AutoCAD Inventor :: Finding Curve Length In Layout
Nov 10, 2012How do i get the length of a group of curves?
if i have some lines and arcs all joined as one continuous curve how do i dimension the total length of these in a drawing layout?
How do i get the length of a group of curves?
if i have some lines and arcs all joined as one continuous curve how do i dimension the total length of these in a drawing layout?
I'm trying to write a VB.Net program (Visual Studio 2010 Express) for Inventor 2012 that will add up the length of all the edges of a flat pattern including any cutouts/holes in the part. I need the total length to do an estimate on the amount of time required to cut out the pattern on a laser. How to get this info programatically in VB?
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
I am try to create a function that compute the length of a line such as the picture shows on top. The code I have now only getting the straight line distance. It's there a way to compute the curve distance?
View 3 Replies View RelatedHow the length of the vertical curve is calculated in the C3D?
I’m wondering regarding the equation used to calculate the length of the vertical curve.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
is there a way to figure out the radius of a corner in Corel Draw X5 if it is a curve?
View 7 Replies View RelatedHow to sort curve table data by parcel and then curve length? Out here in Oregon, one of the standard ways of defining a curve table is to show the length of curve and have each curve in the parcel grouped together.
I have not figured out a way to do this in C3D. At one point, Sinc had started working on the issue for us, but I don't think he ever got anywhere with it (or at least it didn't get into his add on.
I've just started using Paint.Net, primarily for pixel work. I needed a program that had the curve line tool but with extra features than the ones provided in Microsoft Paint. But it seems that I've came to a problem, the lines are anti-aliased, even at 1 pixel big. I was wondering if there was a option to turn the aliasing off for the line/curve tool.
View 1 Replies View RelatedI try to create a curve with 3 or more equal segments. When I draw random curve using the "Freehand tool" I always get curve with several not equal segments.So how can I create a curve using VBA Macro so that the curve has equal length of the segments.I attach two pictures with curve that i have and with curve that I need to have.
View 11 Replies View RelatedCan CorelDraw X4 calculate the length of a curve, meaning if I have an organic shape or curve, can it calculate the true length of the line if you follow the path. (think miles on a road)
I'm trying to estimate the time it would take a CNC machine to cut along an exported path.
I want to draw hyperbola curve whose equation is x^2/a^2 - y^2/b^2=1. May I use equation curve tool to make the above hyperbola.
I have also made a hyperbola curve of aforesaid equation through conventional method on mathematical ground in the past.
How to construct a table to lay out the "horizontal curve" on the ground?
The steps that follow the design of the horizontal alignment is to set up it on the ground. For this purpose a table that contains angles and distances is established to set up the curve on the ground. How this process is performed on the C3D.
How can you add the chord bearing, chord length, and tangent to an alignment table with the curve data in it? I have the length and direction but cannot figure out why the others will not load and update in the chart. I am using Autocad Civil 3D 2012
Autocad Civil 3D 2014
Windows 7 Prof. SP1 (64-bit)
Precision T3500
Intel (R) Xeon(R) CPU W3550 @ 3.07 GHz
6.00 GB
NVIDIA Quadro 4000
I am looking for a 2D to 3D tool for inventor. According to some posts there is a tool at Autodesk Labs but this appears to have been discontinued.
Are there any tutorials / videos of how to achieve this goal now?
Is there a way to identify what sketch or Solid a reference parameter (d0, d1, d2 etc) is in / on.
View 3 Replies View RelatedI am trying to set up a search folder in Vault that would find files checked out by all the users.
In my Tools---Find I would set the Property for Checked Out By, Condition to contains. Now, what to enter in the Value window so it searches all the users, the thing is I dont want to enter all the user id's, there are quite few of them.
it here instead of Vault's message board but Vault's one seems to be rather inactive.
How do I need to write the code in Ilogic to find the sin of a number. It works fine in a parameter as sin (43) but does not give the same value in ilogic.
View 1 Replies View RelatedIs it possible to change the length of a line based on the length of an attribute?
I'd like to make the line a MINIMUM length of X" (I haven't decided how long yet--but know I'll need a minimum). But then after the user fills in the attribute, I'd like the length of the line to change to the length of the attribute plus a small amount (again, I haven't decided yet how much extra).
I was wondering if there is a way with DB's to have a line "follow" or "grow" with the content/value length of an attribute. Maybe some method of linking the attribute width to length of the line? Essentially, it would work just like turning on the underline setting when typing in mtext editor (or any program with an underline option for that matter), expect that the line could be placed anywhere, and would not have to reside directly below the text.
View 5 Replies View RelatedCommand to make a line change length to match length of a line, arc, polyline or circle? Could use this when making flat patterns layouts.
View 5 Replies View RelatedWith using superelevation wizard in Civil 3d 2012, changing the lane width is not affecting the resulted values of transion length and run-off length, Is that correct ? ( as civil is using standerd AASHTO tables which assume that lane width typically is 3.6m )
Also, There is only 2 tables for 2-lanes and 4-lanes roadway, Is it for total road width or for one directon only, and what about different no. of lanes ?
I am creating a block with attributes for a standard job. I have (4) total attributes in this block (for example: panel type, qty, length in imperial, length in mertic)
I would like my length in metric attribute to automatically populate based on the input from length in imperial.
Is this possible?
VBA routine that will allow you to select a work plane in the browser and find all sketches that are defined by it. We do extensive skeletal modelling and our master parts consist of many sketches and sketch planes
Note, I am aware of the VBA routine that allows you to select a sketch and highlight the plane or surface that it is made off of.
I am well versed with the FEA system, however I do not see any way to get total pressure or load on a face. I know the info is there, the results let me probe points on the face, I just cannot find a way to get the total.
I have attached an image that illustrates the situation.
I will even dive into iLogic again if it is possible to achieve my goal there.
We want to ensure that a balloon callout exists for every item in the parts list (BOM) in our assembly drawings. Is there a way to easily do this?
Currently, if we have an assembly with 30 parts, we manually search for each of the 30 BOM balloon to verify that none were missed. Since the balloons are not in order, balloon 5 could be on page 2 while 6 is on page 8. This method is often time-consuming and error prone.
It probably goes without saying, but if ballons are missed, then assemblers have nothing to show them were the parts go and either come ask us or guess.
i want to ask is there any scale factor function in Autodesk Inventor 2012?
this is because all my drawed part are already full constrained and I want to enlarge it to some factor?
I am creating a program to write out all the flat patterns of all sheet metal parts in an assy. I save it out as dxf. What I need is to totals of all the sheet metal parts across all sub assy’s etc in other words not “Structured” but “Parts Only” in Inventor BOM terms. All works fine but the only problem is that when a sub assy is a weldment or “inseparable”, it hides the parts inside it and “Parts only” BOM don’t make the internal parts of that sub available and the totals are not correct then. I need the totals because the idea is to write that into the file name including the thickness of the part.
View 9 Replies View RelatedI created view representations in my assembly, for example a column with k-polates and base plates, the column is a FG part, so now i create drawings and place views on that drawing, what i am askign for is I want to place the name of the view representation in my view label as a paramater so in the event i change my view names in my model they update in my drawing, this is important because i can create a cross referance to my 3D DWXF file views.
View 4 Replies View RelatedI would like to write a VBA macro which is able to find all of my inspection dimensions (rounded box in Inventor 11) and write some values into an excel sheet. Now, my problem is to identify the inspection dimension. I already looked into the API Object Model from Autodesk and into "all" properties of a drawing I created but I couldn't find them. I found the dimensions in the properties but no hint of an inspection flag.
View 5 Replies View RelatedI'm trying to get the value of the Category iproperty of the model on the active drawing sheet. This is not a problem in a single sheet drawing, but I'm not sure how to specifically retrieve the Referenced Document of the Active Sheet in s multi sheet drawing.
Here's what I have:
Option Explicit
Public Sub PartsListFilter()
'set reference to the drawing document
'assumes that a drawing is active
Dim oDraw As DrawingDocument
Set oDraw = ThisApplication.ActiveDocument
[code]........
are there any other analysis tools available to find the minimum internal wall thickness in a part? I'm aware of the cross-section tool, but that only analyzes an area the user has already noticed. In a prismatic part with several cross-holes and features (cavities), it could be easy to miss a thin spot that could give up under internal pressure just by 'eyeballing' the part with Hidden Edges turned on.
I guess I could try the 'unground and move the part thru a sectional plane' trick, but I think it would be too haphazard, especially if the weak point is not thru a principal plane.
Is there a tool I'm missing or maybe something that has been added in newer releases? Maybe this is too much analysis to ask of a modeling package.
Inventor Professional 2014 64 SP1
Windows 7 64 bit - SP1
Xeon E5-1620
16 GB Ram
Quadro 2000
I have a iLogic question about finding out if a View exits..
Lets say I have a drawing that I want to read the scale of a view.. All the snippets I have found is pointing to the name of the view like "VIEW1". But if I have deleted the first view I created it will give me an error..
So, is there ant possibility to check if the "VIEW1" exits without getting an error?