I do not have a plotter. The largest paper I can print on is 11x17.I am needing to create a drawing which can be plotted on A1 size paper.
How can I get this A1 size to show up in Paper Space so I can use viewports to set up the layout?
We are useing Autocad LT 2011 and 2013.
since a few weeks we have trouble plotting drawings with a oversized paper size and transparency on.
This problem is solved in 2013 LT after installing SP2. (see release notes: Drawings cannot be plotted with the oversized paper size and transparency on.)
Anyway in 2011LT the problem is still there. Also after installing update 1 & 2.
Using ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
How do you get an xref to appear faded when plotted onto paper?
I tried putting the xref's on their own layer and adjusted the transparency level.
I have a requirement sheet from the city for plans for a little strip mall that I'm drawing a renovation for one unit. Had to reproduce the entire site however for the city planner. No problem, doing that, but here's where it gets kinky. They want the plans submitted on 11 x 17, but scaled at 1"=10'. The site is 656' ±, so at that scale, ain't no way it's gonna fit on an 11 x 17 sheet, right? If one inch = ten feet, on a 17" page, the biggest anything could possibly be is 170 feet, right?
View 8 Replies View RelatedHow can i print my drawing (1400 * 250)m on several A4 paper size,I'm using C3d 2012.
View 3 Replies View Relatedhow i can insert a new paper size or edit a paper size in plotting
View 2 Replies View Relateda)) I have a simple drawing attached with color outlines.How do i fill in the shapes with color.The blue outline filled in Blue and the red outline filled in Red
b)) How do i set the drawing space so as it fits to a A4 size paper?
I'm using mm, and i want to create a custom scale which is not in the list of my standard scale in the viewport properties. If i want 1/200 for example and this is not in the list how do i set the custom scale?
View 4 Replies View RelatedI am having problems printing to drawing sizes other then A Size (Letter).
I have scanned through the messages in this Newsgroup and tried everything that I have found, including making sure that I set the properties in a specific order.
No matter what size I specify, the printer spits out the drawing on an A Size piece of paper.
Here is my
Private objApprenticeServerApp As New ApprenticeServerComponent
Private Sub PlotInventorDrawing(strDwgPath As String, strPlotSize As
String, strPlotter As String)
' Open a document.
Dim odoc As ApprenticeServerDocument
[Code] .......
just done a job for a client and when they get them printed they are not to scale (slightly smaller), i have checked my drawing and it is scaled correctly. i plot to a pdf and the client gets the pdf printed locally. when i print i print to extents and plot centred. i also sent a shopfit drawing from another company using the same method except their drawing was set to plot the layout, their drawing plotted correctly to scale so i am wondering now if plotting to extents is the cause of the problem?
View 8 Replies View RelatedIm trying to create a new paper size preset in PS CS6. I was told if I went to my PS folder, I will find a folder named presets. Inside that folder there should be a text document called "New Doc Sizes.txt" but it's not there. where I might find this text file in a presets folder?
I have a C drive, but my folder for CS6 is on my D drive. I use Windows Ultimate 7 x64.
How do i set up a template to print 1/4 flyers in illustrator?? i need 4 designs on one 8.5 x 11 size paper??
View 3 Replies View RelatedUsing 2011 with a PDF underlay. When the drawing is plotted as a PDF and the new PDF is opened, parts of the PDF portion of thew drawing are green. Changing the transparency, contrast, fade etc. of the underlay hasn't worked. I don't want to save the PDF underlay as an earlier PDF version because I'm snapping to parts of the underlay.
View 7 Replies View RelatedI am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedQ I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedI have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies View RelatedI have a prob with the Paper size and the Cell Size not matchng in LR4 using a Sony UP-DR150 printer.
I'm running on Windows home premium 64bit,
i have installed the Sony 64 bit printer driver.
When i print the photo, it prints to the size 4.31 x 3.12 on the 5x7 paper.
I am making an independent film. And I've decided to use Photoshop to make the Poster...but theres one problem. We'll...3 actually. Hopefully someone could help me out and I would greatly appreciate it. Even if you can only answer one, I will still greatly appreciate it.
1. What would be the coordinates if you want to make a Poster?
2. How about a full paper. What size does the Photoshop picture got to be to fit a piece of paper perfectly?
3. How about DVD covers? Either just the front or the front and the back.
I have the next problem with PDF printer:
I have configured a special size and assigned to a PC3 file
(1350.00 x 1050.00 mm.)
This is the default printer for some other layouts in some other DWG's as well.
If I print the layout directly from the drawing editor, it creates a PDF with the paper size I assigned, but if I print it using the sheetset, it creates a document with another paper size based on I don't know what.
The plot and publish details window shows the next message when printed from the sheetset
Sheet: BA_00-P-050-0100___ - Plotted
Page setup:
Device name: DWG To PDF.pc3 - plotted to file
Plot file path: ...DesktoppublishBA_00-P-050-0100___.pdf
Paper size: ISO full bleed B0 (1414.00 x 1000.00 MM)
I cannot find the mistake.
How do you change your paper size? I'm not given the option in the drop down box:
Page Setup - 0.jpg
I have too many paper sizes in PageSetup. This makes choosing the proper page size too lengthy and time consuming.
I only use two paper sizes namely A4 and A3 so I don't need to have English paper size like 11x14 in, Hagaki, Index Card and 30 other pagesetup.
How can I delete or get rid of unnecessary paper sizes?
I installed a new printer Officejet 7500A recently. Strangely that the A3 paper size appears in the Plot dialogue box is 425x302mm. Tried many hours to re-configure the Properties with no success.
View 9 Replies View RelatedI've just set up a PS plotter as per this link: URL....
Hatches in AutoCAD are being displayed really poorly (see attachment)... Basically they've been simplified to polygons instead of complex regions.
And secondly, my plot is cropped to paper size. The work we're doing is significantly larger then typical paper sizes, I realize I could add a new extremely large paper size, but is there a way to ignore the paper size?
I need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies View RelatedIs there an error in DWG to PDF? When I make a custom paper size A4 with size 210x297 and 0 margins, the pdf comes out wrong, see attached pdf.
I'm plotting extends, center the plot and fit to paper in modelspace. Preview displays correct. This was not an issue in ADT 2007.
I want to add a new layout to drawing with paper size "A3". this is want i am trying with. We had a VBA script before as shown bellow.
For Each tlAcadLayout In ThisDrawing.layouts If tlAcadLayout.Name = "A3" Then blnLayout = True tlCurMedia = tlAcadLayout.CanonicalMediaName tlConfig = tlAcadLayout.ConfigName oldOrg = tlAcadLayout.PlotOrigin Exit For End If Next With tlAcadLayout .RefreshPlotDeviceInfo .ConfigName = "None"
[Code].....
When working with other drawings I've got into the habit of dropping in my layout using the design centre rather than copying the whole drawing into my template setup. Most of the time this works fine but every now and then my layout will be massively oversized with borders, tables and veiwports all over the place.
My viewport is about 20 times the size of the paper! The paper size is fine and insertion units are set to 0 and I still can't find a solution. The attached image shows roughly the problem I'm getting. I'm using 2010 LT by the way.
I'm trying to plot in pdf many dwg file.
The files have a fixed height but variable in length.
The length of the file I'll take the "scroll".
So i want to create a paper size with a specific dimension.
psv.SetPlotConfigurationName(ps, "DWG To PDF.pc3", "Name of the paper");
How can I do?
Why the paper size won't set to A1.
See attached clip and picture of the printer default setting.
how to setup the paper size in paperspace, I want my template to match the papersize in paperspace. ie I have a metric template and want it to be setup so when I do a preview it looks right?
View 7 Replies View Related