
CLSID clsid;HRESULT hres = NOERROR;CoInitialize(NULL);hres = CLSIDFromProgID(OLESTR("Inventor.Application"), &clsid);if (hres == S_OK){hres = aiApp.CoCreateInstance(clsid, NULL, CLSCTX_LOCAL_SERVER);if (hres == S_OK) aiApp->Visible = VARIANT_FALSE;}
I have a simple graphic (not continuous tone). I need to convert the colors in it to their nearest matching Pantone colors. Is there a way to do this in PhotoShop?
View 2 Replies View RelatedAny way to detect of there are objects currently selected using Autolisp, visual lisp or even VBA. I would like to be able to do something using that as a conditional, so that (assuming the hypothetical variable isSelected is an on/off indicator of whether or not something is selected) I can code something like this:
(if (isSelected) (...))
I want to code this lisp. The problem which I face is, In some drawings which come from the client, there are a lot of blocks.
I want to detect the blocks which has no sub-entities (but attribute) and add a rectangle inside this block, If it is an attribute add a line from 0,0, to insertpoint of attribute.