I am using annotative multileaders in model space. When I view my layout drawing in paperspace, they are not there. The layer is not turned off or frozen, the layer is set to plot. When I turn off the annotative feature, then I can see them in paper space (and plot preview).
View 6 RepliesUsing R14 I am unable to print leaders in paperspace. I have created the leaders so they go from one view to the other. They show up fine in the drawing but will not print. How do I get them to show like they are in the paperspace when they print?
View 9 Replies View RelatedTypically, I've mistakenly inserted some annotative leaders into a viewport modelspace instead of paperspace. Trying CHSPACE to bring them into PSpace makes them disappear - can't find them anywhere. Normal objects work fine.
View 2 Replies View RelatedI am working on a drawing where the annotation scale was 1:30 and I changed it to 1:40 and all my annotative leaders no longer line up horizontally (the little line just before the text....see attached example).
Is there a way of globally fixing this issue without having to fix each one independently?
Is there a way when creating hatches, for it to ignore annotative leaders? If the line of the leader crosses the area to be hatched, it breaks at the line. But if the arrow crosses the area, it totally freaks out and won't do what it's supposed to (usually inverses what is to be hatched.)
There REALLY needs to be an option to ignore mleader & mtext objects...
Is there a way to move the tip of the other scale's arrow of an annotative multileader in the model space ?
For exemple, I shifted this tree a little bit to the left. I have a multileader pointing to the middle of it to indicate the tree species. When selecting the multileader, I can use the little blue square to move the tip of the small arrow but how can I move the other one ?
Since that multileader is pointing to other trees as well, I cannot move the whole thing.
I guess I could go to the paper space and into a viewport using that scale, but I need to do that quite often and I'm sure there should be an easier way.
I am using autocad lt 2014 and have some multi leaders on a tool palette that work fine but if I hit enter or right click for enter the multi leader will use what ever leader is set from the multi leader style that is set on the multi leader style control, but only the leader will come in wrong the text will come in correct.
View 6 Replies View Related2012 drawings are not showing multi-leaders, when opened in 2007. We saved the 2012 drawings down to 2004. These same multileaders are not printing either.
View 7 Replies View RelatedIs it true that you can't attach an Annotative Block to a MultiLeader?This is the message that I got when trying: "Specify leader arrowhead location or [leader Landing first/Content
first/Options] <Options>: OP
Enter an option [Leader type/leader lAnding/Content type/Maxpoints/First
angle/Second angle/eXit options] <eXit options>: C
Select a content type [Block/Mtext/None] <Block>:
Enter block name <DOORTAG>: LEGENDNOTE
Invalid Input."
It's unfortunate because I would like the block to show up Annotative in my Legend, and then again to the proper scale with the Multi Leader
I'm pretty new to using multi view blocks and rendering etc etc... basically all I want to do is show my surface (lake and landscaping) as grass, show a clear blue hatch to represent the water line and add some multi view blocks.. people and trees...
Using the multiview blocks toolpalette I have dragged and dropped some blocks into model space and ensured they are at the correct elevation to sit on the surface...
I have noticed that only one of the multi view blocks within the landscape tab is showing as I would expect - the rest all look like an extruded cross... I don't know how to fix this or whether this is correct.
I am running Autocad arch 2011 (as Autocad 2011) and a co worker is using Autocad electrical 2012 and when he works in a drawing of mine the every annotative scale that is used in the file is attached to every annotative object. Which means I have to go through every object and delete scales that should be be there....all my annotative objects appear in every view port because every annotative object has every scale..
View 2 Replies View RelatedI would like to use multi-sub object but can’ t manage to make it work. I need to render a classical wooden crate with a “FRAGILE” logo over.
I applied as first material a proper wood. As second material I applied a standard black material giving a black & white JPEG as a map for the diffuse color of this second material.
Even if in the sample the result is what I’ m searching, when I launch rendering it just tender the jpeg mask over the wooden one.
I know I could place another layer over it and map it, but multi-sub object could be very useful to me in the future so I would like to learn how to manage it.
How do I make annotative tags, callouts, and blocks non-annotative. AutoCad will not let me change them in the properties tab.
View 1 Replies View RelatedI have a co-worker who needs to create a block where the attributes scale with the anno scale, but the block container does not. He's creating a tree block and wants the canopy and trunk attributes to scale without scaling the tree symbol.
Making an attribute annotative and applying the scales to the attributes doesn't seem to work if the block itself isn't annotative.
Are we missing something, or is this just not possible?
Is there any trick that bring in an annotative block into a drawing at the annotative scale you are working in, not the scale the block was created in?
View 2 Replies View RelatedWhen I construct a multi image contact sheet and send it to my printer the file is aborted. Mac Pro, 15 GB ram, OSX 10.6.8, Epson 7890. LR4.
View 2 Replies View RelatedI have attached the block for reference. Now that I have found the error of my way with the annotative cutline. I have a slab-on-grade block that needs to have annotative hatches; I also need the cutline to be annotative and dynamic so that as the drawing scale changes the scale of the cutline will be match and I can adjust the length of the extension lines. I have made the cutline a nested annotative and dynamic block within the slab-on-grade block. When I insert the block into my drawing the cutline is annotative and the dynamic grips show up but they do not work.
View 0 Replies View RelatedHow do i draw a leader with all 90 degree angles. When i'm drawing a leader with an arrow for example and select two points it makes an angle.
View 4 Replies View RelatedMy company is in the process of updating the entire block library to be annotative or dynamic (depending on the usage) and it's been wonderful for new projects.
The problem comes in when we have to update an existing dwg. When we try to "blockreplace" the new annotative tags for the old non-annotative tags. These tags have attributes, but we have literally not changed anything about the blocks except the "annotativedwg" property within the root block file. When we run block replace, the old blocks disappear completely! they're not at a teeny scale or a gigantic scale, they're not on an "off" or "frozen" layer, they just fully go away even if you say "don't purge the old block that is being replaced".
I usually don't have a problem "doing my job" and just going through and replacing them individually on the smaller sized projects, but most of our projects have upwards of 700 - 1000 tags per dwg. Slightly tedious as you can imagine, especially since I am addicted to finding newer faster better ways to draw.
I created a dynamic block that contains a quick leader. The problem I have is when I go to my layout views the leader in the block does not show up. If I edit the block, change the layer of the leader and save it then the leader will show up in viewports. Other parts of the block are on the same layer and show up, it is just the leader for some reason.
View 7 Replies View RelatedI do a lot of taking other peoples drawings and incorporate our portion of work onto theirs and often shrink the viewports to our sections alone. Their drawings often have information that we don't want on our drawings to insure we are not responsible for the work. Presently, they drew the detail in ms and annotation in ps (which i personally think is retarded).
I want to keep the dimensions but not the leaders and comments. Is there any way to delete all mtext and leaders quickly without deleting dimensions. Only think I can think of is highlight dimensions and convert them to ms via modify then go into ps and ctrl A and delete.
Any export issue with Revit, where the leaders in the Revit model are exploded when the model is exported to AutoCAD. If so is there a setting or a procedure in Revit that fixes this other then redrawing the leaders in AutoCAD?
View 2 Replies View RelatedWe recently upgraded from Autodesk Inventor 11 to Autodesk Inventor 13. For some reason the text box cuts off any leader I try to put over it. I thought this might be a glitch on my machine at first till I realized that it would not work on any machine in our office. I must have clicked a wrong button or something when installing Autodesk Inventor 13 because it worked perfectly fine in Autodesk Inventor 11.
View 7 Replies View RelatedI was adding text and leaders to a drawing and after the text was entered I pushed the escape key. It then asked me if I want to save my text. It also had a check box asking me if I always want to perform that so it wouldn't keep popping up with that question. Well, I had checked that I didn't want the text and I also checked the box to always perform that answer. And now it won't save any text that I write. It just keeps the leader. How can I get the text to stay and undo the box that I checked to always answer that way (to not keep text)?
View 2 Replies View RelatedIn one of the xref’s there is a linetype that I’m having trouble with (actually I’m not sure if it’s the linetype or a setvar that’s the problem). The line is a polyline. Linetype generation is turned on. LTscale is set correctly. The line is set to display the linetype by layer…not entity. Line weight is set to default. It has a global width of 0.333. Here’s the problem….In the main drawing, I have a layout which has leaders in paper space pointing to the line in the xref. They are touching the line where I want them. THEN…when I print the page….the leaders are no longer pointing to the line. They (the leaders) display correctly but can’t be printed as seen. Not to a PDF, not to a printed page. See below:
What I see....
RIGHT.jpg
What I get.....
WRONG.jpg
UPDATE: It looks like the problem is with the drawing that the xref is attached to....not the xref!
So we are doing some plans production standards. One thought was why are leaders needed if all the object are called out witha station and offset in civil engineering plans?
Why use text leaders in cad plans?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Is there any way to align leaders in a drawing file? I can't even seem to get a "tracking" line so I can manually align them.
Dell Precision T3500
Intel(R) Xeon(R) CPU W3530 @2.8GHz
ATI FIrePRo V5800 (FireGL V)
12 GB Ram
64 BIt OS
I need labeling my alignment. Ive been trying to figure out a way to label my alignment in drawing with a 45° line that guides another line and text oriented by view that names the station and a setting that starts a count, like "COURVE 1, COURVE 2", from the start to the end of the alignment. All on an adjustable length line, but all I got is fixed length lines, and I'm having overlapping problems when I have multiple horizontal geometry points or other points to label.
Dragging the labels upward pull the leader line component with them and they do not remain anchored to the structure. When I say leader, I am not referring to the dragged state as that creates a leade with a landing at an angle. When i use the grip in the alignment, it comes to an dragged state label, it doesn't fit the pattern I need. What I really want is a line component anchored to the alignment point even though I drag the "Line 2" and the text of the label upward or downward, while these are still oriented by the view.
The text that we're using for the majority of our notations doesn't look very good at 1.0x scale so I try and adjust the paragraph line spacing to 0.8x as I go. I also know that if I create MTEXT and adjust the paragraph line spacing at the prompt it will "stick". However it doesn't stick for leaders and there's no real way of creating a permanent setting, is there?
Slight inconvenience of adjusting that setting each time I create a leader.
I have a part rendered in Inventor Studio- Looks great when I save it as a .bmp and print it. How can I add dimensions and leaders and callout to this rendered imaged?
View 3 Replies View RelatedI have recently started to have a problem with lines, leaders, blocks and x-refs etc, straying from level 0 for z. I think it may have something to do with the fact I am making use of files from cad duct 3d software, how do I prevent/resolve this?
View 3 Replies View Related