I have the Adobe Watercolor Assistant extension showing as installed in Extension Manager CC. However, it does not show up in my Photoshop CC Extensions. I have quit and restarted PS CC several times. And I have restarted my computer. Nothing works. I am running Mac OS X 10.8.4.
View 1 Replies
Months ago I downloaded photoshop CS5 by means the assistant.The 1st downloaded file came in corrupted and the 2nd attempt was not different. Both did not run. On that time I employed to download a 3G modem.
People from the support in the forum advised me not to download the files through 3G.Today I downloaded CS6 by means a fast ADSL connection , employing the Adobe Download Assistant.the downloaded finished I ran the installation, which ran normally .
Then as I attempted to start CS6 it crashed.I ask you whether there is any trouble with the setup available to download?
I just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....
View 2 Replies View RelatedThis afternoon, from Photoshop CS6, I purchased and extension through Adobe extension drop down menu called EDGE FX. It will not install. As I attempt to do so, it does not list the Photoshop product (only Illustrator, Flash, Premiere, etc).
Here are some screen shots of the dialog boxes I copied. How do I manage to get this downloaded into Photoshop? Note in the last of the three screenshots, Photoshop doesn't appear as an option. I went into manager and a drop down menu doesn't give that option either. However, the description of the extension describes it as a tool to add interesting boarders to photos. Therefore, it must be a Photoshop extension.
My adobe bridge can't read NEF extension
View 2 Replies View RelatedI am trying to install a plug-in from PSKiss to Photoshop CS5 (version 12.0.4). I'm using Adobe Extension Manager CS5.5, and I'm running Windows 7 on my laptop.
Although I'm following up with PSKiss to see if there's a problem at this end, I also see an issue with Adobe Extension Manager. When I open it, the Install button is grayed-out. I can see neither of the plug-ins I've already installed in Photoshop, nor can I install anything new. I am running Adobe Extension Manager as Administrator.
Also, yes, I'm using my laptop with an Administrator account.
Adobe extension manager CS5.5 can not recognise my Photoshop cs ver. 12.0.4
View 2 Replies View RelatedHow to install the Dr Brown and Watermark installer scripts via Adobe Extension Manager? I am running Win7 and CS 4, and have opened CS 4 as an admin. Still, no luck.
when trying to install the Dr Brown services, I get "You do not have the appropriate permissions required to perform this operation. Contact your system administrator to obtain permission."
For the Watermark script, i get "Can't create folder 'C:Program Files AdobeAdobe Photoshop CS4 (64 Bit)Plug-InsPanelsWatermark'. I created that folder manually via Explorer but that didn't work.
How do I get media encoder to export a H264 with a .mov extenstion rather than a .mp4 extension?
Mac OS 10.8.5
Media Encoder 7.2.0
I've just installed Extension Manager Update 6.0.5.9 yesterday and today I've get a wired problem with my bambo tablet.I've used this tablet for 3-4 years without problem. The problem I've now is when I drag lasso tool on an image to make selection it doesn't make a selection even it is showed in the history state that I've used lasso,or magnetic lasso.
My machine is a Mac Pro 2010,Quad-Core Intel Xeon running on Lion 10.7.5 and my bamboo driver is the latest version 5.3.2-2. Even now I've change to use freeform path I've still cannot change form path to selection.
No matter what I do, the file extension names (i.e. jpg) show up in the contact sheet. eliminate them? I'm creating a grid for a gallery show and having the filename extensions added to the title of each image is cheesy.
View 3 Replies View RelatedI just updated to Lightroom 3.2 this week. It worked fine the past few days. Then last night, it started kind slow, then showed images shown in Library grid/strip view for any images. But it still show meta data. And no images in Develop tab. But if I move the mouse on the image area, the RGB values in histogram (upper right) still changes with differnt values. Just no images. And it still shows the shooting data.
I reinstalled it twice and oit still behave the same.
Then I build a new catalog. I see images only in the pre-import screen. Once a folder is imported, no images in this new catalog.
I also tried to clear cache, removed preferrance, and then create a new catalog. When I tried to import my images, there is a little triangle showing on top of each image, clicked and it said" Lightroom has some difficulty import the image file".
But PS CS5 Bridge and PS CS5 works just fine. I can actually right click on a grid (even though not seeing the real image or preview) and edit in PSP CS5.
BTW, the day before yesterday's problem, I was watchng the new Lightroom tutorial from this site (which I bought) and adjusted preference,... I don't know whether such a change of setting may cause Lightroom having difficulty seeing images.
I have CS6 now. Is there a setting that will change my photos to look like watercolors? As it has liquify, fragment etc.
View 7 Replies View Relatedi am going to college right now and i have a Photoshop CS class. On the begining of the course teacher asked if anyone else has anything to show her. I said that i have some works to show, she was really excited to see it first, but when she saw it, her smile left her face and so on she doesnt even wants to talk to me.
View 8 Replies View RelatedLike Recovery Assistant, Crossover, Face Time, and some others. So watch out.
View 3 Replies View RelatedI'm learning how to create extension (flex - extension builder) for Illustrator and how to make it communicate with a plugin.
The samples provided in the SDK detailed how to load /unload extension from a menu item from Illustrator, and how to add / remove EventListeners to make the magic happen.
to sum up, this is something like that:
1- click on the menu item
2- load extension
3- add listeners
4- do your stuff......
5- remove listeners
6- unload extension
Basically my plugin is a module/service which is in charge of dealing with / modifying artwork tree. It has no User Interface.
My extension will have a user of this service.
What I would like to do is to load my extension as soon as my plugin is loaded, and unload the extension when the plugin will be unloaded.
Or notify when extension is loaded or unloaded.
Is that possible and hw could I achieve that?
I have original watercolors that I have scanned but need to edit and work with in InDesign. I am getting a gray shadow or hue in the "white" areas between the color. I've tried everything I can think of to remove the gray cast but it seems to be messing with the original color and hue. I've tried scanning at 2400, messing with the contrast, shadow and highlights, curves etc, after 3 days nothing seems to work.
View 3 Replies View RelatedIs there a plugin out there that does the following effect :
Seems like it would be simple enough to create manually (albeit require some time), but even more simple to automate through a 1-click plugin, if it's out there.
My sister has some drawings that she want to scan and send to me. They use very thin pen ink. She then wants the pen strokes to be colorized and turned into water color strokes.As an experiment I tried using the "Artistic-Watercolor" filter on some thin lines and the results were lame.
All of the watercolor brushes I have seen online seem for comparatively wide stokes.Is there a filter or action that could turn very thin ink stokes into realistic looking watercolor strokes?
i sketch a people face with pencil tools, create another color layer to color the face.
I use a paint brush to paint the face on that color layer, but when i try to apply water color filter the face color turn black color.
Does it mean a single color won't do in a filter effect? even it doesn't work, the color should be remained instead the black color,
One of our employees installed new demo version of Inventor 2012 on my computer and it made a lot of mess as I am running 2009 as well. The whole system got confused so I decided to delete all 2012 inventor related programs in the control panel however I cannot run the design assistant now. When I click on the design assistant it pops up and disappears.
View 3 Replies View RelatedI am using Design Assitant to rename files, but have had no luck with other referenced files.I have followed the Procedures from AutoDesk WikiHelp.
1. Open Top Assembly.
2. In the top browser, I select the part and set Action -> Rename.
3. Rename File.
4. In the bottom browser, I select the file types for additional referenced files.
5. I select (highlight) all the files.
6. Click "SAVE"
When I go to open the files, to check if the changes have been made, obviously to rename works on the Top Assembly,BUT for other additional referenced files, it doesn't.
I am doing this in a Single User Project.Just wondering if there are other steps that need to be done to use Design Assistant properly.
I cannot find why Design Assistant dont want me to use the replace command. i attached a picture.I have a 30 pages idw and i just need to replace one thing in it. I don't believe I need to redo the whole thing just for fews differents dimensions..
View 3 Replies View Relatedi wanna use a existent project to make a new one, i copy all the files that I need to a new project, then I use Design Assistant to rename all files, everything works fine this way. I just saw now a little 'problem' that doesn't bother me, but can be a problem to other ppl who open this project and see the difference.
When I rename the file name from Design Assistant (opening it from the top assembly), all the parts get its PART NUMBER updated and all the files are renamed too, but...when i open the assembly, in the Model tree, no parts have the name updated, all keeps the old name, but if i open the part from the model tree, i open the correct part already updated and renamed, so, its just the model tree displays name that are incorrect. Is that known ? Is there a solution ? Or am I doing something wrong to copy or rename files ?
I realized that is happens most when i rename files from a top assembly with subassemblies. Sometimes when i use just one assemblie with just parts inside it, everything goes normal.
I am working on the image here attached. In particular, i would like to clean it, removing that little grey spots and stains in the central white area, and if possible i would like to refine, make more regular the borders of the black lines.
View 1 Replies View RelatedAre there any watercolor effect plugins or plugins that aid in the water coloring process? I looked in the Plugin Index and searched multiple times but it turned up nothing.
View 6 Replies View RelatedCan you make a Pen Tool path (white), and then, by using the Brush Tool, color it in automatically ONLY within the path's designated area?
Having the ability to do this would enable me to create "digital watercolor" images with texture. I would take the white paths, and then select a color and use the Opacity Tool to make the colors look like watercolor paint by using the Brush Tool. The issue is: can I make a color texture in any path?
filter to apply that gives a watercolor effect such as can be made to work in PS Elements. I really like the way Elements handles it but would prefer to do it all in PSP. Are there such things a plugins for PSP that would work like that?
View 13 Replies View Relatedrecommend a watercolor plugin for PSP X4?
View 3 Replies View RelatedI am creating a canoeing map for my daughters. I want to change the map from this...
into something that looks more like this...
Specifically, is there a Live Paint Bucket effect that can mimic the blue watercolor border in the antique map?
I'm using Inventor 2011 and I can't figure out how to set my dimension settings so it breaks the dimension extension lines automatically when crossing over other dimension extension lines. I saw that others say it just happens, but it is not "just happening" for me. how to set my dimensions so when dimension lines cross each other one of them automatically breaks?
View 9 Replies View Related
