I modeled a sheetmetal part, saved it and then did a save as to make a similar part. I changed a couple dimensions and when it updated it chnaged it's orientation. Playing with the EOP marker reveals the refold feature, the last feature in the model, to be the culprit. I tried reentering the stationary reference, and I tried deleting and recreating the feature.
View 1 RepliesI'm having an issue with some similar pieces of sheet metal. They are created with a face, then I place a fold, then I need to unfold/refold it so I can place holes while it's unfolded and have them remain as true holes.
2 of the 3 parts do this just fine, but one particular will unfold normally, but the refold, even though it succeeds, does not actually do any refolding, I'm just left with the flattened part.
Every sketch is fully constrained. I've experimented with changing the sheet metal rules.
I have a conical shaped part that Inventor 2012 will allow me to unfold, but will not refold accurately. When the refold is complete it should roll back up and be .01 degrees from completely round. But instead it leaves about 60deg of opening. I need to cut out 120+ slots out of the face of the metal, but once I do this while in the unfolded state, it will not refold at all...not that it owuld matter if it, seeing as though it refold inaccurately.
View 4 Replies View RelatedWe're seeing strange behavior on all of our workstations when using a Refold feature on a sheet metal cone. Surfaces are (very incorrectly) being added at the top and bottom openings of the cone when the Refold feature is added. The behaviour is the same whether using Contour Roll or Revolve. The surfaces dissappear when the cone is revolved to a lesser degree, such as 200 degrees instead of 359. The cone can be revolved to 360 degrees and ripped but that raises a whole nother problem because Inventor does not correctly refold a 360 ripped cone. File attached. By the way, the surface artifacts show up in the flat pattern as well.
Inventor 2012 SP2
Vault Collaboration 2013 SP1
Dell Precision T3500, Xeon W3503 2.4GHz, AMD FirePro V4900
Windows 7 64-bit, 8 GB RAM
Automation of the sheet metal bending parts unfold /refold in vb.net for Inventor 2013.
I want to unfold the part with selecting the one of the face as stationary face and further selecting the bend/ bends with reference to face in vb.net
For refold, I have to select the stationary reference automatically , based on some criteria, and further to select the single and multiple bends by using API.
Also, I want to find the bends and faces relationship i.e.
How to find the bend associated with number of faces, how to find face entity using internal name ;
The code I tried I am attaching here for your reference.
trying to move a picture and I get "could not complete the Move command because the result would be too big". It is the only layer.
View 2 Replies View RelatedAutoCAD Inventor Suite 2010
64-Bit Edition - Build 260 - SP2
Intel Core 2 Duo - E8400 @ 3.00GHz
8 GB - Ram
64-Bit - Windows 7
why my Inventor Keeps crashing when I am inserting a Parts List into a Drawing for my assembly.
It has been happening more frequently now, and I already installed Service Pack 2. The above is my computer information.
I have a function programmed in vb.net that controls the opacity of parts in the active view. If the user is selecting objects and then starting the program the "non-Selected" Parts are disapearing step by step.
That's looking very interesting, but doesn't supports the user . Is it possible to freeze the active view of inventor and refresh it, when the job is done? So the user will only see the result of the process and not the working process.
As you could already read in the headline of this topic, I'm getting two diffrent results from Inventor.File.ReferencedFileDescriptor with the Inventor 2010 API and Inventor 2012 API when I'm trying to get some information from the same Inventor file!
In my case the FullFileName and therefore the ReferenceMissing property get's me different values, although it's exactly the same Inventor file and exactly the same source code.
How could this happen? Any changes for the ReferenceFileDescriptors object from API 2010 to 2012?
I don't get it....
I have 3 iLogic Rules that I use with my idw's,
1-SCALE - is to update scale in the title block
2- WEIGHT - is to update weight of model in title block
3- PDF - is to create a pdf version of drawing in same location as idw
all are triggered by saving the drawing.
These work fine, but sometimes when I create specific types of drawings there is errors, which is no big deal, just a prompt appears and I press ok and everything is fine.
With very little to no iLogic programming knowledge, is there a way to edit to rules so that if there is an issue, the rule knows it is ok and saves without the little prompt appearing?
Example of when errors occur for:
SCALE - sometimes I create drawings on my template just using create sketch, I don't place a base view so therefore there is no model information. which makes it hard to produce a scale. (see image, error -1)
WEIGHT - occurs during the same instance as above, only a sketch is saved on the idw. (see image error -2)
but I also have an error occur when creating a drawing from a presentation file. I create a presentation file from a specific level of detail from an assembly. and I get an error when saving . (see image error-3)
I understand the first 2 errors because there is no physical data to get this information from, so I am hoping an edit to the rules can bypass this issue. But the 3rd error doesn't make sense. It is from an actual model, but I guess the physical properties get lost from an .iam to .ipn?? or is there a setting that can be toggled to carry over model properties?
Inventor Pro 2013
Rules are below:
'Scale
Public Sub Main()
On Error Resume Next
'Get the drawing document
[Code]....
Why my result from stress analysis isn't symmetry?I am modeling a telescope support system. The result I got from the analysis always not symmetry, the difference is very small therefore I think the test setting shouldn't have any major problem.
The difference could be cause by the round off during the simulation, if I am right about it, is there anyway to improve the result?
I can get length, width, height information from part or assembly below Visual Basic Express 2010 code.
Everything is perfect. But if any plan or axis visible in document than results comes wrong! I think box object calculating the dimensions not only according to raw part. It adding the axis or plan dimensions to the result!...
Dim invDoc As Document
invDoc = Form1.invDocumentTakas
Dim dLength As Double
Dim dWidth As Double
Dim dHeight As Double
[code]....
After simulation the result won't show colors in the part.Is this a bug ?
Autodesk Design Suite ultimate 2013
I am almost sure this is not possible in AI but I will ask it anyway:
is it possible to assign value of parameter as a result of non linear equation?
for example I would need parameter x to meet the equation
cos^2x+Ax+C=0
where A and C can be other fixed parameters.
Whenever I try and extrude or emboss my buisness Logo I get the error "The attempted operation did not produce a meaningful result"
I have attached file.
I'm experiencing many problems when modifying parts measures, adding extruxions or doing holes/threads.
Always same error: Operation doesn't produce a significant result. Redefine inputs
If Inventor is totally closed and reopened, I can modify and update parts without problems for 10-30 minutes, until first error, then it gives errors until closing again. Usually, but not always, operation preview begins to fail before first error. So it's quite difficult to reproduce.
I've tried uninstalling everything after Autodesk installation, windows updates and Firefox plugins (well, even Firefox itself) included. I've tried all hotfixes and updates that Inventor 2013 gives (NO SP1), even I've fully reinstalled Inventor. I've been using Inventor from Inventor 7 and never seen such errors.
I've attached a part from the pictures. Anyway, as errors are not always happening, maybe you won't have any problem with it.
PD: Also, a little problem is that with this Inventor version I can use the CTR+c CTRL+v to copy parts into an assembly. I can use the context menu but no shortkeys.
Autodesk Product Design Suite Premium 2013 (Installed yesterday, so with all official updates)
Windows 7 64bits Proffesional SP1
Intel(R) Xeon CPU W3565 @3.20GHz
NVIDIA Quadro FX 3800
8GB RAM
In AutoCAD for Architecture 2010 I am having problems publishing to a DWF (DWF6 ePlot.pc3) as well as to a PDF (DWG To PDF.pc3). On one machine everything works fine. On another machine it has worked but doesn't now.
I have tried the following:
Repaired AutoCAD for Architecture
Reinstalled AutoCAD for Architecture
Recreated both .pc3 files
Numerous reboots and restarts
The only difference is that the machine it doesn't work on has AutoCAD for Architecture 2009 installed. Both machines are XP64 SP2 with identical hardware.
Same hatch properties but different result! How come?
In the screenshots below, I got a hatch of the same properties, but the output in the screen is different!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I would like AMAP to perform a BUFFER operation on a certain SHP, so the resulting buffer polygons would get the table attributes from that original shape, and also be exported as a SHP.
It is mandatory that a buffer polygon will have the same attributes from the original SHP line, including its FeatID.
Is it possible?
I am using jig to get orientation angle of a block reference by below steps.
Dim rot As RotateBlockJig = New RotateBlockJig(br, ucsRot) Autodesk.AutoCAD.Internal.Utils.SetFocusToDwgView()Dim pr As PromptResult = ed.Drag(rot)
How to find whether the return angle value is by
i) 'mouse click on drawing area'
or
ii) 'keyboard entry on command prompt'?
I have a simple rectangle 17.619units x 1.499units = 26.41units². The units are supposed to be meters.
Why does the area function (Home, Utilities, Measure, Area) give a result of 423.3422? I don’t know what units this is in.
I have tried this on several rectangles and all come out with a strange result.
This is a drawing I have inherited. When I do the same thing in a new drawing or one of my own drawings the result is correct.
When I create a project mit chapter and and want burn it in Blue-Ray disc, than comes error 5:0:0. Without chapter I can project burning perfect.Already destroyed many Blue-ray discs.
View 12 Replies View Relatedmy CS2 shuts down when I try to open a raw file and sometimes in the middle of editing an image without warning and without saving any changes. I purchased a new Dell computer hoping it would solve the problem but it didn't. It's still happening with this new $6000.00 computer running Windows XP Pro. Is this a known issue and would an upgrade to CS3 resolve this matter?
View 1 Replies View Relatedover and over i keep hitting this wall when stitching my edges together while unwrapping - what this is or how to fix it?
View 2 Replies View RelatedI have some issue in Trim command,.
(Please see the attached picture before read the below steps,.)
generally, I use trim command like this,.
Command: tr (enter) (enter)
select object: (I will select object which I need to trim)
it gave the results shown in the picture named "Earlier result"
But now I am getting differently like "current result"
But Earlier result is comfortable for me,.
Is this because of setting problem?
I'm taking over some code from a developer that is no longer here. Right now when the code saved a resultbuffer object to xdata, I get an eregappidnotfound. Due to various forums, I believe this is because the ID is not being registered with the database before it's being inserted.
The error is thrown on this line: XData.ToXData(partCollection);
using (Autodesk.AutoCAD.DatabaseServices.DBObject dbObj = t.GetObject(objId, Autodesk.AutoCAD.DatabaseServices.OpenMode.ForWrite)){ DeviceName.SetDeviceName((Autodesk.AutoCAD.DatabaseServices.BlockReference)dbObj, txtDeviceName.Text);
dbObj.XData = XData.ToXData(partCollection); t.Commit();}
The code for the ToXData function is here:
public static ResultBuffer ToXData(PartCollection Parts) { //Write out some header information ResultBuffer rb = new ResultBuffer(new TypedValue(System.Convert.ToInt32(DxfCode.ExtendedDataRegAppName), XDATA_APP_NAME), new TypedValue(System.Convert.ToInt32(DxfCode.ExtendedDataInteger16), XDATA_TYPE), new [code].......
Is there any possible way to enter a G Code into AutoCAD to end with the result of a 2D drawing of what my CNC has made? I have the code from the machine, and am not sure how to input it into the program to draw the face the CNC has cut out.
View 9 Replies View RelatedUsing Mac 10.7.4 and CS5 Extended on an Imac 27.Today, working on a large file PSD suffix and Photoshop froze. and when I restarted i got "unexpected end of file " error message on the file i was working on, but on several other files also in that folder.The file shows on the hard drive now as 118.6 megs.The files show up in Bridge, but with small Previews.
View 6 Replies View RelatedWhen I try to import the sketchup file into max i get the error "X32 reader terminated unexpected" I have tried importing to 3ds max design 2013 and 2014 and used different sketchup versions and also files as simple as a box. everytime i get the same error.
View 3 Replies View RelatedI have imported a series of old jpegs into Lightroom 3.6 taken in 2002-2003 and I noticed an unexpected date on the thumbnails in the Grid view.
In the Library View Options (Ctrl-J) I have selected to show the Capture Date/Time on the thumbnails.
Since the pictures do not have Exif data I had expected that Lightroom would show the regular system date/time of the picture files. Bad luck, Lightroom is showing the Date/Time of the FOLDER containing the picture files instead of the date of the files themselves.
So last week on 06-01-2012 I created a folder on a harddisk and copied a series of jpegs in there with a file date of 20-06-2003. Lightroom however is showing 06-01-2012 on the thumbnails. Not excactly what I want.
Lightroom 3.6
Windows Vista Home Primium
LR 5, not 5.2, is giving me "Unexpected error opening catalog" with the suggestion I attempt to open another catalog. All my recent catalogs give me this error.
I'm using Windows 7 with fully adequate ram and storage. The program was working OK until today.
I back up daily and that always includes optimization. I did find an earlier catalog that comes in successfully.
The Lightroom program demands lots of hours of study and work and if errors like this are frequent I'll have to reconsider its usefulness for my photography.