AutoCAD Inventor :: Different BOM Reference Structure In Same IAM Possible?
Jul 26, 2012
Let's say i want to draw a bike. In the 2D IDW of the wheel I want to see the frame as a reference. So, in the .iam of the wheel the frame subassembly is inserted and checked as reference. Also, a new level of detail is created that surpressed the frame.This level of detail is used in the overall assembly of the bike.
So, I end up with several subassembly's that contain other subassembly's just to reference them in the IDW. It would be better to have just one master assembly and create several IDW's from that assembly with different LOD and reference settings.
I have a user who has come across an issue I have not seen yet. The Occurrence BOM Structure is set to Default (Reference), and I can find no way to get Default (Normal) to appear. This is a new part in the assembly and is needed in the BOM and to show up as solid lines in the drawing.
I have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
I am labeling structures and need to use the station & offset for the street alignment not the alignment for the pipe network. It works great for the station but the offset is not working properly. It reads 0 as though it's reading the alignment for the pipe network. I've tried copying a label and adding reference text, creating a new label from scratch, putting 2 pieces of reference text in (1 for the station & 1 for the offset), and just doing the offset in the reference text instead of the station & offset...none of those have worked.
I have a road with storm drain and sanitary sewer. There are three alignments, one for the road centerline, one for the sanitary sewer and one for the storm drain. I would like to label the structures with the stationing from the alignment it's on but I would also like the label to include the road centerline station perpendicular to the structure.
Civil 3D 2012. One structure in my pipe network is not following along when the network is data-referenced in to other plan drawings. The structure is present in the source drawing, and included in the network, along with the pipes that are connected to it. All other structures and pipes are operating fine.
Attached is an image of one of the many Complex pipe structures that I am working on for steel fabrication (family), what I am trying to achieve.
I am creating these pipes using sweeps with reference lines at their centres, then I trace over them in 3D using pick path command when creating the extrusion. Is this a good way of doing it?
In trying to draw this particular element I have hit a problem. Drawing the curves that join the straights has become difficult as the straights don't align easily, and so I was wondering if there is a way of creating a reference plane by picking 3 points in 3d? This would be really, really useful!
The curve at the top left of the 'plan' joining the straights is difficult to draw as the straight on the left comes back at an angle and not perpendicular to say the rear vertical pipe work, which is drawn using another plane. I have managed to draw this so far by aligning it by eye, a dodgy way which is not really acceptable.
Found a way I think. A major part of the problem is that you cannot draw a reference plane in 3d! So after I have oriented to a plane perpendicular to the direction I want to draw, I then can draw an extrusion and then rotate the view in 3d and pick the face of the extrusion that aligns with the plane I want to draw on. A bit finicky really. Is there a better way?
We use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
One good thing about null structures is the way they display in 3D. They cover that gap in the pipe segments. Can I steal that shape? I am currently using a simple cylinder for water pipe "joints" and turning it off like most people do I think.
I have drawn a pipe network with multiple concentric sturctures. I need to make them all eccentric now. Is there an easy quick way to do this, or do I have to redraw all of them. When I go to the properties, I cannot find an option that allows me to change this.
How do I change the BOM structure of iParts from Normal to Purchased? The BOM editor in the assemblies that use the iParts have the iParts as read only. I can't find a way to change them to purchased from inside the iPart either.
I've copied over some hardware from the CC to our custom library... washers and bolts. How can I change the BOM structure of the parts to Phantom, I really don't want them showing up in parts lists... and I'd prefer not to just shut off the visibility at that level. They are all set to "Purchased"... can this be changed? I tried opening the part and setting the default to Phantom, but since it is a CC part, I get an error message.
I am working on an assembly and trying to build a BOM. I am using the BOM editor to change everything on the fly but I am running into an issue. For some reason there are a few parts that don't want me to change their BOM structure. I change them from "Normal" to "Purchased" but they instantly change back to "Normal". I have all the files checked out and in the parts document settings it's BOM structure is actually correctly labeled as "Purchased".
As a new Inventor user I wanted to get some insight and pointers on good practices for Project Files and their structure while using a stand alone Inventor seat with no Vault I am a single user at our company and just upgraded to Inventor. I have been using Solid Works for years and things are a little different.
I somehow accidently closed and deleted the left-side file panel(with the file three structure) in inventor 2011! And i cannot find where to activate it again in any of the menus.
I am using Inventor Professional 2012 and I have created complex iparts and iassemblies and I am not able to change the BOM structure of the parts simply because they are intelligent. I require the tables and features that the iparts and iassemblies can create but they are coming up read only and can not modify the BOM information. Is there a way to change the read only aspect of an ipart or iassembly?
I created a couple of Unistrut structural member and published them to the CC.
Once they were in the CC I setup the proper code allowing these members when placed in an assembly to show up as shown in the parts list.
Now sometimes when the member is an odd length it will show up with the decimal places in the part number (i.e. P1001--46.621) This is fine when it comes to the part number showing up as a decimal. In the description we are now wanting to show this in fractional form such that 46.621 in the part number shows up as 46-5/8 in the description.
When I edit the family table for these members, specifically the columns that house this coding, I am not seeing anywhere on how to change this. Does this can be done and if so what the coding is to accomplish this? Without changing the global units of the drawing?
I have been doing the design and shop drawings for lattice structures using AutoCad in 2D. It works fine but there are a few problems where parts collide in final assembly. My client suggests Inventor as he thinks it iwll be faster (and thus cheaper) and it would also automatically make shop drawings of each piece.
While I have no doubt it is possible to design and draw a lattice structure in Inventor, would it be efficient or would it be a waste of time compared to another program. Would 2D AutoCad be more efficient?
I am currently working with frame generator, and I have created a structure family of extruded aluminum profiles. I have a problem, and it's like to limit the length of the profiles up to 6 meters. When I insert the profile in a structure of 7 meters of length, Inventor should segment the profile in a profile of 6 meters + 1 profile 1 meter, as the maximum length of the profile should be 6 meters.
I'm working on a large infrastructure project with numerous of drawings. On quite a few layout drawings I need to have the same base set of references, however I need to change the layer settings (colors, lineweight etc.). This cannot be done in the base reference itself as it is used by others. As the layouts I work with includes other references as well, it is time consuming to filter and change layer settings on each base reference.
My concept is to have a master reference file to manage all layer settings and add/remove base references. When the master reference is referenced into the layout, all layer settings on the base references should stay as set in the master reference. In this way I can easily control all base references with one file and make sure all changes will be the same for all the layouts.
I have an assembly of parts that are on a stand thathas four (4) legs. If you were to distribute the load from CoG there will be vertical forces as well as moments on each pad that will support this assembly. Is there a way for Inventor to show the distribution of the CoG load on the given points?
I have a wall of frames, if you will, and some frames within this wall are different sizes. When doing the BOM, I want to be able to combine anything that has the same stock number as well as the same cut length. The only way I have thought to do this so far is to cycle through each stock number and if the cut length is the same, I override the quantity of one and change the BOM Structure of the other to "Reference".
How can I change the BOM Structure to reference without selecting the part or going through the BOM Editor? Is there some VBA code I could utilize? I am striking out by solely using iLogic.
I have an assembly with a subassembly in it. The subassemblies bom structure is set on Normal so that the subassembly number shows on the main assembly BOM and not the individual parts.
However when I place the parts list on the .idw of the main menu it keeps on selecting the parts structure for the BOM, I need it to select the structured view. How do I get it to select the structured view on the BOM so that the BOM does not show the individual parts of the subassembly?
I have made sure that the parts view on the BOM in the source assembly is disabled.
