I have a drawing that I'm having issues with, all of the Lwpolyline that we have in our drawings are not filling in the arrow part.
I have checked to verify that the fill is on, fillmode is on, Apply solid fill is on on the Display tab of options.
It isn't a leader arrow, but I did verify that the Arrowheads are all selected to Closed filled. Regen does nothing as well.
What is a LWPOLYLINE? What makes it 'LW'? Why would one use one? How can one draw one?
View 9 Replies View RelatedWe use only polyline when drawing. Plinetype is set to 0.
First problem is with J (join) command. Sometimes when we try to join different polylines it kills a vertex. Example if i have two polylines (they are not joined) that forms a rectangle it will join them but kill one vertex and turn it into triangle. This dosen't happen all the time.
Second problem i figured a way round for the problem above, if i use the pedit command and then use j the above problem never happens. But instead (also not every time) it turns the joined polyline into lwpolyline. So its all pretty anoing as we have to use convertoply.
Is there some other command than plinetype to resolve his problem.
I have three dwg files. Each of them have separate MrSID files (image files) attached by georeference. Each file also has one or more polylines and hatch objects on top of the image.
ONE of these dwg files is causing problems. EVERY SINGLE TIME I plot the dwg file, the hatch and lwpolyline objects are UNDER the image. So I have to copy the hatch on top of itself and delete the original--then do the same with the pline.
I recently wrote a lisp routine that was supposed to get the 4 coordinates of a rectangle (LWPolyline). It worked fine in *MY* tests. But when someone else ran it, the routine operated as though the order of the points had been rearranged.
How can I get the points AND the order in which they belong?
Here's a sketch to show you what I mean. As part of my troubleshooting, I had a lisp routine draw a new pline using the points gathered by my first routine. The result of that on the left. On the right is the result of that when someone else runs the two routines.
Here's the code I used to get the points.
(defun getplinepointlist(ename)
(setq ent(entget ename))
(setq ptlist (list))
(while (setq pt(cdr(assoc 10 ent)))
[code].......
I'm having an issue with my poly lines. they aren't filling in. And its only in one drawings. Even if I do a solid it comes in not tilled in. I tried doing the fillmode but that didnt work. I tried the shademode but that didnt work either. I'm not sure what else to try.
View 5 Replies View Related1 Do I create feature lines at toe , then vertical between the toe and the cliff , then use the grading & elev.editor
2 Once I obtain the infill surface l, how rotate or orient the model w/ rocks so this photo 3 is draped over it.?
Is there a way I can fill the gaps in this surface? The surface is a combination of four pasted surfaces with boundaries set so they dont overlap on each other and create a mess.. I can't have these holes/slivers in it because SiteVision wont accept it. So basically is there a command that will fill the gaps in for me?
View 5 Replies View RelatedI'm trying to plot my dwg to a PNG file using the PublishToWeb PNG.pc3 plotter but it will not use the whole image size for my output. To the right where is a white vertical line that's not used, very annoying. I'm using a custom page size but that size has the exact dimension (1280x720) as the selected window.
I have also tried the PublishToWeb JPG.pc3 plotter with the same result and I have also tried it with AutoCAD 2011 with the same result.
I'm attaching my test DWG, it's a black rectangle with a solid hatch, and the resulting PNG file. I also attach my settings from the plot dialog.
What's the right way of taking care of this gap?
View 2 Replies View RelatedI just tried to do a solid hatch I was filling some walls in plan. No matter how hard I tried it wouldn't let me do it. I didn't get any message asking if I had closed boundry etc. I have tried again a few times and no good. I rebooted computer, just in case, but still no good. I was doing solid hatching just the other day and am doing nothing different.
View 1 Replies View Relatedcreating infill at the grading example from the civil 3d tutorial "filling holes in a grading" (grading-6.dwg) failes when selecting the area to fill. The command finshes whithout changing the model. There is no diamond symbol displayed.
Why i am not able to select the area?
I am trying to find a volume of land cutting filling at particular level?
I import point file in surface 1
How to make surface 2 for particular level ..
I'm selecting a shirt, then I do a fill with new color. Only annoying things is I have to guess and fill then guess and fill.
way to do this and be able to see on the fly as the color changes in the shirt?
So my friend is making these designs on paper and i am tasked to put them into photoshop. The problem is when i scan them in they are patchy they look horrible. Is there a quick way to fill in the lines or do i need to find a better way to transfer drawings onto the computer such as a better scanner?
View 1 Replies View RelatedI need to have a border of about two inches around my painting in the same color as the background of the painting. In the past, I've cloned the color out to my desired dimensions,
I want to open a new window in photoshop of the dimensions I need.... fill it in with the color of the background of the painting, move the painting into this new window, flatten it and print it out.
How do I fill the new blank document with the correct or close color?
This is a basic question as I am a novice with both Illustrator and Photoshop. I have a vector shape of an apple in Illustrator. It is 2 piece- the body and the stem. I would like to fill this shape with a part of a photograph.
I'm wondering if I should do this in Illustrator or should move it over to Photoshop as a selection and then do it there? I'm also going to bevel the edges of the shape.
The next question is how to do it, which tool should I be using in either program? Is this considered a "fill" operation or am I cutting this shape out of the photo?
I'd like to select a section of an image and then fill it with a texture from another image. For instance, I could add bark texture from a tree to a section of a face. I'm not sure how to select a texture from one image and apply it to another.
View 1 Replies View RelatedI created a pattern of concrete block coursing that I want to apply to a picture of the side of a building. The pattern is clipped so that it will repeat appropriately when filled into a large area. The problem is that depending on where I fill in the canvas, the pattern never fills in with the same start point. I want it to always start at the bottom left corner of the pattern (which is the bottom left corner of a block). Is there a way to set the point that a pattern moves out from? Also, does the pattern radiate from its center point or one of the corners?
In Autocad there is a snapbase command that lets you choose the start point for a pattern. This is exactly what I'm looking for in photoshop.
I have defined the picture of a brick wall as pattern. I want to fill an area with that but:
1) The area is smaller
2)I want it 2x2
(I had put a demonstration but it doesn't work)
I am doing maps. Bodies of water need to be shaded, i.e., filled with a background. The current problem involves coast lines. I have two bodies of water to "shade" -- Pacific Ocean off California and the northern part of the Gulf of Mexico.
I enclosed the Pacific Ocean segment by using straight lines at right angles to intersect the coastline. Use the Paint bucket and no problem. When I go to the same, i.e., enclose the northern part of the Gulf of California by using a straight line across the the gulf enclosing it Illustrator gives grief. Sometime one error message, sometime another, sometimes nothing. I am told to select the paths enclosing the space I want to "Live Paint". I do it, but no joy.
Where is the filling tools in cs6?
View 2 Replies View RelatedI am working in Photoshop CS4...have been for years. All of a sudden, when I try to fill a closed path with a color, it fills the entire art board with color, except not inside the path. I have not selected "inverse" or anything....and it has never done this before....I can't figure out why it has started doing this, and I can't get it to stop. Most of the paths in my file, I have made in Illustrator and then pasted into Photoshop...they work normally....it is just the ones I actually draw in Photoshop that are doing this....one thing I have noticed is that in the paths palette, the paths I pasted in from Illustrator have a grey background.....while the paths I actually drew in Photoshop have a white background.
View 4 Replies View RelatedI've used Photoshop CS4 for sometime but I'm no expert!A club I'm in has asked me to fill in pre-printed membership certificates with members names etc. The only way I can think of for doing this would be to scan the certificate and call it layer
1. Then fill in the new details and call it layer 2.I then remove layer 1 and layer 2 is in the correct position for inserting the certificate into the printer and printing on it.Of course this is just my theory, how to even try it!
every time that I want to expend my picture resolution I using the crop tool and make the photo bigger but PS filling the new area with transparency instead of white. How can I set it to be white by default ?
View 2 Replies View Relatedhow can fill in colors to letters like O etc .
I have written something in text form in a simple font.
now I just need to fill some colors to the spaces inside the letter O how can that be done.
I'm after a little info on an issue that I currently have with Photoshop. I want to make a logo that's filled with images but maintains an overall shape,for example, a outline of Australia that's filled with approx 15 images all combined but does not go outside of the overall Australian shape, would also like the outer images to bend and follow the outline without it looking"boxy".
View 4 Replies View Relatedthis is not a hard one, but it is hard for me to figure out. i would like to find out how to fill a shape with some patterns exactly like how it looks in the below picture. As you can see, the filled pattern pictures(those small hearts) are not overlayed and the sizes are random. And the edge of the shape(that's the big heart) is just smooth. how to do it?
View 8 Replies View RelatedI'm occasionally using CD X4 just for fun (so i'm not that experienced). My friend who has a digital printer, once printed one of my designs but there were stripes (like you have when there's little ink in a printer) only in gradient filled areas When i fill a shape with gradient colors, i also see these stripes on my screen (when i look very close) in CD and also in pdf when i export the file. What can i do?
View 7 Replies View RelatedI'd like to ask if it is possible to change colour of outline according to filling. I've traced the raster picture (outline tracing) and there is no outline and the picture seems to be disturbed by tiny white lines. So I'd add hair outline and I'd like to have the same colour of the outline as is the object. Is there any function what is able change it at once and all at the same time?
View 6 Replies View RelatedHow do you give an arrow a colour of if it is big enough fill it with a colour.
View 6 Replies View Related