AutoCAD LT :: Will Hatch On Hover But Not By Point
Jan 16, 2013
I'm very careful with my work to keep my lines on the same elevation and and I fillet and trim so that boundaries should be closed but AutoCAD always finds some problem with my work when I try to hatch an area by picking a point, often claiming boundary failures with those little red cirlces NO WHERE NEAR the area I was trying to hatch!
Even more infuriating is how it seems to have NO problem temporarily hatching the area while I hover before picking the point. If it can display what it might have looked like, hasn't it found the boundary? Or were these two features coded by people working in opposite ends of the building?
it has no trouble ghosting the area in hover.
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
View 9 Replies
ADVERTISEMENT
Jul 14, 2000
How can I use a single point selection to hatch an area by using vba in AutoCAD 2000?
I can hatch the area by selecting a polyline. what I would like to do is have the user select a single point and the area would be hatched?
View 2 Replies
View Related
Nov 29, 2012
Is it possible to include a point entity (rather than a zero-length line as in the standard SQDOTS pattern) in a custom hatch pattern?
If so what's the exact format of the line in the .pat file that defines the point?
View 9 Replies
View Related
Apr 29, 2013
Coming from MDT I'm having a hard time adjusting to some of the features that are missing in Inventor. One of which was a command that allowed me to hover over any part in MDT and it would show me the part name and if it was a structural steel item would show me the G_L or length. I cannot find this feature in Inventor and don't even know if this is available. This allowed me to open an assembly and quickly go through it and see what it's made of. Where to turn it on or get it?
View 9 Replies
View Related
Mar 3, 2010
when I hover the cursor over my own custom toolbar buttons, I get the message "Press F1 for more help" you can then go to F1 but that only for Autocad commands not my own programs. My question is how can I get rid of the message "Press F1 for more help" when the cursor is over my custom program buttons?
View 6 Replies
View Related
Apr 12, 2011
I'm wondering if there is a way to disable the menu that appears when you hover over polyline nodes/vertices in Autocad 2011.
I use mainly typed commands and am finding that when I select a polyline, I go to type a command and because my mouse is still on the polyline, half the time it ends up performing a completely different command because the menu has appeared in the meantime.
View 3 Replies
View Related
Jun 21, 2012
I'm editing blueprints for my summer job and I was wondering if there was a way to add a text field to the hover over menu of a region or polyline. I simply want to add the function of the room to the hover menu.
View 1 Replies
View Related
May 2, 2013
I am trying to entmake a hatch entity from a hatch template.
After entget the template hatch entity, i get the followings
Select object: ((-1 . <Entity name: 7ed11b78>) (0 . "HATCH") (330 . <Entity
name: 7efc7c10>) (5 . "737") (100 . "AcDbEntity") (67 . 0) (410 . "Model") (8 .
"SECTION-LABEL") (62 . 255) (100 . "AcDbHatch") (10 0.0 0.0 0.0) (210 0.0 0.0
1.0) (2 . "SOLID") (70 . 1) (71 . 0) (91 . 1) (92 . 1) (93 . 8) (72 . 1) (10
633596.0 5.79713e+006 0.0) (11 633519.0 5.79713e+006 0.0) (72 . 1) (10 633519.0
5.79713e+006 0.0) (11 633519.0 5.79708e+006 0.0) (72 . 1) (10 633519.0
5.79708e+006 0.0) (11 633500.0 5.79708e+006 0.0) (72 . 1) (10 633500.0
[code]....
Now I wrote the following code using the above data as follows
(entmake (list (cons 0 "HATCH") (cons 67 0) (cons 410 "Model") (cons 8 "SECTION-LABEL") (cons 62 255) (cons 10 (list 0.0 0.0 0.0)) (cons 210 (list 0.0 0.0 1.0)) (cons 2 "SOLID") (cons 70 1) (cons 71 0) (cons 91 1) (cons 92 1) (cons 93 8) (cons 72 1) (cons 10 pt1) (cons 11 pt2) (cons 72 1) (cons 10 pt2) (cons 11 pt3) (cons 72 1) (cons 10 pt3) (cons 11 pt4) (cons 72 1) (cons 10 pt4) (cons 11 pt5) (cons 72 1) (cons 10 pt5) (cons 11 pt6) (cons 72 1) (cons 10 pt6) (cons 11 pt7) (cons 72 1) (cons 10 pt7) (cons 11 pt8) (cons 72 1) (cons 10 pt8) (cons 11 pt1) (cons 97 0) (cons 75 0) (cons 76 1) (cons 98 1) (cons 10 (list 0.0 0.0 0.0)) (cons 450 0) (cons 451 0) (cons 460 0.0) (cons 461 0.0) (cons 452 1) (cons 462 1.0) (cons 453 2) (cons 463 0.0) (cons 63 5) (cons 421 255) (cons 463 1.0) (cons 63 7) (cons 470 "LINEAR")))
The point variables pt1, pt2....pt8 are all defined. But when I run the code the hatch is not being created? Why?
View 1 Replies
View Related
Aug 24, 2011
I have a hatch (ANSI31) enclosed by a closed polyline. Whenever I change the hatch from ANSI31 to GRAVEL some of the hatch shows up outside the boundary. The Polyline consists of both arcs and line segments, and the hatching errors are occurring within the radius of the arc segments. Changing it from Associative to Non Associative makes no change.
I am using AutoCAD 2011.
View 9 Replies
View Related
Aug 6, 2008
I am in need of a lisp routine which will automatically pick up all hatch and solid hatch patterns within a drawing and change the colour to colour 254.
View 9 Replies
View Related
Apr 17, 2010
It is no more possible open Hatch Edit dialog with double click on existing hatch. Now, this way opens only Properties
View 9 Replies
View Related
Jan 2, 2013
Just downloaded Autocad 2013 and am missing quite a few of the standard hatches (siding, soldier, board and batten, etc.) What should I do to get them back. When I open old drawings with these hatches in them, they load just fine...but I am unable to hatch any new areas with these hatches (because they are not listed in the hatch library)
View 9 Replies
View Related
Feb 22, 2013
I want to be able to add a Block Reference to a hatch. I'm adding the block reference to an ObjectIdCollection and the hatch is not taking it when using AddLoop().
So I thought maybe I needed to add the location of the polyline (curve-like) object that is member of the blockreference to the hatch, but I don't know how to get its ObjectId.
Hatch thisHatch = new Hatch();thisHatch.Layer = layerName;thisHatch.SetDatabaseDefaults();thisHatch.SetHatchPattern(patternType, patterName);thisHatch.Color = Color.FromColorIndex(ColorMethod.ByColor, colorIndex);thisHatch.Transparency = new Transparency((Byte)(255 * (100 - 60) / 100));tSpace.AppendEntity(thisHatch);transaction.AddNewlyCreatedDBObject(thisHatch, [code]........
Also, I'm trying to delete certain HatchLoop that is associated to a polyline but I don't know how to do it. I'm going through the loops in the hatch but I don't know what to do there. I wanna do this so I create a new and different hatch on top.
I think one could also copy all the loops except the one one wants to delete, but I'm not sure how to tell which one is the one I want to delete that is the one associated to a polyline or that is in certain region.
View 1 Replies
View Related
Dec 17, 2011
I have AUTOCAD LT 2012 - windows 7 - SP1
Neither the button for Hatching or the Draw Hatch menu do not activate the HATCH DIALOG BOX?
This means I cannot Hatch?
I have also added the Hotfix for the Ribbon and it made no difference.
View 6 Replies
View Related
May 6, 2013
I've migrated from 2005 to 2014 LT and wondered if they have added to the hatch commands. I've looked and haven't found anything. Is there a command that you can pick a hatch pattern already shown on the drawing and make that pattern the existing one to use? I sometimes have multiple hatch patterns and scales, and wanted a quick way to go from one to another without lisp help.
View 3 Replies
View Related
Jun 14, 2009
For some reason when I hover over all of the icons of the various tools, it does not give me a description of what they are. How can I turn this on/activate it?
View 7 Replies
View Related
Mar 9, 2011
I have a client who would like me to create a portfolio for him displayed in a manner similar to the one on this page:[URL]
I know how to create an animation where the visitor can click on the small image and a new frame appears with the large image on the right, but I cannot figure out how to have the small image change upon hover-over before the visitor clicks on it.
View 2 Replies
View Related
Jan 26, 2014
When the mouse is placed on the elements ,They appear to be highlighted.
Can we highlighted to disable.??
View 2 Replies
View Related
Feb 17, 2013
I have facing some problem in adding hover/active effect in css.
For examples - i have two text button - (home & about us)
i want to add functionality that, when i hover on button, it will show underline, when click it, it will active with different color
& when i click anther button active button should be deactive & clicked button should be active.
View 8 Replies
View Related
Jun 6, 2013
I have created 2 symbols "Level1" and "Level2" and I did hover on the button at "Level1" symbol then when I click on that button it goes to symbol "Level2", hover on the button works perfect on desktop browsers, but on iphone the hover is not working.
The code I use for transaction from symbol to another symbol is:
sym.createChildSymbol("Level2", "Stage");
and for the hover I use mouseover: "sym.play("BA");" action to play the label at symbol "Level1".
What I am trying to achieve is at click on the button on iphone to make the hover play first then it should go to another symbol.
View 3 Replies
View Related
Jan 5, 2013
I am trying to get an animation where the user hovers over one of 13 stars on string. What I am after is when they hover over one it looks like its been knocked and starts to swing for a shot amount of time.This should happen to them all. I have this code but it doesnt want to play!
Mouse Leave:
$(this.lookupSelector("star-1")).playReverse();
Mouse Enter:
$(this.lookupSelector("star-1")).play(0);
When you add more and more stars it just stops working.
View 1 Replies
View Related
Sep 23, 2012
Using CS5, when I have multiple images open, it open in tabs which I like. However, when I put my cursor over a tab, a bubble appears that says the exact same thin it does on the tab. However, with the bubble there I can't click on the tab beneath it to select it or to delete it.
This is actually a huge problem when I make camtasia videos where I want to switch between tabs during a voice recording because I can't select different tabs smoothly.
How can I make it so nothing appears when I put my cursor over a tab (I want to keep using tabs though. This feature is great).
View 5 Replies
View Related
Aug 26, 2012
happens with two different images. Haven't done any system updates for a week or more, nor added any actions or plugins. I do have a Wacom tablet that occasionally runs amok* until I unplug and replug its USB cable. It did that recently, but can't remember when. I can clip two layers by using opt+click on the little icon that loads an adjustment layer. Running PSCS6 v 13.0 64 bit on an iMac with OSX 10.7.4, 650 GB disk storage (639 GB capacity, 134 GB available), 4 GB RAM.
View 1 Replies
View Related
Mar 20, 2012
I am just starting my adventure with 3dsMax, and, right after leaving my port, I hit a rock. Encountering a hard steering difficulties, I realized this is not how the program is supposed to behave. URL...
I don't want to suggest anything, but I've read a similar topic (about 3dsMax 9), and the "victim" has been told he has a wrong kind of graphic card, a so-called "gaming card", not a "workstation" one. I might sound as a total noob, and I probably am one, but, all this time I have a PC, I've never heard about two separate kinds of cards, and necessity to having a separate one for playing games and a separate one for designing them sounds really weird to me... But can it be the reason of my problems as well? And if it is indeed, is replacing the graphic card in my laptop sufficient to solve them?
View 2 Replies
View Related
Sep 17, 2012
If you can use gimp or another (hopefully free) program to insert a music or sound file into an image, or signature say, and have it play when you hover your mouse over it?
View 3 Replies
View Related
Feb 11, 2012
Why is my hatch off set from what I want to hatch? I pic the points of the area in 3d i want to hatch but it ends up hatching out of the points i select?
View 5 Replies
View Related
Nov 22, 2013
Using CS5, dropdowns are black, gray text, some positions require hover to see text. How to fix?
View 1 Replies
View Related
Aug 16, 2011
I need to design a walking track 1 mile (5280 feet) from a starting point and finishing at the same point. I need to go around buildings, ponds, etc. What is the best way to tackle this? I thought about 16 splines at 330', but as soon as the spline is moved the distance changes.
View 2 Replies
View Related
Nov 15, 2012
I need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies
View Related
Aug 7, 2013
I am looking for something a lisp or program that would do a light point by point of fixtures in a plan.
[URL]
View 1 Replies
View Related
Feb 28, 2013
Civil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies
View Related