I use INV2013. I happen import a solid part with lots of holes. I wanted add thread to 15 off existing same size holes.
1. I am unable to select more than 1 hole at a time to add thread. Need to go one by one.
2. But, thread option doesn't remeber the last thread details selected. So, I need to reenter all the details again. which is time consuming.
We have been experimenting with Parallel threading. The situation is that I have an assembly that contains multiple parts (approx. 40) which all have contained "almost" the same code. In order to rationalize this; we have rearranged the code in such way that we now only reference External iLogic rules form these 40 part files (only one place to revise the code if necessary).
The side effect to this rationalization has been the we have problems in executing the codes in parallel, see this simplified example:
Imports System.Threading.TasksParallel.For(1,40, Sub(h As Integer) iLogicVb.RunRule ("Part "& h &"", "iTriggerRule") End Sub)
Now all of these 40 part files try to execute their code.
'Configutation of Part filesiTrigger=iTrigger0iLogicVb.RunExternalRule("Cut configuration")iLogicVb.RunExternalRule("Bracing of the part")iLogicVb.RunExternalRule("Parameter context")
As they all are dependent upon running the same external rules the result is that not all part files are updated according to the required design requirements. It seem as if one of the part files calls the external rule and the rule is "busy" handling another part file it just terminates without warnings or errors.
Can multiple part files run the same external rule at the same time? Is there some form of queue? I do not get any warnings or errors, the partfiles just do not update. How can I make sure that all the part files run the external rules and is there a way of checking this?
My copy of Inventor 2014 will not remember the customizations I perform to the ribbon. I simply added the PDF command to the Drawing/Vault/ ribbon, and when I save and close properly and reopen, the customization is gone. It did remember all my custom keyboard commands, just not the ribbon command.
View 9 Replies View RelatedHow do you thread two different text box with two different text format? Eg. Text Box
1: Font Size 50pt...Text box
2: Font Size 10pt..
Once you thread the two text boxes; and delete the content in Text box 1, what ever the content that flows to Text box 1 from text box 2 should auto format to Font Size 50.
I have a flexible sub-assembly in my top assembly. Sometiems I'm trying to demonstrate to others how a mechanism in the sub-assembly works using this flexibility feature. It works great, but when I move just one little part of a flexible assembly, Inventor displays the wire-mesh of the entire flexible assembly, because technically the entire assembly is selected, even though I'm only moving one part. It clutters up the screen very badly, detracting from what I'm trying to show.
Is there a way to prevent Inventor from displaying the selection lines? Either only when I'm moving a part in a flexible assembly (which would be great), or to just turn them off completely when I'm presenting like this? I know I can turn off pre-select, but that doesn't work, because once I start moving a part in the flexible assembly, the assembly is "selected" and the wire-mesh displays.
AutoCAD Mechanical, using the <<VANILLA>> variant.
Click open icon. AutoCAD pops up the file open dialog box, in the wrong directory. I select the directory where my files are and open a file.
Then I click the open icon again. AutoCAD pops up the file open dialog box in the same wrong directory. I have to change directories every time I open a file. Yes, I have the directory I want set in the places. But that's never been how AutoCAD works.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
When I select tools>Autolisp>Load Application from the menu, the default folder it shows is a random folder (same one every time) and I have to navigate to where my lisp routines are. In 2012, it opens up directly to my lisp folder. The command it is executing in both circumstances is "appload". Or how to select a default folder?
View 9 Replies View RelatedEvery single time I start AutoCAD 2013 my Properties Pallete's columns reset their size.
I've tried re-saving workspace to a new one. It won't work. It also doesn't matter if I open application using shortcut or by double-clicking DWG file.
like in AutoCAD there is REMEMBERFOLDERS can u tell me if i use syntax with getfiled and i want the path to be remember next time what should i do or what syntax i use for that.
View 1 Replies View RelatedI have misplaced my Photoshop book and I have a project in which I need a tool and I can't remember what it is. It is a particular type of brush, I belive, that grabs the colors from the surrounding pixels to blend color. Does this brush indeed exist, and if so, where can I go about finding said brush?
View 2 Replies View RelatedFile settings have been moved to the printer settings. Each time I go to printer settings and specify the paper (heavy glossy in this case) and/or number of pages to print...
I get only one page printed. Each time must reprint AND reset the paper type.
Settings are NOT remembered as Adobe says after clicking either the Done or Print button.
This is CS5 32 bit Extended v 12.0 on HP color laserjet 2605dn (duplex printer. HP only makes a universal driver now, this is the latest version on Windows Pro 7.
I running a bunch of images through the save for web, and each and every time I have to navigate to where I want the final images to go.
View 3 Replies View RelatedI'm recovering from a crash and trying to install PhotoFrame 2.0 into PS7. Remember the problem?, the PhotoFrame wants to install in folder: Photoshp.exe (dropping the O because they were limited to 8 letters?. Newer os allows full name. I think Erik, you are familiar with the problem and the fix. But do you remember?
Hope some ones does. I did install the program in old PS5 and used Erik's technique of having plugins on C drive and making a shortcut to PS7's plugins but can't see to get the whole program to move over.
I choose black, make some text and accept the outcome.I then click in the file to do it again, and the text box color at the top reverts to white. CS5?
View 7 Replies View RelatedFound one more problem with Save For Web in Photoshop CS6.
Example:
1. New Document
2. Choose - Save for web
3. In dialog window Photoshop CS6 offer to save in - os My Document Folder
4. Ok, every time I don't really need to save in os folders - I save files to my folders. So, change folder ...for example to disc D
5. Create another New document
6. Choose Save for web
7. And.... - Photoshop CS6 offer to save my file in os My Documents AGAIN !!!
So, in fact it's real uncomortable!!! ...if I save different files for web frequently ....I need every time change My Documents....it makes me nervous.......Here - compare with CS3: CS3 remember "old" folder location even at another session (for example - after reload os)
Is there any fix this problem?
p.s. Testing on:
OS - windows 7 64 bit
cs6 - 64 bit extended
cs3 - 64 bit extended
How come my page size keeps changing back to the default (Din A4), even thought I've changed it and clicked either 'done' or 'print', even on the very same document? How can I have Photoshop CS5 remember the page size and the other variants?
View 9 Replies View RelatedI used to have an Illustrator action that selected all shapes with a similar fill and stroke. But since actions are completely broken in Illustrator CC, I've tried getting used to the Magic Wand tool, which basically does the same thing. Except in order to make it only select shapes that have the exact same stroke and fill like I want, you have to select all the checkboxes in the Magic Wand palette and set the tolerance values to zero. I don't mind doing that once, but Illustrator keeps reverting the tolerance setting to 32 and unchecking every box except "Fill Color" every time I restart Illustrator. I even tried setting the panel the way I want it in each New Document Profile and saving the files, but that had no effect.
View 1 Replies View RelatedThe quick color selector in the main toolbar (fill and stroke) always resets their thumbnail sizes whenever I quit Illustrator.
I use a 27" monitor and prefer large thumbnails in my fill and stroke palette in the toolbar - but is there no way to make Illustrator "save" the settings when I change it to large thumbnails?
if you have ten or twenty sets of HDR pictures in some particular folder, that the dialog could remember what folder you've been in all day, instead of moving you back to My Pictures each and every time? I spend half my workflow effort on repeating the same folder navigation steps over and over.
And why do I have to browse from there at all, instead of being able to select pictures in the organizer, or drag-and-dropping them?
Even when I load one picture that doesn't fit with the others, and try to exclude it... the only thing that works is to re-browse. Otherwise the Align button remains unavailable. Likewise if you adjust the sliders a bit wrong and hit okay... to try other settings, it's back to the folder navigation again.
How can I make Illustrator's layer-panel remember the opened/closed sublayers? I have a file with hundreds of layers, and it's a pain in the *** to do the sorting and opening/closing certain sublayers each time I open the file. Why isn't it remembering how I have set it up?
View 2 Replies View RelatedI just installed PSE 11 on my Mac (OS X 10.8.2). My previous version (PSE 6) would re-open all files that had been open when I quit the app last time, but this version always opens with a blank screen. I can't find any preference in PSE to affect this, and the overall Mac setting is set properly. How can I get PSE to remember what files I was working on?
View 5 Replies View RelatedSince Lion or Mountain Lion, we have had an annoying problem where the last folder location is not remembered in Illustrator. For example when updating links on multiple files, would like for the folder location to return to the last one used, but this would go to some folder 3 levels higher/
URL....Also the software seems to not have bneen updated in a long time, adn don't wnat a solution that won't last. Am on 10.8.2.
why doesn't gimp remember windows toolbar dock setup at the start on the left hand side and the right side?
View 2 Replies View RelatedExperiencing problems with the dimension tool since upgrading to Corel Draw X6 at this end, which hasn't been resolved with the updates.
I work in mm. The system doesn't remember the default settings if I change my preferences for it to measure in mm via the customisation window or the toolbox as it used to in previous versions. When I open the program again or start a new document, the measurement default keeps changing back to ["] (inches). Sometimes, it will jump back to inches after I change the default to mm when I'm working on the same document.
Same problem seems to be happening with the other units of measure available as well.
Current workaround - the only time it seems to remember my settings is if I change the default to mm and then save a document.
I can fwd a video screen capture which shows the problem if that would work.
When I click File the drop down menue at the bottom has five entries for recent jobs. The most current is a file I worked on three or four days ago. How do you make Corel remember what was the last job opened?
View 1 Replies View RelatedIs there any way in an Inventor Presentation file to select all identical parts of an assembly other than the obvious and grueling process of manualing selecting each part in the model navigation panel?
I am looking for a more effective way to color code for a set of assemblies that I have to produce. If the ability to use a mass selection process for individual parts exists it could save me a tremendous amount of time and energy.
What are some good tips/tricks for selecting multiple surfaces. I have a model that is composed of something like 1500 individual surfaces. I'd like to know if there is a way I can select only the "Top" surfaces, or edge surfaces (or alternatively if there is a way to select all surfaces that are visible from the Top view or side views). Something like selecting loops, and chaining when dealing with sketches would be useful.
What I'm trying to do is extract the upper most surfaces out of an imported collection of surfaces (its a cube-like shape, not organic or curves), and then use them to create a thickened solid. I don't want to spend the time making the 300 clicks necessary to get all the surfaces by holding <ctrl> (not to mention a wrong click without <ctrl> could send you back to square one).
I'm borrowing from the samples library in the Inventor:
Public Sub GetSingleSelection()
' Get a feature selection from the user
Dim oObject As Object
Set oObject = ThisApplication.CommandManager.Pick(kPartFeatureFilter, "Pick a feature")
MsgBox "Picked: " & oObject.Name
End Sub
Works fine, and is fairly simple, but the problem I'm having is if I press the escape key after starting the command, but before making my selection, I'm not able to start the command again.
I realize from my searching that using the Selection (Simple) sample allows for an interrupt, with some modification, was just wondering if there was something similar for this simpler selection option.
I have several iitems that I need to place coincident to a single surface. Is there a way to select the surface and then just select each of the other components without having to select the main surface for each item?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
I have a selection of various components in an assembly model in Inventor which I want to use to demote. When I click off these components the selection set is lost. Is there a way that Inventor can remember a selection set of components so that I do not have to re-select all the components again ? Similar to the 'select-previous' command in ACAD ?
Product Design Suite Ultimate 2013
64-bit HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I am looking for a way to have the ok and apply button gray out until there is a valid selection made in the UI. How can we control if those 2 buttons are active or not?
View 2 Replies View Related