I have a user who has come across an issue I have not seen yet. The Occurrence BOM Structure is set to Default (Reference), and I can find no way to get Default (Normal) to appear. This is a new part in the assembly and is needed in the BOM and to show up as solid lines in the drawing.
View 2 RepliesLet's say i want to draw a bike. In the 2D IDW of the wheel I want to see the frame as a reference. So, in the .iam of the wheel the frame subassembly is inserted and checked as reference. Also, a new level of detail is created that surpressed the frame.This level of detail is used in the overall assembly of the bike.
So, I end up with several subassembly's that contain other subassembly's just to reference them in the IDW. It would be better to have just one master assembly and create several IDW's from that assembly with different LOD and reference settings.
Inventor 2012 - 64 bit - build190 - Windows 7
I have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
It seems like this worked in the past?
In a IPartFactory is it possible to change the BOM Default structure per IPartMember?
View 5 Replies View RelatedHow, or if it is possible to change the default file location for a tube and pipe run?
I know that you can browse out and modify the file path on your initial save but is there any way to change the default?
Example of what the default is: (assembly part number = 123456)
location for Tube and Pipe runs: C:ProjectsDesign Files123456123456AIPTube and Pipe
location for Run File: C:ProjectsDesign Files123456123456AIPTube and PipeRun01
example of what I would like the default pathing to be:
location for Tube and Pipe runs: C:ProjectsDesign Files123456
location for Run File: C:ProjectsDesign Files123456
basically I would like to remove the sub folders so all files are saved in one folder location.
My company is using inventor routed systems 2010.
I made a flanged connection using I logic. Very simple Tube + Flange + Gasket + Blind flange + Bolting.Then I tried to write some ilogic rule to have Blind flange on / off when needed, hence the Gasket & Bolting also need to be off. Like in these images:
That works fine visually, but I also want the BOM to be set accordingly. For the Blind flange & Gasket my BOM is OK. But for my bolting the BOM is not OK. I tried to set the BOM structure the same way as the visibility but that failed. It only subtracted 1 bolt from my list (see code)
If Blindflange_status = 0 Then 'Bolting offComponent.InventorComponent("Bolting:1").BOMStructure = BOMStructureEnum.kReferenceBOMStructure 'Sets BOM Structure to Reference (Remove from BOM)Component.Visible("Bolting:1") = FalseElse 'Bolting onComponent.InventorComponent("Bolting:1").BOMStructure = BOMStructureEnum.kDefaultBOMStructure 'Sets BOM Structure to Reference (Remove from BOM)Component.Visible("Bolting:1") = TrueEnd If
Is there a way to set all parts within a pattern BOM structure? I made my bolting by adding 1 bolt, 1 washer & 1 nut and then pattern them using feature pattern select.
Inventor 2013
I made a flanged connection using I logic. Very simple Tube + Flange + Gasket + Blind flange + Bolting.
Then I tried to write some ilogic rule to have Blind flange on / off when needed, hence the Gasket & Bolting also need to be off. Like in these images:
That works fine visually, but I also want the BOM to be set accordingly. For the Blind flange & Gasket my BOM is OK. But for my bolting the BOM is not OK.
I tried to set the BOM structure the same way as the visibility but that failed. It only subtracted 1 bolt from my list (see code)
If Blindflange_status = 0 Then 'Bolting offComponent.InventorComponent("Bolting:1").BOMStructure = BOMStructureEnum.kReferenceBOMStructure 'Sets BOM Structure to Reference (Remove from BOM)Component.Visible("Bolting:1") = FalseElse 'Bolting onComponent.InventorComponent("Bolting:1").BOMStructure = BOMStructureEnum.kDefaultBOMStructure 'Sets BOM Structure to Reference (Remove from BOM)Component.Visible("Bolting:1") = TrueEnd If
Is there a way to set all parts within a pattern BOM structure?
I made my bolting by adding 1 bolt, 1 washer & 1 nut and then pattern them using feature pattern select. Inventor 2013
I was looking for some iLogic Code for Inventor 2013 that would cycle through all the parts in an assembly grabbing the quantity of each part and setting it equal to the custom property "Qty" of each part.
Having a little trouble creating the for each loop and setting reference to each part without referencing each part by specific name.
I am labeling structures and need to use the station & offset for the street alignment not the alignment for the pipe network. It works great for the station but the offset is not working properly. It reads 0 as though it's reading the alignment for the pipe network. I've tried copying a label and adding reference text, creating a new label from scratch, putting 2 pieces of reference text in (1 for the station & 1 for the offset), and just doing the offset in the reference text instead of the station & offset...none of those have worked.
View 5 Replies View RelatedI have a road with storm drain and sanitary sewer. There are three alignments, one for the road centerline, one for the sanitary sewer and one for the storm drain. I would like to label the structures with the stationing from the alignment it's on but I would also like the label to include the road centerline station perpendicular to the structure.
Something like this:
SS-MH #4
Sta. 10+00
=Road Sta. xx+xx
Civil 3D 2012. One structure in my pipe network is not following along when the network is data-referenced in to other plan drawings. The structure is present in the source drawing, and included in the network, along with the pipes that are connected to it. All other structures and pipes are operating fine.
View 3 Replies View RelatedI am create the stron network. I want structure profile elevation. How to create expression in structure reference alignment profile elevation.
View 9 Replies View RelatedAttached is an image of one of the many Complex pipe structures that I am working on for steel fabrication (family), what I am trying to achieve.
I am creating these pipes using sweeps with reference lines at their centres, then I trace over them in 3D using pick path command when creating the extrusion. Is this a good way of doing it?
In trying to draw this particular element I have hit a problem. Drawing the curves that join the straights has become difficult as the straights don't align easily, and so I was wondering if there is a way of creating a reference plane by picking 3 points in 3d? This would be really, really useful!
The curve at the top left of the 'plan' joining the straights is difficult to draw as the straight on the left comes back at an angle and not perpendicular to say the rear vertical pipe work, which is drawn using another plane. I have managed to draw this so far by aligning it by eye, a dodgy way which is not really acceptable.
Found a way I think. A major part of the problem is that you cannot draw a reference plane in 3d! So after I have oriented to a plane perpendicular to the direction I want to draw, I then can draw an extrusion and then rotate the view in 3d and pick the face of the extrusion that aligns with the plane I want to draw on. A bit finicky really. Is there a better way?
I have used the align to plane in 3d
Using Revit 2012
The Transform Reference point indicator in the options bar is set by default to the center point. I need for it to be upper left, but am having to manually change it with each use. How can I change the default setting on this?
View 6 Replies View RelatedScreenshot provided where you can manually change it on an object, but I would like to change it so that the Top Left is selected by default. I'm a web developer, and just like the web all my designs origins are anchored to the top left.
View 2 Replies View RelatedWe use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
Here is what the file looks like:
<ColumnConstList desc="Inner Structure Diameter" dataType="float" unit="mm" name="SID" id="CCL1" visible="1" context="StructInnerDiameter" index="0">
<Item id="i0">1200.0000</Item>
<Item id="i1">1350.0000</Item>
<Item id="i2">1500.0000</Item>
<Item id="i3">1800.0000</Item>
<Item id="i4">2050.0000</Item>
<Item id="i5">2300.0000</Item>
<Item id="i6">2550.0000</Item>
I tried modifying the last line replacing 2550 with 3600.
I also tried adding a line <Item id="i7">3600.0000</Item>
I saved the XML file and restarted the program with nothing changing that I can see.
Looking for correct file(s) to edit so I can modify the LISTS that come up in the piping modules.
One good thing about null structures is the way they display in 3D. They cover that gap in the pipe segments. Can I steal that shape?
I am currently using a simple cylinder for water pipe "joints" and turning it off like most people do I think.
I have drawn a pipe network with multiple concentric sturctures. I need to make them all eccentric now. Is there an easy quick way to do this, or do I have to redraw all of them. When I go to the properties, I cannot find an option that allows me to change this.
View 2 Replies View RelatedI want to make popup the i properties windows to fill or change in 2 ways:
» when creating a new ipt, iam and idw
» just before saving all 3
the properties I want to validate are
- the title not filled
- if there is more than one line filled in comments
I am opening, using VBA, the iProperties "Pop Up" box, using the following code....
ThisApplication.CommandManager.ControlDefinitions.Item("AppiPropertiesWrapperCmd").Execute
If it is possible to open the iProperties "Pop Up" box at a specific Tab, for example, "Physical" or "Status" etc?
Is there any way to add an "iProperties" item to the context menu in the drawing environment, so that I can select a part on the drawing and access its iProperties, instead of having to "Open, edit iProp, Close," for each individual part? - Using Autodesk Inventor Professional 2012
View 2 Replies View RelatedAny way of having 2 files with different file name but identical designs what automatic updates the other one?
I need the same valve design with different materials, stock number and part names but I would like to make sure that both files are always updated to latest rev. Without having to remember to do it my self every time.
We are using vault?
Is it possible to create a new TAB in the standard iProperties dialogue box for Inventor Models and Drawings? I want a completely new TAB to hold unique company information fields without having to create Custom Property fields.
View 2 Replies View RelatedWhile in assembly, i would like to select a subpart and be able to clear or delete the value of ex description without opening the part file.
I can delete properties in custom prop but i cant do it in description....
I've use design tracking properties but to no avail....
In the past we filled in our changes, we did on the part, in the iProperties of the IDW. In the IDW we use some Custom iProperties for this. That's not usefull because you want this data in the 3D-model. Now I have written some code to automate this, which works really great. This code works in the IPT as well as the IDW. But what I want to achieve is: When my IPT is the active document, I want to read out the iProperties from the IDW to check if there is already filled some of these properties, because I have to deal with 'old' documents as well.
So my basis question is: How can I read out iProperties from an IDW into the IPT. I have found lots of solutions which go the opposite direction, IPT -> IDW. I want IDW -> IPT.
I want to get out the Area in Physical Tab in i Properties, after that, I will show it out in drawing by add general notes
This is my program:
[code]
.....................
Dim oBlockPart As PartDocument
oBlockPart = mApp.ActiveEditDocument
..................
Dim oGeneralNotes As GeneralNotes
I need to add a "Gauge" value to show up in the iProperties dialog box under the Project tab, but I don't know how or if I can.
View 9 Replies View RelatedI am now looking to work with custom iProperties that will populate our company's new BOM standard. I have not done much with regards to customizing a BOM (I've always used the generic fields). Now my boss has come to me and wants to use the following headings for our BOM....
REF ID, QTY. , DESCRIPTION, SHAPE, SIZE, LENGTH, MASS, TOTAL LENGTH, TOTAL MASS, COMMENTS, REF. DWG.
REV., REV. DATE
While I understand some of these fields will require the user to manually type information in (Comments and Ref. Dwg.) The others, from my understanding, can come straight from iProperties or Parameters. I am running INV Pro 2013.
i would like to be able to make a change in iProperties ( part #, description, stock number), and then automate/sync that change to the .idw of that part/project after the .idw is created.
is this possible? do i just need to fill out the iProperties BEFORE i make the .idw,
I really hope this is possible, we are going back and reorganizing all of our previous work and putting everything in vault now.
Sometimes I change the dimensions of a material I use but then I have to open Iproperties and change the description by hand. This can create problems as you can understand especially when I forget to update the Iproperties.
Then I had the thought to automate it. Lets take a steel bar as example. I have thickness and width as parameter, both are exported and available under IProperties/Custom. But they show as 200 mm and 10 mm. I would like to loose the units. I tried also UL but then it reads 200 ul and 10 ul.
What I like to get are just the numbers, no units. I like to use it to create this "steel bar 200x10" where the 200 and the 10 are linked to the Parameter and will change when I change the dimensions av the steel bar.
How can I get the "Location" iProperty using Inventors VBA?
Please see the attached picture!
I am using the following code to get other iProperties, thus.....
Set oStockNumberProperty = oCompDef.Document.PropertySets.Item("Design Tracking Properties").Item("Stock Number")
StockNumber = Trim(oStockNumberProperty.Value)
This works OK.