I am unable to apply textures to the maodel I made in inventor.
I tried doing it from the iproperties as well as the top down option we have on the top. Its not working.
Where as, If someone else logs-in in my system, they are able to apply.
Is it possible applying textures on solid surfaces in AutoCAD 2012?
If yes, how do I apply textures on them?
I cannot seem to find out when and where it's ocuring. I took measurements of a large room and modeled it in Autocad 2014. The solids I used are rather simple, mostly just boxes with some boolean unions and substractions here and there. I then took pictures of every wall, perspective-corrected them, imported each of them to Autocad as material, assigned the real size to the picture material and applied those materials to the corresponding wall faces. Planar mapping proved to be adequate in all cases and mostly mapped correctly on the first go.
The project was completed and saved. To my horror most of the material mappings had just gone the next time I opened the project. It was just as if I had never applied any material mapping or texture to the faces.
After partially appliying the damned material mappings and materials (textures) again I tried to determine under what circumstances the mappings get lost. Its not allways the same walls. The bug seems to occur randomly on various geometry and at various times. Sometimes the mappings get lost after opening the project, sometimes the get lost on the fly when isolating (hiding) geometry. There is no way I can get the room to look as I want it to look as there will allways be some wall that has become default-grey again, randomly (either while working or after opening up the project again).
I really expect Autocad to be rock solid after so many program versions. Did I do something wrong? How would you go about applying textures of inividual walls to wall-faces? Or is Autocad just crap regarding heavy use of textures because that is not the average use-case?
I've got this hinge working using translational constraints - but I don't seem to be able to apply an angle constrain to it to drive it.
I can't apply an angle constraint when using it as a flexible assembly either - and the flexible assembly keeps throwing an error to do with the translational constraints.
I have recently transfered from 1 PC to another and none of my model directories are the same and I need to apply textures without going 1 by 1 in the material editor. How can I take 20 textures such as eye, skull, shoes and quickly put them on my character?
View 6 Replies View RelatedUnable to find a way to show dual dimensions in my model shetch.
View 8 Replies View RelatedI have some turbo squid models with uv maps that I am trying to import into Photoshop CS5, but the textures don't show up anywhere.
View 7 Replies View RelatedI've gotten a hold of a bunch of old .3ds models with accompanying texture folder. I've imported the .3ds file into MAX 2011, but it doesn't seem to automatically assign the textures to the mesh the way FBX does. How can I get these files into the new Max with the textures in tact?
View 9 Replies View RelatedHow do I turn off the apply to layout button in thi window
View 4 Replies View RelatedIs there a way to apply a stencil to an entire model at once? if you wanted a lizard to have scales all over, uniformally, and then mask them out where you wanted, is there a way to do that in one step as opposed to painting over the stencil, rotating the model, painting over the stencil, etc.. etc..?
View 2 Replies View Relatedi want to apply the symmetry mode only for the red polygons in my medel.
how can i do this?
i try to update my photoshop i click the setup file and nothing apear after file is decompress i see the progress bar goes to 99% for a while then after 2 minutes disapear and nothing happen even if i wait 5 minutes
im runing windows xp sp2
i try to export JT files WITH textures to use in other programs. When I create and export an object as jt with inventor, and import it to inventor again, all textures(from the library and also selfmade) look just fine. When i try to open the same file with 3ds max or jt2go it just doesn't work.
View 1 Replies View RelatedJust looking for some good effects to put on an art piece. Some sections are very dark and I'd like to add some accent to them. I know that solidworks was some textures that emit light, I was curious if there was anything like that in Inventor.
View 7 Replies View Relatedbeen unable to apply text to a new image?
View 5 Replies View RelatedAm trying to convert this pump into solid ?
View 6 Replies View RelatedMy problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
Currently i´m looking for a duplex 3/4 chain texture for Inventor. How to make a picture into a material inventor accepts?
If i open the style editor only lightning shows up.
The material is already in the material browser but i can´t assign it to a selection only.
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
- Factory Design Suite Premium Subscription-
I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View RelatedI'm having trouble with applying curves. I import a PDF and try to apply curves to it. After I open up curves and change the settings, I see the live preview on the PDF, but when I press OK to save changes, it goes back to the original PDF as if none of the changes were saved.
I also tried applying curves as a new adjustment layer, and that appears to make the changes stick. But if I resave the PDF or print it out, it still comes out looking like it did before the changes I made.
Lastly, I tried adding curves adjustment layers, and then merging all the layers, or flattening the image. In both cases, the PDF went back to what it looked like originally.
Using CD X6 (d/l version).
I have a list - want to apply bullets, but cannot.
I've tried changing fonts, but bullets are greyed out in the paragraph section of text properties box for every font I choose. I've selected many fonts ... still ... no bullets.
I have a lofted surface and would like to make a difference with another surface.
This doesn't work (Difference returns absolutely the same 2 objects instead of Object1 - Object2).
In the attached example, I would like to have a square "window" in the "wagon" shape.How can I do it ?
When I attempt to apply the disc menu to my video project it never actually applies it to the timeline.
View 1 Replies View RelatedInventor seems to do lots to allow for simulated appearance textures. However, how does one use actual physical textures, e.g. for a plastic part? I need one surface of the plastic part to be very rough/bumpy, another to be slightly rough/bumpy, and another to remain smooth/untouched.
Let me be forthright and say I have no background here in textures/plastics/molds etc.,
I had with a custom texture not showing up on my parts while they were showing up on a coworkers computer fine. I recently cured my own issue (I just needed to click Textures On in the View toolbar under Appearances). I am thinking it is going to be a simple fix as well but I have not been able to find it.
Everytime I close out of a part or assembly it automatically turns the textures back off so I have to turn them on everytime. I looked through the Application Options and Document settings to keep textures turned on but could not find anything. How to turn the textures on and leave them on?
Why's that Whenever i'm at the stage of modelling my 3D models i can zoom them in. But When i try to save them . Sometimes i can't zoom them. ?.. What should i do. I tried regenerate but i't seems doesn't work. Also my autoregen is on..Tsk.
And also when i try to add models from other acad files i can't zoom them in either. Tsk darn it.
I can zoom them but the zooming that i get in the first place is not the same. Like it skips from zooming....like before it was a 1:1 zoom but when it save or add models from other acad files boom it becomes. 1:5 sometimes just a couple of scrolls it give me the background color only. i can't see my model boom!
I have PSPx4. If I select an area of the image and try to apply color balance (Adjust|Color balance), the effect gets applied to the entire image, not just the selected area. Is there a way to apply color balance to just a selected region?
View 5 Replies View RelatedThere must be a way to get the line weight to show in model space. It shows up as specified in print preview and printed, but not on the screen. Is there a setting for this?
View 6 Replies View RelatedThe text that I Entered in model page, can't show in layout page. How to solve
attached file.
When I go to model space I am unable to adjust the view scale. Although I can get to the prompt for a new scale value, the program will not accept my changes. Is this locked somehow?
View 6 Replies View RelatedI have a hatch pattern in one of my objects. I want to apply exactly the same hatch pattern to other objects but I don't remember the settings for original hatch.
There is a command in ACAD to apply properties of one object to others (brush icon in toolbar). I tries to use this command but it seams that it doesn't work for hatch.
What is easiest way to apply a hatch pattern from an object to the other one?