AutoCAD Inventor :: Plastic Molded Part
Apr 14, 2012How do I create this plastic molded part? I need to create a rectangular frame with L shape cross section and then add center round hub and then add ribs.
View 7 Replies
ADVERTISEMENT
AutoCAD Inventor :: Model Plastic Part Which Is Attached To Each Other?
Aug 23, 2013I am trying to model a plastic part which is attached to each other on one side of the edge and it snaps into each other on the other side. I was able to manage the hald section of this part but not sure how to do other half.
how to do these plastic parts?
AutoCAD Inventor :: Flatten A Curved Plastic Part
Nov 23, 2012Suppose we have a plastic part modeled as bent around a cylinder with an x-axis. Because the material is plastic and the manufacturing method is injection molding, part stretch is not a concern.
Suppose further that the part is a solid part that will be converted to a straight spring. The part needs to be flattened to obtain the correct spring dimensions--the part may have variable width in the x direction.
What is the best way to flatten this part?
AutoCAD Inventor :: Plastic Wall Plug File
Oct 24, 2011Where I can get an Inventor file of the attached (or similar) plastic wall plug?
View 2 Replies View RelatedAutoCAD Inventor :: Creating Plastic Frame / Body For Assembly
Jun 26, 2013I am building a consumer electronics prototype that has mechanical and electronic components. I have built the assembly I need at the dimensions and measurements required. I am having trouble finding tutorials or instructions on how to derive a shell or frame from the complex inner components of an assembly. What is the general approach I should take, I'll get to the details. So far I've tried a loft that goes through the areas that have very specific measurements.
View 4 Replies View RelatedAutoCAD Inventor :: Making Support And Stiffening Ribs On Curved Plastic Surface?
May 22, 2013I am trying to make support ribs on a curved plastic surface to make the construction stiffer for a snow puncher.
(Just like on the attached picture, "pic 1".)
But I am having trouble doing this over the curved surface towards the top end of the rib.
As is now I sketch the shape of the rib in both ends and loft it over a sketch (see attached picture, "pic 2"), and then revolve to get the ends.
But this gives problems, result is not good and it's very time consuming.
If this was on a flat surface it would be easier, but now I get a lip along the loft and along the revolve on the top end of the rib.
I'm using Inventor Professional 2013 Student Version.
AutoCAD Inventor :: Unable To Derive A Part Containing Only A Block Into A Sheet Metal Part
Nov 15, 2011 I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
AutoCAD Inventor :: Part Inserted In Assembly File As Tube And Pipe Run Part?
Mar 28, 2012Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedAutoCAD Inventor :: Make As Sheet Metal Part And Have Option To Flatten Part?
Dec 28, 2012The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedAutoCAD Inventor :: ILogic Rule For Each Part In Assembly To Change Part Parameter
Apr 1, 2013I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
AutoCAD Inventor :: Simplified Part - Assembly Won't Merge Into One Seamless Part
Dec 11, 2013I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
AutoCAD Inventor :: Part Created In Assembly Does Not Update To Part File
Nov 15, 2013New user 2014
Part created in assembly does not update to part file.
AutoCAD Inventor :: Can Part Make Alterations To Other Part When Inserting In Assembly
Mar 29, 2012I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
AutoCAD Inventor :: Find Mass Of A Part At Its Part And Assembly Level
Jul 1, 2013I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedAutoCAD Inventor :: Converting Solid Part To Sheet Metal Part?
May 4, 2012convert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies View RelatedAutoCAD Inventor :: 2012 Crashes When Opening Part Or Making New Part?
Feb 14, 2012As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies View RelatedAutoCAD Inventor :: Convert Standard Part To Sheet Metal Part
Aug 29, 2012In previous releases (2009 i think) when i converted a standard part to a sheet metal part i could recall all the sheet metal styles by linking back to the sheet metal template (i can't remember exactly how this was done, but it was possible with one operation)
In 2011 i canot find a quick way of doing this, it looks like i have to open the sheet metal template and export each different style (about 40 of them) and then import each one into the converted part. am i missing something? is there a simpler way similar to how it used to be done? Why have Autodesk made this more difficult?
As it stands at the moment it would be quicker for me to remodel the parts from scratch using the sheet metal template. I know this is the obvious solution, but seems strange to change something that worked well to something that doesn't!
AutoCAD Inventor :: Remove Part Form Part In Isometric View?
Oct 23, 2013I order not to hide components, i want to make a break sketch and remove a piece from a part from an assembly in the isometric view in a drawing. can i do that?
View 4 Replies View RelatedAutoCAD Inventor :: Bend Part Of Normal Part (not Sheet Metal)
Apr 3, 2013I have a structrual rectangular tube as shown in the picture below. I need to fold the four flanges inward to create a sort of point or pyramid.
View 9 Replies View RelatedAutoCAD Inventor :: Insert STEP (STP) Part Into Existing Part File?
Sep 11, 2013The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
AutoCAD Inventor :: Make Single Surface Of Part Transparent So Inside Of Part Is Visible?
Mar 11, 2013I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
AutoCAD Inventor :: Changing Part Type From Normal To Purchased Part Like Bearings / Bolts?
Apr 11, 2013Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
AutoCAD Inventor :: Unable To Make Mirrored Copy Of Part Created By Altering Standard Part
Apr 1, 2013I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
AutoCAD Inventor :: Find Part Which Is Inside Another Part Or Assembly?
Aug 20, 2013If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
AutoCAD Inventor :: Quantity Of Each Part That Are Merged By Part Number?
Feb 19, 2012Is it possible, if you have a merged BOM.row to get the total quantity of each part?
inventor professional 2011 / 2012 / 2013
AutoCAD Inventor :: Project Sketch From Part To Another Part In Assembly?
Feb 7, 2013I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
AutoCAD Inventor :: Drawing Of Part Made From Driven Part
Oct 4, 2012To create my new part, i used the deriven part of another part, and used only ‘Body as work surface’ before inserting in my new part.
When I create the drawing of my new part, why is it that I still see all the ‘Body work surfaces’ of the direven part?
When I make it on my other computer I dont see it... so it is surely an option…
AutoCAD Inventor :: Mirrored Part Gets New Part Number In Assembly
Dec 3, 2013Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies View RelatedAutoCAD Inventor :: Creating Casting Part From Machined Part
Oct 7, 2011I have a part that is designed to be made from a casting. In my workflow it makes more sense to create the as machined part first and then base the casting on the machined part usually by using save as and then deleting the machined features. I understand that you can easily go the opposite direction by creating the cast and then creating a derived part that you apply the machining features to.
I tried to derive the casting in this way hoping that you could just suppress of delete features without altering the associativity between the two files but it appears that the derived part doesn't "know" about the features on the original, it's just a solid.
It would seem that this workflow would be a no brainer since most of the time the casting depends on the finished part which depends on the design specifications, so am I missing something or is there really no way to do what I want to do without having to go the messy route of having to manually alter two separate parts every time I alter the design?
AutoCAD Inventor :: Cannot Save CC Part As Custom Part
Sep 13, 2012I use inventor 2012. In some projects the cc parts cannot be saved as a custom part (error message: Unable to create component), but in some project it works. I checked all projects settings are same.
View 2 Replies View RelatedAutoCAD Inventor :: How To Copy Part Of IPT Into Another Part File
Mar 15, 2013I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
View 2 Replies View Related