AutoCAD Inventor :: Punch Tool Creation From Scratch

Oct 18, 2011

A colleague & I have been trying and failing all day to create a punch tool from scratch. I did however manage to modify the geometry of the Dimple & Hole example here:

[URL].....

how to
a) build the iFeature correctly and
b) how to then extract it so that the orientation is not FUBAR when you insert it using the punch tool.

Attached are the dimensions I need. This shape when revolved about the centreline should produce a 'dimple' effect in the sheet metal part.

View 3 Replies


ADVERTISEMENT

AutoCAD Inventor :: Punch Tool Causes 2013 To Shutdown?

Jun 18, 2012

why the Punch i created causes the following? 

1. The punch will not work with part 1.I have 4 points for the Punch on part-1

2. When attempting to get the 4 punch holes on to the flat sheet it causes inventor to shutdown.I have done 4 attempts to fit the punch into the flat sheet (part-1) and 4 times it has shutdown Inventor

View 6 Replies View Related

AutoCAD Inventor :: Create Punch Tool In 2013

Dec 5, 2012

I am beginner in inventor, and I have to create punch and put them in library so it can be used later. 

View 9 Replies View Related

AutoCAD Inventor :: Sheet Metal Punch Tool With A Flange?

Feb 1, 2012

I am trying to make a punch tool in inventor for sheet metal. I noticed that for the features I could not select faces or flanges I did. I know you can extrude the same shape to get the same result but I wanted to use a face/flange so that I can retain the flat development. What is the best way around this.

To get a sense of what I am trying to make:

-square cut out

-on the bottom edge of the square I made a face that is angled at 45 degrees

It would be closest to a louver tool.

View 7 Replies View Related

AutoCAD Inventor :: IFeature Punch Tool Name When Feature Name Has Changed

Mar 19, 2013

My company is trying to put some automation together to pull design attributes of parts and assemblies to drive routing creation in the shop. 

The issue that we have run into is that for certain ifeatures, we need to gain access to the name (or punch ID) of an ifeature (primarily punch tools).  Pulling the name of the feature that the tool created is relatively easy, but because you are able to change the name of the feature as it appears in the model browser, it isn't the most reliable way to get that information.

We are looking for a way to figure out what the name of the ifeature used to create the feature without referencing the resulting feature's name in the model tree.

I've included an example, and I'm looking for the name of the tool which should be "Ob_750X562".

View 1 Replies View Related

AutoCAD Inventor :: Create A Sheet Metal Punch Tool

Feb 22, 2013

I am trying to create a sheet metal punch tool, however, I must have something incorrect because the extract iFeature does not seem to be working.

I've attached a copy of the file I'm currently working on.

View 5 Replies View Related

AutoCAD Inventor :: Punch Tool Placement Error - The File Has 0 Volume Changing Features

Oct 12, 2013

I'm using Inventor 2014.

I created a Punch Tool iFeature, everything seemed fine, I could save it without problems.

However, when I try to place it in a part with the Punch Tool, it says "The file has 0 volume changing features. To be a valid punch tool, the .ide file must contain at least 1 sketch-based feature."

View 4 Replies View Related

AutoCAD Inventor :: How To Create Punch

Aug 6, 2012

I am trying to convert punch .ipt 2013 version file into a Sheet Metal Punch iFeature...For an unknown reason to me i cannot get it to work...Have a look at the file and see why i cannot convert to a Sheet Metal Punch iFeature ?

The Punch will then go onto the Sheet Metal Plate

View 5 Replies View Related

AutoCAD Inventor :: Punch Hole Not Working?

Dec 7, 2012

Sheet Metal Parts > Punch Holes (Contintued). 

I picked the ADSK-METRIC-120 to change the hole size from 25 to 120, but the new hole size ADSK-METRIC-120 is RED color and I cannot refresh or finish it. why size 25 worked, but not the 120? 

I am using the Autodesk Inventor 2012.

View 1 Replies View Related

AutoCAD Inventor :: Possible To Create Troquel Punch As IFeature

Mar 14, 2012

I want to know if is possible to create a troquel punch as iFeature for just bend, not cut o drilled, for example, to create a squared punch  for to make a bending in a sheet metal,

View 1 Replies View Related

AutoCAD Inventor :: Making A Sheet Metal Punch

Jul 17, 2013

I have made some punches for sheet metal and this one seems to be simple but it has me stumb.

Its 50mm in Dia a 5mm lip a 28mm outside rad cone and a depth inside of =/- 8.5mm then there is a 12mm hole  

View 9 Replies View Related

AutoCAD Inventor :: Creating Punch Converting Text To Sketched Symbol?

Nov 5, 2013

I have been given the task of figuring out a way to have etching placed on our parts to show the part number of the part. The end goal is to get the parts laser cut but have the part number etched into the part.Is there a way to convert text (i.e. 12345) to a sketched symbol that the punch feature would recognize and then add it to the library? Right now we are using 2012 but will be upgraded to 2014 within the next 6 months.

View 4 Replies View Related

AutoCAD Inventor :: Known Error In Flat Pattern - 2D Sketch Punch Representation

Oct 3, 2011

I've a problem in Inv 2011 SP2 and 2012 SP1 with 2D Sketch Punch Representation.

See attached file for the explanation of the problem or this Link to animated problem.

View 8 Replies View Related

AutoCAD Inventor :: Export Flat Pattern With Center Punch Marks For Drilling Operation

Sep 5, 2012

I have a part that we will cut out on a CNC plasma machine that will undergo a drilling operation. We create all the parts that will be cut on the plasma in the sheet metal environment because of the simple flat pattern export. Our plasma machine has the ability to scribe lines and also create center punch marks. It distinguishes between cut lines, scribe lines, and center punch marks by layer name. I need a way to get the center points of the drill locations into their own layer.

View 9 Replies View Related

AutoCAD Inventor :: Sheet Metal Punch Table Not Appearing After Placing Original Point

May 29, 2012

When placing a puch table in a flat pattern drawing, can the origin point be placed anywhere or does it have to correspond to the origin point of the Inventor drawing (0,0,0)?I placed the origin point at some point which I randomly chose but no table popped up for me to chose the puch table option.

View 3 Replies View Related

Photoshop :: Scratch Removal / Does CS6 Have A Tool For That Or Are There Plugins

Jan 26, 2013

Scanning old slides often shows large scratches and specks.  How can they be removed?I use Photoshop CS6, does it contain tools for that?Or are there plugins?
 
What I'm looking for is a Scratch Removal tool like I find in Silverfast 8SE (have one bundled with my Canoscan 9000F scanner) called SDR (I don't mean the iSDR which used the sanner's ínfrared).It automaticllay searches out scratches, marks them in red, lets you adjust how strongly it hunts for them, sizes etc.Then when you like it, click to remove them.

Two problems: it only works in conjunction with scanning, can't open an existing file.And it only handles 8bit color depth.I suppose full versions of Silverfast won't have these limitations, but that would mean quite an expense.Since I have invested in Ps CS6 I'd want to keep to that.

View 1 Replies View Related

AutoCAD Inventor :: Automating PDF Creation

Aug 20, 2012

I have been looking at posts on automating pdf creation but have seen a lot with programming / VB involved but would like to avoid that if possible. I have also seen one's on batch processing but would like to do them as needed / completed.

I am trying to somewhat automate the pdf creation process.  Having them save to a specific spot / folder and having them 'plot' the same view to the pdf would be very beneficial that way we don't have to select print, print  to pdf, print this view with these details, save to this folder location. etc.

View 9 Replies View Related

AutoCAD Inventor :: DXF File Creation

Nov 29, 2012

I have a 32 page Inventor DWG file I am trying to convert to a DXF file. Unfortunately when I do a save copy as DXF,

I get 32 individual DXF files. I would like one file with 32 different pages just like it was made in Inventor or just like it is done in Autocad where you have one drawing with the tabs at the bottom.  Is this possible to accomplish in Inventor?

View 6 Replies View Related

AutoCAD Inventor :: Automate DXF Creation

Nov 4, 2008

Is it possible to automate the creation of a DXF file when you save or check-in a part file from inventor. I have already set it up to create a DWF file to a shared folder on our network but we also export to DXF files as well for use in our machine shop. As of now the only way I know of doing it, is to open the .idw file and save it as a DXF manually. How to set this up to automatically create one on save or check-in.

View 9 Replies View Related

AutoCAD Inventor :: Deployment Creation Fails

Nov 8, 2013

I have tried to create deployments on the network for my products but I keep getting a "copy function fails" error once I start it.

When you first start to make a deployment it asks for a Administrative image path which I have been point at a network location (\serverpath, etc).
I did make sure that the path length was less than 73 characters (due to a previous error).

It was suggested that I make the deployment on the local machine and then move it to the network location?

However, it does not appear that you allowed to pick a local directory for this (see attached).

View 4 Replies View Related

AutoCAD Inventor :: Sketch Creation Changes View?

Oct 31, 2012

I just installed the trial version of Inventor pro, 2013.  I'm having a problem with the view changing on creation of a sketch.  It goes to the home position.  The "Look at sketch plane on sketch creation" is un-ticked in options. 

Click on Component->Create.  Once the Component is created, click 2D Sketch.  View spins to the Home position.  This is really annoying.  I learned Inventor 2010 in school.  I don't remember this ever happening.

If I select a plane from the browser prior to clicking the Create 2D Sketch, the view remains the same as expected.  This is only a problem if you want to create the initial sketch using a face of another part as the sketch plane. Is there an option I'm missing?

Product Design Suite 2013 Ultimate
Windows 7 64-bit
Intel Core 2 Quad Q9300 2.5GHz
8 GB RAM
Nvidia GeForce 8800 GT

View 3 Replies View Related

AutoCAD Inventor :: Automatic Drawing Creation

Mar 13, 2013

I've been making iLogic assemblies with hints of VB for about 6 months now. My Boss has asked me if I can write code that will effectively create drawings automatically.

What we would like to create is a rule, which when run, creates a new drawing file, places the active assembly in a base view, then place a Left, Right and Top view of the assembly and place a parts list in the top corner. Dimensions are not really important at the moment, as the sizes of the parts are in the description field and the drawings are used for assembling the product only.

View 2 Replies View Related

AutoCAD Inventor :: Automate Drawing Creation

Jan 9, 2013

All I want to do is automatically generate a drawing for an assembly with sheets for the component parts. The assembly is being placed as an iLogic part if that makes a difference.

View 2 Replies View Related

AutoCAD Inventor :: Breaking Decal Link After Creation?

Aug 14, 2013

We are having a pretty large annoyance where anytime you open a part with a decal, a message comes up saying there is a newer decal, and asking if you want to check out the decal. From digging a little bit I have found that this is caused by the decal being linked to the image. I however have not been able to find a way to break the link on an already created and vaulted part. 

If so, how is this link removed?

View 4 Replies View Related

AutoCAD Inventor :: Axes Rotated On Part Creation?

Aug 26, 2013

In an assembly i created a new part and the center point wasn't on the main center point.Also the axes were rotated.

How can i rotate back the new part's axes, and how to move the center point?

View 5 Replies View Related

AutoCAD Inventor :: PDF Files Automatically Opening After Creation

Dec 11, 2011

Is it possible to disable PDF files from being automatically opened by adobe reader after they have been created from inventor drawings?

View 2 Replies View Related

AutoCAD Inventor :: Autoproject Edges During Curve Creation?

Aug 14, 2013

how to assign an keyboard shortcut to the, "Applications Options/Sketch/Autoproject edges during curve creation" setting?

I have a need to turn this on and off on a regular basis.

View 7 Replies View Related

AutoCAD Inventor :: Custom Materials Library Creation

Apr 24, 2012

Is there a good source of material mechanical properties on the internet?  I have been creating a custom material library with the materials I normally use and I've just been duplicating a material from the supplied libraries to create mine with a name change only.  I'd like to include the correct mechanical properties if I could find a source of information that has all the properties in the format that the Inventor 2013 materials editor requires.

View 5 Replies View Related

AutoCAD Inventor :: Work Feature Creation During Transaction

Sep 12, 2013

Has seen that even if a work plane, work axis or other work feature is created during a transaction, the screen will still update? The actual features I create using these work features within the same transaction still work just fine.

View 1 Replies View Related

AutoCAD Inventor :: Style Library Creation / Migration?

Apr 18, 2012

I am looking at moving from controlling my Styles in template files into a Style Library.  So how exactly would I best do this?  Create a new Style Library in the Style Library Manager, set it in "Style Library 1" (this makes the new Style Library "active", yes?), open my template files, and under the Manage tab, "Save" the document styles to the new Style Library?  Should I then delete my Document Styles from the template?

When you get a new release of Inventor, how do you generally go about pushing your Style Library into the new release?  Do you just copy-paste the old Style Library from the old release "Design Data" folder into the new release "Design Data" folder?  Do you start a new Style Library in the new release, compare to the old Style Library, and push the old into into the new?

View 2 Replies View Related

AutoCAD Inventor :: Creation With Select Faces And Edges

Mar 26, 2012

In the initial part of the simulation promotional video [URL]....

the internal space of the valve is selected by first selecting faces, then selecting Part Priority and then Isolation, producing the combined total flow volume space. Despite repeating this procedure many times I find I am unable to create and isolate the required volume space.  The inner surfaces of the valve are selected but when selecting Part Priority, part of the valve solid part highlights and the selected inner valve surfaces disappear. 

I have managed to derived the volume space by subtracting a new derived part, however the example provided in the video suggests the process of defining the air space can be achieved a lot quicker.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved