AutoCAD Map 3D :: Image Coordinate Systems Transformation And Rotation?
Apr 1, 2010
I have some UTM images that I need to convert to State Plane. If I import them into map with raster design and export them to the state plane coordinate system, they work just fine, but I can't figure out a way to get rid of the black wedge that it makes along the edges of images.
If I query them in using map I can transform the coordinate system, but then every time I open the drawing it takes like 5 minutes just to open.
What has everyone else done to use multiple images in a drawing and transform or convert the coordinate system of the images?
View 3 Replies
ADVERTISEMENT
Jul 19, 2012
I am using Civil 3D 2012 with SP1. When I use data connect and attempt to edit the coordinate system the Coordinate System Library that pops up only shows 5 No Datum coordinate systems. The Datum box under Show is uncheck, unfortunately it is also greyed out and uncheckable. How do I get this box checked?
View 3 Replies
View Related
Mar 9, 2012
Installation of Autocad Map 2012 provides a list of thousands of coordinate systems, datums, geodetic transformations, etc.. but I see that the system doesn't allows editing (they are read-only) and always I have to create new systems, new datums ..Is there any way to make it editable?
View 3 Replies
View Related
Jul 14, 2012
I'm finding myself on more and more sites that use multiple coordinate systems and height datums.
We have 3 on this job. One is the MGA zone 50 GDA94, another is just an offset of this and the third is a strange local grid with offsets and rotations.
We have Excel spreadsheets that can convert between the systems, but that requires several extra steps per point.
Is it possible to define each coordinate system in one drawing so that I could select which system I wanted to use, input the points and then select the main coordinate system so it converts the coordinates directly? It would mean less steps and I would have greater confidence in this system.
We have the parameters for all systems.
View 3 Replies
View Related
Jul 17, 2012
I'm enlisted in the United States Air Force and am working with the Navy for topo surveys. I'm bringing my information into AutoCAD Map 3D 2010 and using the coordinate system UTM84-4N. I can't figure out why when I bring in my survey .dwg, all of the points are in the middle of the ocean.
I've tried to manually project the coordinate systems onto each file and reference them. I've changed units to meters. I've copied with base point 0,0 and pasted as the same. I've even opened a fresh file, gave that a projection, imported the drawing from "Map Explorer" and queried "ALL" and redrew the file and still nothing. I've checked the Geo-Markers and they're obviously off. Is there a way to match them and have it scaled properly?
View 4 Replies
View Related
Nov 6, 2012
If I set up my Civil 3D drawing in some known coordinate system, e.g. State Plane, in the "drawing settings", can I then toggle my drawing into other known systems, e.g. UTM, by changing the coordinate system under "drawing settings"?
If not, how are the coordinate settings used?
View 1 Replies
View Related
Aug 1, 2012
I have a problem with different coordinate systems. I have a drawing in old Finnish coordinate system (KKJ, kaista 4) and I have a point file, which is made in ETRS-GK29 coordinate system. When I try to transfer the points to the drawing, the points will land way off from the drawing or I get this error message "Coordinate transformation from ETRF89.FinlandGK-29 to FINL-KKJ4 failed for point located at {29511662.554000,6948599.365000}. This usually indicates the point falls outside the boundaries of the destination coordinate system". I have checked and the point {29511662.554000,6948599.365000} should be over the drawing.
View 3 Replies
View Related
Jul 9, 2012
My Civil 3D 2012 coordinate systems normally displayed on the units and zone tab of the drawing settings have disappeared. On existing drawings the coordinate system code is still displayed. On new drawings the code appears as a symbol - a period or a comma or something. I can enter the coordinate system code and the program recognizes it.
My Civil 3D 2011 coordinate systems display as expected.
WP7,SP1, 64-bit, Civil 3D 2012
View 5 Replies
View Related
Jul 23, 2012
Is there a way to change a drawing in AutoCad 2012 or 2013 from Michigan Georef to State Plane? Any converter calculator, an add on,etc?
View 2 Replies
View Related
Jan 30, 2012
Is there a way to set Inventor so that the sketch origin defaults to the part origin? I find it very frustrating that it always defaults to some random corner of the part's body. It can screw up a part if you decide later on to modify the part such that you eliminate the point to which a coordinate system was defined. Also, when copying and pasting a sketch to new work planes it can be a pain to figure out which point is the origin of the orignal sketch if the pasted sketch is misaligned.
I know you can edit the coordinate system after a sketch is created, but I'd prefer not to have to rememember to do that with every sketch.
This was brought up about 6 years ago and there was no formal resolution
[URL]
In the second-to-last post John-IV8SP1mentions an option under 'Application Options' for an older version of AI, but I cannot find it in the 2012 applicaton options.
View 9 Replies
View Related
May 17, 2011
A - Autodesk will fix them in a timely fashion during this release - Not holding my breath here
B - Others won't spend hours trying to figure it out.
In my case, I need to create multiple unique coordinate systems called Low Distortion Projections (Google it for explanation.)
Here are the problems identified so far with the 2012 version of the Coordinate Library
Coordinate System Categories
1 - The regional 'containers' that hold coordinate systems definitions. You cannot create an empty container. It requires at least 1 coordinate system definition to be created. When creating a container put an arbitrary coordinate system definition in. This assists with item 2b.
Coordinate System Definitions
2a - Getting started - There is no provision to just select an existing datum or ellipsoid. One must 'create' a new definition that may vary in name only. The vast majority of us using their products will not actually create new ellipsoids or datums just utilizing them as the basis for other projections.
2b - Creating definition - Continuing the definition process the definition needs to be placed in a coordinate system category. Due to the problems identified in item 1 this creates a circular error. The workaround being item 1 rather than creating multiple definitions in the wrong container then going back to fix them.
2c - Scale Reduction - This should be renamed to Scale Factor to fit with the rest of the known world as the value can be greater or less than unity (1.000000) In my case the values all happen to be something greater than 1. While on this subject, the autodesk programmers set this to do something totally unexpected. No matter what you set the value to, if you save and reedit the projection value will be displayed as '1'
2d - Missing Projection definition form data - I went through the projection definitions and found the following projection types were missing their fields in the form:
Oblique Mercator
Ordanance Survey National Grid Transformation 1997
Ordanance Survey National Grid Transformation OSTN02
View 8 Replies
View Related
Jan 8, 2012
Got a new Windows 764 bit computer. Installed 2012. Using the Map Wspace to attach jpegs. I connect to the image and go to edit the coordinate system. On the new computer, I only have a half dozen coordinate systems, none of which are PAN83.
I go to my old XP pro 32 bit computer and the whole list of coordinate systems comes up.
View 9 Replies
View Related
Aug 30, 2012
I can not change coordinate systems of Surface models and COGO points. Why?
View 4 Replies
View Related
Nov 3, 2012
I want to know why I can't change coordinate of points while importing points from Points menu?
I created new file, assigned any coordinate system to the model. Opened Import points windows there, created new file format which there I assigned Coordinate zone transform to the coordinate system of the text file and imported my text file. But the coordinates of points didn't changed or transformed. When I do it by Survey in Toolspace its works good. I want to know whether I did any wrong or it is problem of software.
I use AutoCADCivil 2013 64 bit in Windows 7 64 bit!
View 2 Replies
View Related
Nov 20, 2012
My group is trying to convert a dwg from one coordinate system to another. The original drawing contains points, blocks, etc. in 1 system and we need it in a different one. We tried attaching the dwg to a new map with the new system using a layer query, but this did not appear to bring in the objects into the new system.
"Structures" is in the original system (OR83-NF), "StructuresHarn" is in the desired system (ORHP-NIF)
P.S. C3D 2011
Civil 3D 2013, HF3.0
Windows 7, 64-bit, SP1
View 2 Replies
View Related
Feb 21, 2012
I am using Civil 3D and Map 3D 2010.
I have some points in a drawing set up in a coordinate system and using a specified point file format, I successfully exported them to another coordinate system for use by our surveyors. I also wanted the pipe route in my destination drawing so I created a shp file from a polyline representing the pipe route in the original drawing using Map 3D Export. When I imported the shp file into my destination drawing there appears to be a slight horizontal difference from the point locations. The shp file doesn't land directly on the points.
To try another comparison, I ran a query on the pipe route to perform a manual coordinate system transformation. The result of this is the exact same as the shp file.
My questions are, which method (exporting points vs. shp files) results in the correct coordinate transformation and why are they different? When exporting points I am not using any specific transformation settings, I am simply selecting the destination coordinate system. When exporting a shp file, Map 3D creates a prj file from the specified coordinate system in the drawing. Are there any other settings I need to adjust to get the same result with both processes? The only thing I can think of is I only have the coordinates out to 4 decimal places in my point file format, do I need to go out farther?
View 9 Replies
View Related
Jul 9, 2013
I have a created a TIN surface with a DEM file. Drawing coordinates are State Plane NAD 83 feet. DEM file coordinates are UTM NAD27 meters. Surface is shifted approx. 835 miles east.
View 7 Replies
View Related
Feb 19, 2013
If you have a dwg that is, say, done in west zone but some agencies want you to provide a table of west and east zone coordinates is there a transform function that will do this in a label?
I would still wan everything in the dwg to be in west zone but be able to display coordinate values in other zones.
View 4 Replies
View Related
Mar 22, 2011
I have acsii data that I need to add to a map. My coordinate system for the map is CANA83-3TM114
The coordinate system for the ascii points are unknown. How do I transform the data to the same coordinate system as my map?
View 3 Replies
View Related
Mar 3, 2013
when I import PNEZD format .csv using import wizard the coordinates get transformed. all points are shifted about 20' in northing and 5 feet in easting. I have to use the import wizard w/ survey database in order to process linework codes.
View 5 Replies
View Related
Mar 14, 2012
how do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies
View Related
Feb 19, 2012
I have an image and I would like to animate it's transformation into a skewed and distorted shape, e.g.: I'd like to show the steps of a rectange being distorted into a non-isosceles trapezoid. Is this possible?
View 16 Replies
View Related
Sep 17, 2013
Nearmap has provided an aerial image georeferenced in the same coord system as Google Earth (epsg:3785). I found a Map 3D coordinate system WGS84.PseudoMercator (epsg:3857) which on web forums is equivalent to epsg:3785. After loading the image into a dwg on the epsg:3857 coord system I then queried the image into a dwg file on an mga55 gda94 coord datum.
It rotated the image correctly but as we had survey located features in the drawing the image needed to be shifted a further 1.75 metres SW than the transformation that Map had performed.
My question is to confirm that the Map epsg:3857 is indeed the same as epsg:3785? Given I had to shift the image I suspect it isn't.
Nearmap have also suggested using an epsg:900913 coord datum but there isn't one in Map 3D.
View 2 Replies
View Related
Nov 10, 2013
i'm working in AutoCAD 2006 , so the project is that, i have a pdf with contours of an area, i have to rasterize it as a jpg picture, pass it to AutoCAD (i have done this so far..) and then i have to find the X , Y and Z coordinates of some points in the picture. Well with the "ID" command, i found the X and Y coordinates but as Z it gives me 0,0000.. How can i pick a point in the jpg and find the Z? I have to find the altitude!
View 4 Replies
View Related
Jul 27, 2012
I am making a template file having title block with fields. I use this template for creating layouts and sheets using Sheet Set Manager and the fields will be updated from the data of SSM. Now i would like to add a dynamic north block to my template. The block could be rotated (i have this block in file itself) and rotation angle could be inserted. Now how can i add a custom field to SSM so that i could set a rotation angle for the project and thus every new layout or sheet created using the template has the north block rotated with the angle mentioned in SSM.
Here is the file...........
View 9 Replies
View Related
Jun 13, 2013
I have a utm .tif and .tfw files which I need to convert into a wgs84 ascii file (csv ideally) with the full list of x,y and z values. The UTM needs to become geocodes and it needs to be in ascii. I am using Civil 3D 2012.
View 9 Replies
View Related
Sep 21, 2011
I want to rotate a drawing in my paper space, but without rotating it in model space. So that I still can work on it easily in model space.
View 9 Replies
View Related
Sep 5, 2013
Any example code of creating material from image file including the setting of parameters like seen in the materials dialog. I need to set the rotation angle along with the U/V tile and U/V offsets at the same time. This example shows part but does not do rotation.
[URL].....
I am trying to make the image fit a rotated face that is usually of the same proportions as the image.
View 1 Replies
View Related
May 15, 2007
I have a North Arrow that I would love to make into a dynamic block. I would like to be able to rotate the N that represents where the north direction is. But while rotating the N around the center of a circle I would like the letter itself to stay un-rotated. It seems simple, if I rotate the letter around the axis of a circle 90 deg, I would like the letter itself to rotate -90 deg on it's own axis. Of course this is easy to do manualy, but how do i do it so that rotation 1 automaticaly triggers rotation 2?
View 9 Replies
View Related
Aug 1, 2004
Everytime I I try to totate the canvas arbitrarily the qualtiy goes way down, but if I rotate it 90 or 180 degrees it doesn't change. Most of my images need to be rotated 45 degrees. Is there any way to keep the image quality from going down or a way to fix it?
View 1 Replies
View Related
Jul 10, 2009
I have a photo which I needed to rotote counterclockwise 2 degrees. The problem is that the canvas did not rotate with the photo making it difficult to crop the photo because some canvas remains.
View 1 Replies
View Related
