I am using Civil 3D 2012 with SP1. When I use data connect and attempt to edit the coordinate system the Coordinate System Library that pops up only shows 5 No Datum coordinate systems. The Datum box under Show is uncheck, unfortunately it is also greyed out and uncheckable. How do I get this box checked?
View 3 RepliesInstallation of Autocad Map 2012 provides a list of thousands of coordinate systems, datums, geodetic transformations, etc.. but I see that the system doesn't allows editing (they are read-only) and always I have to create new systems, new datums ..Is there any way to make it editable?
View 3 Replies View RelatedI'm finding myself on more and more sites that use multiple coordinate systems and height datums.
We have 3 on this job. One is the MGA zone 50 GDA94, another is just an offset of this and the third is a strange local grid with offsets and rotations.
We have Excel spreadsheets that can convert between the systems, but that requires several extra steps per point.
Is it possible to define each coordinate system in one drawing so that I could select which system I wanted to use, input the points and then select the main coordinate system so it converts the coordinates directly? It would mean less steps and I would have greater confidence in this system.
We have the parameters for all systems.
I'm enlisted in the United States Air Force and am working with the Navy for topo surveys. I'm bringing my information into AutoCAD Map 3D 2010 and using the coordinate system UTM84-4N. I can't figure out why when I bring in my survey .dwg, all of the points are in the middle of the ocean.
I've tried to manually project the coordinate systems onto each file and reference them. I've changed units to meters. I've copied with base point 0,0 and pasted as the same. I've even opened a fresh file, gave that a projection, imported the drawing from "Map Explorer" and queried "ALL" and redrew the file and still nothing. I've checked the Geo-Markers and they're obviously off. Is there a way to match them and have it scaled properly?
If I set up my Civil 3D drawing in some known coordinate system, e.g. State Plane, in the "drawing settings", can I then toggle my drawing into other known systems, e.g. UTM, by changing the coordinate system under "drawing settings"?
If not, how are the coordinate settings used?
I have a problem with different coordinate systems. I have a drawing in old Finnish coordinate system (KKJ, kaista 4) and I have a point file, which is made in ETRS-GK29 coordinate system. When I try to transfer the points to the drawing, the points will land way off from the drawing or I get this error message "Coordinate transformation from ETRF89.FinlandGK-29 to FINL-KKJ4 failed for point located at {29511662.554000,6948599.365000}. This usually indicates the point falls outside the boundaries of the destination coordinate system". I have checked and the point {29511662.554000,6948599.365000} should be over the drawing.
View 3 Replies View RelatedMy Civil 3D 2012 coordinate systems normally displayed on the units and zone tab of the drawing settings have disappeared. On existing drawings the coordinate system code is still displayed. On new drawings the code appears as a symbol - a period or a comma or something. I can enter the coordinate system code and the program recognizes it.
My Civil 3D 2011 coordinate systems display as expected.
WP7,SP1, 64-bit, Civil 3D 2012
Is there a way to change a drawing in AutoCad 2012 or 2013 from Michigan Georef to State Plane? Any converter calculator, an add on,etc?
View 2 Replies View RelatedIs there a way to set Inventor so that the sketch origin defaults to the part origin? I find it very frustrating that it always defaults to some random corner of the part's body. It can screw up a part if you decide later on to modify the part such that you eliminate the point to which a coordinate system was defined. Also, when copying and pasting a sketch to new work planes it can be a pain to figure out which point is the origin of the orignal sketch if the pasted sketch is misaligned.
I know you can edit the coordinate system after a sketch is created, but I'd prefer not to have to rememember to do that with every sketch.
This was brought up about 6 years ago and there was no formal resolution
[URL]
In the second-to-last post John-IV8SP1mentions an option under 'Application Options' for an older version of AI, but I cannot find it in the 2012 applicaton options.
I have some UTM images that I need to convert to State Plane. If I import them into map with raster design and export them to the state plane coordinate system, they work just fine, but I can't figure out a way to get rid of the black wedge that it makes along the edges of images.
If I query them in using map I can transform the coordinate system, but then every time I open the drawing it takes like 5 minutes just to open.
What has everyone else done to use multiple images in a drawing and transform or convert the coordinate system of the images?
A - Autodesk will fix them in a timely fashion during this release - Not holding my breath here
B - Others won't spend hours trying to figure it out.
In my case, I need to create multiple unique coordinate systems called Low Distortion Projections (Google it for explanation.)
Here are the problems identified so far with the 2012 version of the Coordinate Library
Coordinate System Categories
1 - The regional 'containers' that hold coordinate systems definitions. You cannot create an empty container. It requires at least 1 coordinate system definition to be created. When creating a container put an arbitrary coordinate system definition in. This assists with item 2b.
Coordinate System Definitions
2a - Getting started - There is no provision to just select an existing datum or ellipsoid. One must 'create' a new definition that may vary in name only. The vast majority of us using their products will not actually create new ellipsoids or datums just utilizing them as the basis for other projections.
2b - Creating definition - Continuing the definition process the definition needs to be placed in a coordinate system category. Due to the problems identified in item 1 this creates a circular error. The workaround being item 1 rather than creating multiple definitions in the wrong container then going back to fix them.
2c - Scale Reduction - This should be renamed to Scale Factor to fit with the rest of the known world as the value can be greater or less than unity (1.000000) In my case the values all happen to be something greater than 1. While on this subject, the autodesk programmers set this to do something totally unexpected. No matter what you set the value to, if you save and reedit the projection value will be displayed as '1'
2d - Missing Projection definition form data - I went through the projection definitions and found the following projection types were missing their fields in the form:
Oblique Mercator
Ordanance Survey National Grid Transformation 1997
Ordanance Survey National Grid Transformation OSTN02
Got a new Windows 764 bit computer. Installed 2012. Using the Map Wspace to attach jpegs. I connect to the image and go to edit the coordinate system. On the new computer, I only have a half dozen coordinate systems, none of which are PAN83.
I go to my old XP pro 32 bit computer and the whole list of coordinate systems comes up.
I can not change coordinate systems of Surface models and COGO points. Why?
View 4 Replies View RelatedI want to know why I can't change coordinate of points while importing points from Points menu?
I created new file, assigned any coordinate system to the model. Opened Import points windows there, created new file format which there I assigned Coordinate zone transform to the coordinate system of the text file and imported my text file. But the coordinates of points didn't changed or transformed. When I do it by Survey in Toolspace its works good. I want to know whether I did any wrong or it is problem of software.
I use AutoCADCivil 2013 64 bit in Windows 7 64 bit!
I'm trying to utilize the piping and routed systems tool to run some pipe, but when I setup my pipe styles, it cannot find the xml files for the pipe, fittings, etc. I know I am connected to my content server as I can insert individual fittings and manually place pipe lengths. I am running Inventor Professional 2009
View 6 Replies View RelatedIn AutoCAD Civil 3D 2012 when assigning the state plane coordinate system LA83-SF is missing from the Library. Although it is visible as a choice to select in the Available coordinate systems window when creating a Category.
View 8 Replies View RelatedI am using inventor 2012 but the material library is not loading.Then i go to the Manage> Styles Editor> and clieck on color or material it only gives me the option of defualt.
The drop down box in the top right is greyed out so i cannot change this either.
It works fine on another PC just not mine.I have downloaded the material pack from the website also.
I have also changed the hardware settings. I have tried all 3 hardware settings and it makes no differance.
Running windows 7 x64, 8 gigs of ram 3.4 quad core, 128gig SSD.
Everything is up to date.When i installed the material library download the material library was working, but when i opened a file the material library went back to how it was above.
The files i am using are from models i made in inventor 2010, but there is no problem on another PC i use.
I am using Revit 2013 and have built a material library for the company I work for. It has been working fine up until about an hour ago. Now when I try to open up the material library I created it says "No assets in this library". I can't figure out why there is nothing there. And I don't want to have to recreate all my materials I already created! I can still find the file in my folders and it says theres 3930 KB of information in the file. I included a picture of what my Assest Editor and Asset Browser show when I try to open my library.
View 2 Replies View RelatedAll my photos in my library are just showing gray.. here's a screenshot
View 1 Replies View RelatedI downloaded LR 4 and it opens but only the LR 4 superstructure (frames, info on left side) is visible. There are no phoyos from the catalogs listed on the left side.
View 1 Replies View RelatedThe thumbnails in Grid view and in thePanel at the bottom of the grid do not show badges. I can see which collections photos are in by right click and go to collection but his is a real pain if you want to see which collections a photo is in I have set view -options -gridview -Thumbnail badges positive I have set preferences -Interface - show badges positive
Is this another glitch in LR5 on the mac (Imac)? I bought LR5 2-3 weeks ago and had series of problems and find Adobe non Responsive
Our problem with Lightroom is this: After inporting images, they do not show in the library mode. The tree view shows first image of the folder, but the library preview does not open.- Probllem is persistant and any new images after 3 weeks are not showing up.- problem is resistant, we upgraded from 5.0 to 5.3, but problem is consistant.
System specs: Generic computer, 8gb memory, windows 7 ultimate 64bits.c: (SSD) houses lightroom, windows & catalogue files.d: houses inport with Picasa files.p: Container of accepted and to be edited image f
General process of images: Import with picasa of images, verification of image quality and rejecting failures.After all images are done, use of syncredibles program to copy new files not yet on the picasa library folder. This basicly checks and moves pictures that are currently on drive D: but are not yet on drive P. After new files are transferred, then picasa will re-import with add function on import from its own folders.
Directory structure: c:program files adobelightroom 5.3 (main proigram)c:uusi kansiolightroom caltalogued:kuvat (picasa image store)
p:kuvat (lightroom image store)
The divasion of d: and P: driwe is so that picasa will not see images that arte on Lightroom and vice versa.are on D: & P started to get "read obn
We have tried to study this problem, and first we notised that folders that houses images on both driwes, started to receve "read only" atrribute. Even tho we cleared this with user restrictions (folder security) the imported images still refuse to load the previews.Catalogue contains over 30 000 raw images.
We are starting to shoot blanks here. In short, the tree view shows first image of the folder, images are present in the system, but when you click the tree view to open up the folder, no images will refresh to center view of the screen. If pressed couple of times screen will go white, and crash LR.We have tried to "find missing files" and "folder synchronication.
I have things cataloged in folders by country then by year, then date. If I try to add a folder I am directed to my Lightroom folder and everything is in order, ie Lightroom/Asia/China/2008/ 2008-6-16. But I can't see that on the right side of LR.
View 1 Replies View RelatedThe keywording & Keyword List tabs are not showing up in my library module on the right hand side. Also, I can't seem to use the Mac 'Command + K' shortcut to add a keyword. Have tried on photos that are both from my iphone (TIFF) as well as raw from my Nikon (NEF).
View 2 Replies View Relatedhow do i get an image set in one coordinate system come into a drawing in another coordinate system?
View 3 Replies View RelatedIn an attempt to change the unit display on a CC item (from decimal inches to fractional), I came across what, to me, is an issue. In the CC I set the length on a pipe conduit part to a custom column, with the range at .001 - 240 inches. I modified my filename column so it was a string that included the length value at the end. (ie Spool x length).
If I place from CC, as custom, a piece of this conduit, the filename does exactly what I expected. If I specify 24 in the length box in the CC dialog, my filename comes in as "spool x 24"... (or to that effect, I'm paraphrasing). If I do the same thing within the context of a pipe run in that same assembly... the filename, even though I chose place from CC, as custom, and specified a length, comes in as "spool x .001". Every time. And also, any spool pieces generated as a result of populating a route. I expect the filename there to be different as tube & pipe has it's own rules for naming spools... but the description field still generates as "spool x .001".
So, it would appear that the column parameters set in the CC, do not apply at all in Routed Systems? I may have to put this in the idea station... wish I had found it last year, now I'll have to wait another year for apotential fix.
how can i use/activate routed systems in inventor pro 2014 or is this option disabled on the student version?
View 5 Replies View RelatedI want to know how to transform OCS Coordinate of A block object to UCS or WCS Coordinate .
It's Block's OCS Coordinate not other objects.
few of our systems are not loading the xrefs automatically. it show as UNRESOLVED until reload it manually. also this systems are not able to attach / overlay xrefs as relative path.
View 7 Replies View RelatedI'm trying to create a few sets of planetary gears and I'm running up against a wall here.
Both sets, for simplicity, need 1:4 ratios which makes the planet and sun gears the same size. I was using 20 teeth for the planets/sun and 60 teeth for the ring which based on my understanding of the ratios, should work. My problem arises when I attempt to get all of these gears(sun, four planets, and the ring) to mesh and rotate.
I can't figure out how to make sets of more than two gears using the Spur Gear tool. When I make the other gears on their own and add them to the system, they don't inherently mesh and pass through each other. Obviously I'm missing something here because I clearly need more than a two gear system.
As a side question, is there a method(Derived Parts, maybe?) through which I can add to a gear made with the Spur Gear tool to create a new part that will still function as a proper gear?
We are on 2014 professional and have been using routed systems for over a year now. One of our guys ran two routes over the course of a couple weeks with no problem. He went to create a new route yesterday and all of the styles are gone (both default and custom). If he goes into the two previously created the style that is used is there, but any other styles are not. What could have changed? I tried deleting the job project and creating it again to verify all the paths. Seems like everyone else's machines are running routed systems fine so I don't think it's a network issue.
View 2 Replies View Related