When I open one particular drawing on computer "A" it contains a layer called "minor contours" and all of the information from that layer is shown in the drawing. When I open the same file on computer "B" all of the minor contours lines are missing. The major contour lines and text are visible but the minor ones are not found. The one layer that contains the minor contours is there and I can draw new informaiton on that layer and it is visible. Also, if I was to save the drawing on computer "B" and re-open it on computer "A" the minor contours are no there. If i was to save the file on computer "A" and re-open the file on computer "A" the contours are there.
Also, I have tried this on another computer and it reacts the same as computer "A". For some reason it is just computer "B" that is not able to see the files.
So you are aware all of the computers are using autoCAD LT 2013 and are running windows 7. They are also all hp models with almost the same internal hardware and software.
how to fix this so that computer "B" is able to see these contour lines and save the file without loosing the information.
We resently upgraded to Inventor 2013 and since then we have been having an issue of dimension and leader lines being hidden under a text box or some other drawing entity.
This is very confusing since the text box does not have a white out associated with it, nore is there a way to put the test box to the back and dimension lines to the front...
It seems like our puppet masters that program this amassing tool where up to something and didn't quite get there.
IT sure would be nice (or an absolute requirement) that this gets fixed so I don't have to learn new hoops to jump through to get a quality drawing out of Inventor.
Problems I'm having with hidden lines being visible in certain viewports and not others.I've dimensioned my drawings in model space, which I prefer, and put the dimensions on a separate layer. However, including that layer in the viewport causes the hidden lines to be visible when plotted. If I turn that layer off, everything works great.
I have dimensions for the same object in plan view that I'm showing in a different viewport that works just great, but in the front elevation viewport it gets all screwy.
I can dimension in paper space just fine.I prefer to dimension in model space whenever possible.
I have an assembly that I want to put some wires in, but every time I create a wire between pins, or a segment, or anything through the Cable and Harness tool, the centerlines don't show up. The rendered wires can appear, but without any sort of way to get at the centerline, I can't set its path or anything like that.
I was wiring up components no problem in a sub assembly, but for some reason it just won't work in my top level assembly. I thought it might be a problem with how I added pins to the components, but even trying to create a wire between 2 connectors from the content center gave the exact same results.
there is already a style set from the file i'm using, when i am trying to get the measurements from the line to show up, they aren't doing so. how do i get it to show the lines when i modify the text and make it become visible?
I'm having issues involving hidden lines that should not be hidden lines in the idw environment.
I am using Inventor 2010 suite, 64-bit. I have largish assembly modeled with several sub-assemblies and a few reference assemblies. Some of the reference models are shrinkwraps from other large assemblies (surface type shrinkwrap, link broken), and other reference models are acutal assemblies that I am unable to shrinkwrap because I need the positional reps that they provide.
When I place my parent assembly, with all the normal and reference models included, on an idw, large portions of the reference models do not show up. If I change my line style to show hidden lines, the missing parts show up. At first, I thought that it may be because the reference parts in question were not originally in the view due to the reference data margin, so I started a new sheet and set the margin large enough to show the entire machine, as well as the state of Michigan, before I set the base view, but I still don't get those parts unless I enable hidden lines.
Even at that, Inventor is not behaving consistently. Some of the parts that won't show unless hidden lines enabled are fabricated parts that I or a co-worker modeled, some of the parts were imported from SAT, STEP and IGES files, and some of them are shrinkwrap parts. On top of that, some of the parts will show up normal (without hidden lines shown) if I change the part's BOM structure from reference to normal, while others still will not show unless hidden lines are enabled, regardless of the BOM structure. Keep in mind, none of these parts are hidden behind anything in the model, even with everything visible in my design view rep, so what's causing Inventor to think these parts are hidden.
Computer Specs: Dell Precision M6500 mobile workstation (purchased in April 2010) Windows 7, 64 bit OS Intel i7 processor 8 GB RAM NVIDIA Quadro FX 2800M graphics Inventor Suite 2010, Subscription Advantage Pack, SP3
Computer Specs: Dell Precision M6500 mobile workstation Windows 7 SP1, 64 bit OS Intel i7 processor 12 GB RAM NVIDIA Quadro FX 2800M graphics Inventor Suite 2010, Subscription Advantage Pack, SP4
I'm using AC 2011LT on a PC Every time I print to PDF or printer a line appears which is not visible on the model or paper space. It is even not visible when I preview the print before printing (again from model or paper). And on different layouts the line moves and sometimes doubles.
I have done all the regular things - all layers on, all unfrozen, all visible, etc, I've purged, regened, made a save as file, gone to another persons computer but still the same problem.
Just upgraded to REVIT 2013 and now many types of lines are not visible on screen- randomly it seems. Also, sometimes they don't print, either. I've tried increasing the fineness of the view, changing the material definitions, etc. Most often this is happenning when I have opened an old file and had it automatically update the file. Also, it seems to happen within asurface texture, but it is not limited to that circumstance.
I have encountered this issue in a pdf file that I generated using my R (statisitcal language) scripts. The file contains 3 smoothed but wiggly lines where parts of a few lines vanish when I open the pdf file in illustrator. Opening the same pdf in any pdf viewers turns out perfectly however. I need to further edit the pdf file for publication purposes, so having parts of the plot missing makes this a headache. I've done other plots before with R, which can be edited in illustrator perfectly.
My file looks like this in pdf viewers:
In illustrator it looks like this: This is the case for both CS2 and CS6
There was a similar query previously, but the problem didn't seem to be solved. [URL] ....
I am working in Illustrator CS6 on a Mac (10.7.5) and on some (but not all) of the objects in my document, the paths (not strokes) are visible as light grey lines. This occurs in objects that are stroked, filled or both. I can make a stroke thicker, but the 'path' is still visible in the center of it. The Appearances panel gives no indication of what's going on.
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013 Vault Collaboration 2013
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
This isnt so much of a problem as an annoyance. When I try to make poly lines from connected single lines my procedure is as follows...
pedit, right click, multiple, select lines/objects, enter, yes, join x 3, esc
My annoyance is if i hit join once it will not make the lines into polylines, if i hit join 3 times or so and then esc it will.
It just doesnt seem that is right and I think i might be missing something. I have been doing pedit this way for a long time adn its probably finally time to figure this one out.
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
I just recieved a structural drawing from an engineer that has the entire drawing drawn on layer 0. This poses many problems for me as I need to differentiate text from lines and lines from lines. The darwing does have two colors although entities are still on same layer. Is there any way I can seperate the yellow lines from the red lines even though they are on the same layer?
I am new to Inventor after using Unigraphics for a while and finding the modelling side very similar so no problems there. the problems are starting when i am producing drawings.
I am trying to manually break a dimension extension line around an inserted symbol ( surface finish symbol) and can't figure this out. I have noticed that Inventor automatically break dimensions round other dimensions but is there a way to add a manual break?
Also is there a way to break a center-line round dimension text? i have added a picture with the problem.
In both model and paper space, rectangles with corners filleted look fine. However, the filleted curved corners are not joined with straight lines once it's exported/plotted to PDF. I have to zoom in very closely to see this, so it won't be a big problem for actual printing. But I can't figure out why the lines are broken on PDF when they are well joined in both model and paper space.
I tried changing PDF quality, plot style, and anything I can think of, but to no avail.
I'm having a problem where in 3D/model mode certain objects are sometimes not visible. A lot of times they show when I'm zoomed out, but then they disappear when I zoom in on the model. It happens with AEC objects like windows (strangely it will often be one window and not the rest of the windows), but it mostly happens with 3D solids that would be in vanilla AutoCAD.
one of engineering company sent dwgs... in those dwgs have some attributes i make x-ref of that one dwg and than attach but after attaching attributes is not showing in attaching dwg....i have apply attdisp command and also attmode command..
