After almost 10 good use, I get an error message when starting ACLT, A breakpoing has bee reached. (0x80000003)occured in the application at 0x7c839ac5. The computer then locks up. The only recovery that I have found to work, is to reboot. I tried using the installation CD to A.Repair, B. Reinstall, C Uninstall followed by Install. None works
View 2 RepliesI used to be a decent 3D modeler back in the day when 3D Studio was around. Now I am trying to get into the modding world and was suggested to get 3D Studio Max 2012.
I turned off all my apps, Aero effect, disabled all anti virus and any other non system applications before installing. Additionally I installed the SP2 and Product Update 8. regardless of what I try, if my Graphic mode is set to Nitrous, I get following error:
Exception: Breakpoint has been reached and I get a CTD(Crash to Desktop) followed by the general windows that pops up from Autodesk to send an error report. If I use Direct 3D, I get a similar message and CTD. Open GL works, but looks terrible and the view ports don't refresh right etc, making it unworkable
This is my system specs:
i5 3570k CPU
Sapphire HD Radeon 7850 OC w 2GB of VRAM
(driver Catalyst 12.6 latest driver)
8 GB DDR3 Ram
AsRock z77 Extreme 4 MB
Mushkin 120GB SSD HD (where 3D Max 2012 is installed)
I have tried uninstalling, reinstalling, etc but no matter what I do, I get the same exception error and CTD
I have one computer right now with Adobe photoshop on it. It says I have reached my activation limit but one of them I uninstalled and the other computer I no longer have, it died. What do I do?
View 1 Replies View RelatedWhen I start up Adobe ImageReady, an error message pops up while it's loading that says:
"Could not fully start the application because a program error has occurred."
How do I fix this? It used to work fine.
I have Imagready 7.0.1 and have Windows XP Media Edition.
I keep getting an application has moved message when starting Photo Shop CS6I have attached a screen grab of the message here. what I need to do to keep it from happening each time I start up CS6?
My OS is OSX Mountain Lion 10.8.4I start up CS6 from my normal location which is the CS6 icon that resides in my dock.if I select the update button, it has no effect, the application still gives me the same message each time I start up.
I recently upgraded to a new machine . I downloaded ACLT 2012 and it runs like a champ.
Now i am cleaning up scads of AC files from my old computer that were transferred and dumped into Documents and Notepad and all sports of places by the tech guys who built my new machine.
Some are of hatches, some are of commands, some just will not open....but all are dated from 10 years or longer from old versions of AC.
NONE are from my new ACLT 2012
What would be the best way to delete?
I'm using the 30 day trial and when I run AutoCAD 2014 I get a FATAL ERROR: Unhandled Access Violation Reading 0x0008 Exception at ad314c65h message
View 1 Replies View RelatedAfter installing Creative Suite CS 3, I immediately encountered the following error when I tried to launch it:
Unable to Locate Component
This application failed to start because OPENGL32.dll was not found. Re-installing the application may fix this problem.
I installed it from my windows XP disk into the correct system32 directory and I am still having problems. I read that you must register the dll before it can work and I received an error message.
I've installed Corel Draw graphics suite x3. When i'm trying to run the application, it says "To start this application for the first time or to activate, log in using an administrator-level account. From then on, you can use any user account to start this application".
View 1 Replies View RelatedIn Elements 9 I now get an error message "Cannot use Clone Stamp due to program error".
View 1 Replies View Related have encountered an error message on opening Lightroom 4 using Windows 7 Pro 32 bit.
The message is saying - Error in reading preview cache.
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedI installed Photoshop Elements 12 a couple of weeks ago. When I run the Photo Editor, everything is fine. But when I try to run the Organizer, I get the Microsoft Visuall C++ Runtime Library dialog that specifies a Runtime Error! for Program: C:Program Files (x86)... with error code R6025 - pure virtual function call.
My PC is a 64bit Windows 7 Machine with SP1.
Having cleared cookies/cleared history in safari. Tried firefox, still does not work. Opening Photoshop after downloading from creative cloud still does not work.
Message reads "Error Starting Creative cloud" cookies dir: cannot make folder/ cookies: Permission denied. (error 13).
I get an error message starting , "The application was unable to start correctly (0xc000007b) Please click OK to close application" 32 bit Light room works correctly. 64 bitwas working a few days ago.
View 5 Replies View RelatedI'm using AutoCAD 2012 LT and have having problems inserting/updating/editing fields. This is the error that appears
"There are no registered modules to edit fields or demand loading is currently disabled". When I click OK the Field pop-up appears empty! (see attached)
The BEDIT command is also not working. It was all working up until a few days ago! I have downloaded the most recent Service Pack and it's still not working.
A user is having issues with plotting from AutoCAD LT, when trying attempting a normal plot to PDF the program crashes and he is forced to close it, also when changing the way he plots to plot to DWG PDF it starts to work correctly but brings up a fatal error message as below and attached:
FATAL ERROR: Unhandled Access Violation Writing 0x0014 Exception at 778e224dh
When i try to convert my .dwg to a pdf on my laptop (second computer) i get an error message that the drawing might be password protected. it happens on all my autocad drawings
View 3 Replies View RelatedEvery time I try and plot a drawing I get this error message:
' YOU CAN NOT USE MULTIPLE INSTANCES AT THE SAME TIME'. The program then freezes for a short while then returns a message saying plot canceled.
I am using Map 3D 2011. Although I did have a trial version of AutoCad 2012 I had no problems plotting on both versions up until recently I have made no changes to any printer configuration, plot files or styles. I removed 2012 after I started getting this message but still I am unable to plot.
i'm working with this dwg that has a block in it that says "cannot be exploded" every time i try to explode it. is there anyway i can still get this thing exploded?
View 2 Replies View RelatedI am using a feature line to create a grading for a residential house pad. The county grading ordinance calls for a 6' drainage terrace (bench) when slopes exceed 40' in vertical height. I know that for corridor grading you can specify a slope bench with a subassembly but that is not what I am doing here.
I'd like a solution where the grading remains dynamic because I know that benching will cause slopes to cross property lines. I also want to keep the dynamic nature to be able to make adjustments to balance the earthwork.
I'm trying to render a large drawing and I keep getting this error message:
"The Scene Cannot Be Rendered. The Scene Must Contain At Least One 3D Wireframe or Solid Model Object To Render"
Other, similar drawings do not get this error message and i cant figure out what is causing it.
I am getting an error message when I am trying to insert a schedule room tag. It does not matter which room tag out of the content browser I select, I get the same message. the message is as follow: "No symbol has been specified for the tag" All of the tags have worked up until today. Nothing has changed that I know of on our network and all of the paths seem to be pointing to the correct directories. We are currently using Architecture 2008. This problem is only coming up with these specific room tags.
View 3 Replies View RelatedWorking in Autocad Map 3D 2008.
I'm trying to export some blocks w/ object data to a shapefile. Error message is "Export did not succeed." ... very informative! I've also tried without attaching attributes, going to SDF, restarting the computer, repairing my installation. Nothing has worked. why Mapexport is broken now?
The configured Heidi Driver cannot be loaded. Switching to default software.
View 3 Replies View RelatedI worked on X'ref DWG. After editing the referenced file and reloading the X'ref, i get a message saying ' Unreconciled New Layers'.
What could be the reason for this and how to rectify this?
not sure why I'm having trouble using the blue "path" layers polyline path to loft the profiles and form the c-clamp.
View 2 Replies View RelatedI run Autodesk Land Desktop 2004 on Vista, it works, kind of.
I get this error message when I open the program: "Error writing the acamap.sys file"
When I say OK to the message, the program starts working.
At the end when i close the program i get this message: " Autocad application has stopped working"
The next message after this is: " Download updates for 2004"
Any way to avoid these annoying messages?
I'm getting lots of error messages when I bring up drawings in my 2009LT. Resource Manager Error. Cannot load resource only DLL. File not found, then many similar messages with AecResMgrenu.dLL.
Over and over, keep hitting OK till drawing loads. Not one specific file either.
Also: Unable to locate resource string. Resource Manager is not correctly installed.
Is there a way to fix without reloading 2009LT and having to reset all settings. Can that file AecResMgrenu be replaced. I have backup Program Files on CD.
Opening AutoCAD LT this morning no problem. Closed it down and then opened it up again about 10 to 15mins later and get this message (see attached pdf).
Windows XP.
I'm using AutoCAD 2013 and I get a fatal error when it pulls up a print preview. If I have "Publish in Backgound" selected it proceeds to print. The error only appears to exisit when it pulling up the print preview. I have installed sp 1.1. I've repaired and reinstalled also. My AutoCAD 2012 is publishing fine.
View 6 Replies View Related