One of our employees installed new demo version of Inventor 2012 on my computer and it made a lot of mess as I am running 2009 as well. The whole system got confused so I decided to delete all 2012 inventor related programs in the control panel however I cannot run the design assistant now. When I click on the design assistant it pops up and disappears.
View 3 RepliesI just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....
View 2 Replies View RelatedI am using Design Assitant to rename files, but have had no luck with other referenced files.I have followed the Procedures from AutoDesk WikiHelp.
1. Open Top Assembly.
2. In the top browser, I select the part and set Action -> Rename.
3. Rename File.
4. In the bottom browser, I select the file types for additional referenced files.
5. I select (highlight) all the files.
6. Click "SAVE"
When I go to open the files, to check if the changes have been made, obviously to rename works on the Top Assembly,BUT for other additional referenced files, it doesn't.
I am doing this in a Single User Project.Just wondering if there are other steps that need to be done to use Design Assistant properly.
I cannot find why Design Assistant dont want me to use the replace command. i attached a picture.I have a 30 pages idw and i just need to replace one thing in it. I don't believe I need to redo the whole thing just for fews differents dimensions..
View 3 Replies View Relatedi wanna use a existent project to make a new one, i copy all the files that I need to a new project, then I use Design Assistant to rename all files, everything works fine this way. I just saw now a little 'problem' that doesn't bother me, but can be a problem to other ppl who open this project and see the difference.
When I rename the file name from Design Assistant (opening it from the top assembly), all the parts get its PART NUMBER updated and all the files are renamed too, but...when i open the assembly, in the Model tree, no parts have the name updated, all keeps the old name, but if i open the part from the model tree, i open the correct part already updated and renamed, so, its just the model tree displays name that are incorrect. Is that known ? Is there a solution ? Or am I doing something wrong to copy or rename files ?
I realized that is happens most when i rename files from a top assembly with subassemblies. Sometimes when i use just one assemblie with just parts inside it, everything goes normal.
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
when I'm in a part file and attempting to open the related drawing file by right clicking on the part name at the top of the design tree, the drawing can't be found automatically and I've to find it in the file open dialogue box.
View 2 Replies View RelatedI have a Parasolid file that opens in Inventor 2012 but not in Inventor 2013.In 2013 i only have a blank screen.I have zipped the file.
View 1 Replies View RelatedIt started about 3 or 4 weeks ago on my office workstation with Inventor 2013 Pro. Seems to still go okay at home with 2014. I'm using Inventor's built-in PDF export, not an external program.
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013 Certified Professional
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
I have recently build a frame structure using the frame generator. Now i wish to change some beams to other positions which is fairly easy. The only problem i have is when I click on the insert frame button the selection window does not appear. the function does work but it is like working in the dark
How to open the insert frame window manually?
I used to paste parts all the time while the constraints tool was open which made for a good work flow when I had to insert a lot of the same part. I just updated to SP1 and whenever I paste a part the constraint tool closes now.
How to use the ability to paste parts while constraining?
When press "open" the "open"-window dosn't open. Insted it open a comandpromt by the cursor that promt me to enter full search-way and name on the file I want to open.
What can i do to get the "open"-window?
I wanted to use the program to design a robot for our school vex competition. Vex has provided cad files for all the parts. So, how i can import the seperate parts into one design. I can only open each part individually but cant find a way to combine them so can assemble the robot in one design.
View 2 Replies View Relatedwhy the design center does not show up when the command is executed !!
View 1 Replies View Relatedwhen i pick design center from the ribbon nothing happens. Even if i type in adcenter nothing happens.
View 2 Replies View RelatedHow do I open the Design Centre and see "blocks" that are bound xref with $0$ in the name, unless the bindtype is set to insert.
I'm not a monster, I just look like one.
how can i use civil 3d to design an open channel?
View 3 Replies View RelatedWhen I am designing a picture in Photoshop Elements 10, what I design on the screen doesn't print out the same way. The printed version is slightly cutting off around all edges. I have only started encountering this problem a couple of months ago. It's very frustrating. I know it's not a driver issue and I am formatting the same way and using the same printing methods as I always have.
View 2 Replies View RelatedIs there any way to open or convert Design Cadd files to be useable in vrs 2012 ?
View 4 Replies View RelatedWhy doesn't the filmstrip open when I attempt to open multiple photos in camera row? I'm using CS4.
View 4 Replies View RelatedSince upgrading to AutoCAD LT 2011 I cannot use the Design Center for inheriting objects such as layers, blocks etc between drawings. I have a few different drawings open which are displayed in the tree view of the 'open drawings' tab in the Design Center. But the objects of the drawings are not displyed. No +-sign in front of the drawing name, no icons in the icon field, just a summary at thebottom saying '0-items'.
I have tried reinstalling AutoCAD.
Windows Explorer set to open image files with PSE11, but when I double click on image in WE it launches PSE11, but I then need to click on Open tab in PSE11 to get it into work window. PSE10 did not have this problem
View 1 Replies View RelatedI have recently upgraded from corel 12 to X6. I work in SignLab e6 on my production computer. Now since I have upgraded when I export files from x6 and import them into SignLab e6 they will not import unless I change everything to 1 color. If it does export the file as full color, when I import the file it is converted to 1 color. This takes a lot of time to re color everything. I typically have to export files from Corel as .EPS in order for the file to import into Signlab with best quality, but have been using the CMX (legacy) lately with same results. I dont understand why I have to convert them into 1 color nor why they convert from full color to 1 color.
View 10 Replies View RelatedMonths ago I downloaded photoshop CS5 by means the assistant.The 1st downloaded file came in corrupted and the 2nd attempt was not different. Both did not run. On that time I employed to download a 3G modem.
People from the support in the forum advised me not to download the files through 3G.Today I downloaded CS6 by means a fast ADSL connection , employing the Adobe Download Assistant.the downloaded finished I ran the installation, which ran normally .
Then as I attempted to start CS6 it crashed.I ask you whether there is any trouble with the setup available to download?
I have the Adobe Watercolor Assistant extension showing as installed in Extension Manager CC. However, it does not show up in my Photoshop CC Extensions. I have quit and restarted PS CC several times. And I have restarted my computer. Nothing works. I am running Mac OS X 10.8.4.
View 1 Replies View RelatedThe file autocad 2010 (dwg) that I've been working for ages doesn't open. It starts loading but then get stuk on 96%. I tried to recover it and no errors are detected.
View 9 Replies View Relatedif i try and to open a new file or save as a current file, the windows box does not open. the command line does populate asking for file name, etc, but obviously is very tedious to navigate windows folders with a command line!
any obvious changes that would prevent windows folder dialogue box not to open?
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
Like Recovery Assistant, Crossover, Face Time, and some others. So watch out.
View 3 Replies View RelatedI am difficulty getting the options dialog box to open (under the file menu "red A" dropdown list, options button). When I click on it, all of the buttons on top go gray and nothing appears. When I click on the black workspace, I get a compluter bell sound.
What I've tried to do to solve the problem is restart the computer and shutdown the computer.
Is there an option or a a way to keep the search window (CTRL+F) visible in Visual Studio Express 2012?
View 4 Replies View Related