AutoCAD Map 3D :: Crashed When Open DWG File?
Sep 6, 2013FATAL ERROR: Unhandled e0434352h Exception at fd989e5dh
When open a DWG file in Autocad 2013
ADVERTISEMENT
Photoshop :: File Crashed / Won't Open - CS4?
May 17, 2012I have a CS4 file i have been working on (rendering a PDF) file got big 1.7 gig, crashed, and now wont open. I get this message: Error opening the PDF document. Error code =0x20030003. I need to recover this file.
View 5 Replies View RelatedCorelDRAW X6 :: Crashed When Open / New File Created
Jun 25, 2013Suddenly i am facing X6 crashing after an update 1. when open/new file, the software crashes : with the following messages:
Problem Event Name:APPCRASH
Application Name:CorelDRW.exe
Application Version:16.1.0.843
Application Timestamp:4fff8124
Fault Module Name:FillToolCore.dll
Fault Module Version:16.1.0.843
[code]...
Photoshop :: PSD File Was Crashed After A Blackout
Nov 1, 2012I was working on a .psd file (opened in PaintTool SAI) when there was a blackout so my laptop was crashed. When I opened it an hour later, the .psd file was ruined; all layers flattened to one black background layer; and no matter how many programs I tried to open the file, it's still the same black image.
Is there any possible way to recover my .psd file before it was crashed?
Photoshop :: CS5 - How To Recover Crashed File
Mar 20, 2012My .psd (cs5) file crashed. Is there anyway to recover it.
View 9 Replies View RelatedVideoStudio :: X5 Crashed - Where To Send DMP File
Jan 7, 2013X5 just crashed and a dialogue showed up asking med to contact Corel support and send them the DMP file.
I find it a little strange that they don't offer a direct upload option of the DMP file as a part of this dialogue, but it's probably me who is a little strange...
Anyway. Is there an email address or something where I can send this DMP file? It would be much faster than getting in touch with Corel support.
GIMP :: 2.9.1 Plugin Crashed / File TIFF Load
Nov 3, 2013I downloaded/installed the PPA for Gimp 2.9.1. It worked great for the first half dozen 16-bit tiffs.I use a few RAW converters to create these tiff tiles, RawTherapee, UFRAW, and the Sony software supplied with my A700 DSLR, Image Data Converter running through Wine.
At any rate, most of the tiffs I create now cause Gimp to crash when opening new files. I get this message: Plug-in crashed: "file-tiff-load" and Opening '/home/caruso/Desktop/PHOTOS from IDC/DSC06219.tif' failed:
Files created previously continue to open as normal.
I was so thrilled to have succeeded in installing 2.9.1 on my system, but now may have to uninstall it and fall back to 2.8.x.I realize that 2.9.1 is experimental and unstable, but would like to know if this is something simple that can be fixed.
CorelDRAW X3 :: Hard Drive Crashed / Need To Convert Exported File Back To CDR
May 3, 2011My hard drive crashed so I lost a lot of my CDR work. I was able to get some back in the form of JPG. These were files that I drew in Corel and Exported as JPG. Is there anyway I can get them back into Vector without re drawing? I figured there had to be a way since they were originally drawn in Corel.
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: Crashed (Corel ARM) When After Exporting JPG Close The File
Apr 25, 2011I have a major problem with PhotoPaint X5 after SP2. I have an image of a movie poster from internet. Let's say about 1000x1500 pixels. I make the width 300 px. (height will be 440 or more) Than I make a new document of 300x430 pixels. Copy and paste the first file into the second. Move it up and/or down with the arrow keys to have a good composition. Than I combine the image with the background (shift/control/arrow down) and save it to rest.jpg. When I want to close the original image in CorelPaint I get the Corel A.R.M. window. I tried a few times without combining the image to the background and than I CAN close the file without crashing PP. I'm glad I found a workaround since I do these actions quit a lot for my movie and music database. But it took a lot a time to figure out where it went wrong. So according to my tests it must have something to do with combining the image to the background. Sometime when nudging the image a couple of times up and down crashses PP too when I then combine the image and background. At that point i don't come a far as exporting.
View 9 Replies View RelatedAutoCAD Civil 3D :: Unable To Open File Explorer Windows / When Select Open / Save From File Menu
Mar 1, 2011I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedAutoCAD LT :: 2008 Program Has Crashed
Jan 10, 2012My AutoCAD LT 2008 Program has crashed and all attempts of uploading it again has not solved the problem. This is the error message I am receiving.
Problem signature:
Problem Event Name: APPCRASH
Application Name: acadlt.exe
Application Version: 23.1.51.0
Application Timestamp: 45d008e7
Fault Module Name: ac1st17.dll
[code]....
AutoCad :: Crashed And Toolbars All Missing?
May 6, 2013as above.....desperately trying to find them.
still got dashboard, palettes, design center and properties but absolutely NO toolbars.
AutoCAD Inventor :: Set To Display Full File Path For Current File Open
Oct 3, 2012I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Civil 3D :: File Dates Shown Incorrectly In Open File Dialog Box
Apr 24, 2013I'm using Autocad Civil3D 2011, Version 3. Just yesterday I noticed that the file date shown in Autocad's open file dialog box shows an earlier time than Windows Explorer, which shows the file date and time correctly. When I enter the "time" command on the autocad command line, the correct time is shown for the "last updated" time.
For example:
The Autocad open file dialog box shows the file having a time/date of 4/23/2013 3:54 PM
Windows Explorer shows the file having a time/date of 4/23/2013 4:10 PM
"TIME" command at autocad prompt returns the following:
Current time: Wednesday, April 24, 2013 3:55:35:454 PM
Times for this drawing:
Created: Thursday, March 27, 2008 5:49:57:104 PM
Last updated: Tuesday, April 23, 2013 4:10:56:299 PM
Total editing time: 17 days 15:31:26:967
Elapsed timer (on): 17 days 15:31:26:967
Next automatic save in: 0 days 00:09:58:237
I rebooted and restarted autocad, and resaved my file with the same results (although with different times-but again the autocad open file dialog box showed an incorrect, earlier time). I have never had this problem before, and it is driving me crazy as I usually sort my files by date to assure that I am working with the latest file.
AutoCAD Inventor :: Possible To Retrieve Information Of Reference In Iam File Without Open File In Session
Oct 30, 2012is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
AutoCAD 2010 :: Preventing PDF Viewer To Open Drawing File When Plotting To PDF File?
Mar 9, 2012As an engineering company we have started to convert hundreds of our drawings from AutoCAD to PDF using a batch utility.
However every file that is converted into a PDF file is opened by a PDF Viewer. We want to prevent this.
I opened my *.pc3 file and removed the check from the appropriate box. See below
I press OK, then save the file and close. However when I reopen the file, I see the box for Openining in PDF Viewer has been rechecked. No matter what I do, I cannot permanently remove the check from this box.
AutoCAD LT :: 2011 Program Freezes When Accessing File Command To Open File?
Mar 22, 2011I am unable to use the file command open, new etc. I click on open and nothing happens no file box opens. As soon as you do anything else the program says not responding and you have to close it down. I can click on an autocad file in windows explorer and bring up the file this way but as soon as you try any file command such as save as the program freezes again. I am running windows 7 professional and the autocad LT 2011 64 bit program.
View 9 Replies View RelatedAutoCAD 2010 :: 2 Files Open - Upon Quitting Of 1 File Other File Goes Black
Jun 10, 2012When I have 2 files open, one minimized and the other visible on the screen, when I quit the file showing on the screen and then open the one that was minimized, it comes up w/a blank black screen. There is no way I have found to get the info in the file to display.
Then, if I save the blank screenof previously minimized file, close it then reopen it the info is back on screen with changes made to the file intact.
AutoCAD LT :: Attempt To Edit Text Crashed?
Oct 12, 2012Running on WinXP SP3 / AutoCAD 2012 LT.
Whenever I use MTEXT or DLI, I can't edit the text box that is created without it crashing AutoCAD. Not sure if this would happen with other commands, but it seems to be linked to editing the text blocks.
AutoCAD Visual LISP / AutoLISP :: Script File To Open Multiple DWG File Not Working In 2012
Dec 22, 2011I am trying to make a script file to open a drawing and run a lisp routine. They both work independently just fine, the script file will open the all of the files fine... and the lisp is in the startup suite and works in all the files. But when I tell the script file to open the first drawing then run the lisp it hangs trying to open the next file after running the lisp. I have Filedia set to 0, but the message I get when it goes to open the next is "No canvas exists. click New Canvas." (And on top of that... Filedia even set back to 1 still does not display the Dialog box anymore, I have to shut down AutoCAD 2012 and start again then it works.) I Have tried several ways, Opening one at a time then run lisp, and open all files first and then try to run lisp (that closes the file after running) and try and run it again in the next... It will only run the lisp one time and then locks up from there.
View 7 Replies View RelatedAutoCAD Inventor :: Open File - Save File Automatically
Apr 29, 2013if i need to rename or change anything in the iproperties of ipt, im doing it from the vault.my problem is that, when i change something in iproperties of an ipt thru vault, i have to open the idw to update it.
as most of the iproperties in ipt shows in the idw.
its easy to change the properties in vault. but its deleting its purpose if i have to each idw to make sure i have the updated idw.is there a code where i can open all idw and save the same file and checking to the vault automatically?
AutoCAD 2013 :: Failure To Open FLS File When Trying To Index It Into PCG File
Aug 9, 2012I want to create an AutoCAD point clound (.pcg) from a FARO laser scan file (.fls). When I go through the steps in AutoCAD Mechanical 2013, I get the following error (see attached file for screen shot):
Progress.......
Failure! - Fail to open scan file.
Complete, 0 point cloud created, 1 failed.
AutoCAD Civil 3D :: Multithreaded File Open File Save?
Jul 8, 2013Civil 3D 2013.One of the problems my team has is that we have a number of remote offices that all work on the same drawings. To ensure integrity of the drawings, we use a Wide Area file replication and locking service to ensure the files do not become out of sync and corrupted between offices.
AutoDesk seems to open and save files and their subordinate xrefs serially in a single thread instead of in a multi-threaded manner. Because of this there is a Huge time impact on just opening and saving files at remote sites as a result of Civil 3D having to wait for the home office file lock check on each and every file before opening the next file.
We have 100Mbit down / 20Mbit up transmission links at both sites dedicated to the file replication, with Gbit backbone in both offices.
note that the remote site has a full copy of all files in its replicated share. These local files are what Civil 3D is opening. No Files are being transferred during file open unless a remote change has just occurred (proven through replication logs).
When the drawing file is opened for editing, a file lock check is performed and Windows waits for the response to ensure it can be opened for editing before telling Civil 3D. When Civil 3D has this file open, it has a list of all the xrefs for this file. Civil 3D then seems to open each file in sequence.
This is a problem when a large latency is introduced through our 3rd party Wide area file system by a remote site file lock check.
This is not AutoDesk's fault but the compounding of the two system's operational behaviours, causing a Very long wait on file open, Save, PaperSpace operations (30 minutes for large drawings).
I would like to see a multithreaded (threadpool) file open occur against the entire list of xrefs (during save as well). Then recursively executed for all subordinate xrefs of those files until the operation is complete.
As long as a file list is maintained during the operation and updated as each file operation completes (which obviously it is) in the primary thread, this should not cause any problem. All dependancies can be opened in sequence once the initial file operations are complete and when a particular file in the list is required but not open yet, it's priority can be raised in the threadpool.
AutoCAD Architecture :: Outlook Crashed And Get Error Message
Jul 10, 2012When i open outlook i get error message
" Error:: Installation of Autodesk Architectural Desktop 2005 requires Administrator Privileges. Please log in with administrator rights before attempting installation of Autodesk Architectural Desktop 2005. "
I have 2 computers on the network with the same issue (one use outlook 2003 and other use outlook 2007)
AutoCAD LT :: How To Find File Quickly When Open File
Oct 2, 2012I want to open a file in a fold with hundreds files there, every time when I click the open file, the select file box only show the top 10 files there. How to set to see the previous file which I opened before.
View 4 Replies View RelatedAutoCAD Map 3D :: File Open Dialog Box File Name Selection?
Jul 31, 2012When I go to the file open dialog box and start typing in a file name the the file name box it does not show a list of drawings that match the search in the file name box.
View 9 Replies View RelatedAutoCAD .NET :: How To Open File Dialog And Then Insert Another File
Apr 6, 2012First, I am developing with the following system environment.
- ObjectARX 2011
- AutoCAD 2010
- C# with VS 2008
I am making a custom command that opens a open file dialog to prompt the user a dwg file.And the programmatically(automatically) insert another dwg file to the opened map.So what I tried to find a method to open a open file dialog, but couldn't find it.So next I tried to execute "OPEN" command programmatically. The following code is what I tried...
Application.DocumentManager.MdiActiveDocument.SendStringToExecute("OPEN", false, false, false);
and changing the second parameter to true...
Application.DocumentManager.MdiActiveDocument.SendStringToExecute("OPEN", true, false, false);
When I run the custom command, nothing happens. After opening a file, I want to insert ("INSERT" command) another drawing onto it. How could I achieve this?
CorelDRAW Graphics Suite X4 :: Unable To Open Desired Folder By Clicking Open File
Feb 6, 2013In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedPhotoshop :: Unable To Open Files From The File OPEN On MAC
Jan 21, 2009I am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
Illustrator :: How To Open Files As Layers In Open File
Mar 1, 2013I'm working with both Photoshop and Illustrator CS6 on a mac. I'm creating a graphic. The background is a (cartoonish) mouth and I finished it a couple of days ago. (It's an Illustrator file.) I've been working on the letters to go inside of the mouth, (Once I'm finished it'll look as though they're being crushed.) I scanned and edited small wooden letters in Photoshop, and now I would like to work with them with the background in Illustrator. I understand how to open a Photoshop file in Illustrator, but I don't want to open the document as a separate Illustrator file. Is there a way to open a file from Photoshop as a second layer?
Some of the letters repeat as well. Will I have to create two files for this, or can I open the same file twice?
Lightroom :: Open A RAW File In The Develop Module ACR Is Not Open
May 27, 2012When I open a RAW file in the Develop module ACR dsoes not open. What am I doing wrong?
View 3 Replies View Related