AutoCAD Inventor :: Multiple Profile Option For Sweep
Dec 23, 2011
My purpose for Inventor (2012) is for cabinetry, more specifically the majority is for kitchen cabinetry.
All of our kitchens have crown, but not the same crown profile every time. There will be dozens of profiles if not reaching 100 or more.
What I am trying to accomplish is a way to model a sweep (which I can do no problem) but I would like to have the option of changing the sweep profile on the fly. I would be sitting with a customer and they would say "yes or no" to what they like.
I have looked at derived parts and iFeature and unless I am missing it, it's not giving me what I would like. Is this where iLogic comes in? How to use that, which I know I will have to eventually.
Right now I have an .ipt file with 7 crown profiles. Not sure I want to go any further for fear of re-work.
I am having difficulty aligning the profile for a sweep feature. I need the profile to be normal to the path, but aligned vertically. In other words, the rectangular profile should remain "plumb" along the entire sweep. Is there a simple way to do this?
I have shared the sample files, trying to use the profile in two different ways, through Dropbox (they are too large to upload). I am using Inventor 2013.
I am trying to sweep a profile throughout the helical sweep path which is a series of 3d sketches. The sweet prifile sweeps correctly to the first 3d sketch profile but whin I select the second line the preview is gone and Inventor gives me an error saying the sweep cannot be done. how I can have the sweep done throughout the helical structure.Attached is the ipt file.
I am trying to perform a sweep of a profile and I am unable to select the profile. I have a part with a plane through the part. I created a profile on this plane that I want to sweep along my path. However whenever I try to select the profile I am unable to, even when I sectioned the part to the created plane.
I am working on Sweeping three helix profiles around a cylinder to create a screw thread. When I sweep the profile, Inventor gives me the error messages:
"The attempted operation would create a self-intersecting surfaces. Try with different inputs".
or
"The attempted operation did not produce meaningful intersection edges from the face-face intersection. Try with different inputs".
However, this is exactly what I need to create the helix profile I require and eventually increase the size of the Extrusion Sweep profile to 80mm. When I increase the sweep profile to 80mm I get the same error message about the self intersecting surfaces.
I am working with Autodesk Inventor Professional 2011, 64bit, 8gb RAM, Windows 7, Intel Core i7-2860QM.
The attached file shows a gear tooth profile that I need to sweep along the lines shown. The problem is those lines are not all parallel to the UCS The tooth profile is a region.
Is there a workaround to make this happen? I used to do this all the time in 2008.
I couldn't attach the file 'cause it wss too big so I saved it as a PDF but now I can't attach that because it is not a DWG
I'm using AutoCAD Civil 3D to model inner city utility construction projects. For my research project, I need to include water and storm pipes, but also various sorts of cables. Currently, I'm manually creating cables profiles using plines from existing 2D drawings and the sweep function.. a very cumbersome taks.
I was wondering whether there is a way to speed this process up. At the moment, I draw a circle, copy it myriads of times, and sweep each along the dozens of plines (one by one). I cannot select multiple lines and sweep them all, can I?
whether I can select mutiple plines to sweep all at once?
I just created a wall sweep on a wall , but I noticed the sweep doesn't adjust to the wall profile, please see the second floor wall in the attached image. Is there anyway to make the sweep adjust to the profile of the wall automatically?
I'm trying to create a Tiled Skirt (150x150mm) profile or pattern to be used as Wall Sweep. Is there anyway to create this profile as the Family Template: metric profile (wall hosted) only allow me to create a 2D profile.
I would prefer to avoid detail lines or Filled region to get the tiles shown as I need to schedule and quantify this element.
I am attempting to model an internal 1/8"-27 NPT thread, both the through hole and the tapered part of the hole are modeled, but after I draw the helix and the polygon and orient the polygon to the helix correctly, (or even if I don't, I have tried it) it keeps saying unable to sweep object. I am using Sweep with Alignment with the No option. If I select the polygon first, then click sweep, it works, but rotates the polygon so that what I get ends up looking nothing like a thread profile.
I have tried reducing the polygon radius down to a ridiculously small value, thinking it might have been interference due to a possible trig miscalculation, but with no success, still have the same issue. FYI, I am using a .037" turn height for 27 TPI and a polygon radius of .0214", with a helix small end radius of .177" and large end radius of .189".
I am attempting to creating a complex profile of a window frame using the Edit Profile command within Sweep. It tells me that lines cannot intersect. How can I draw more that just a simple rectangular profile?
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
Solution to getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT.
getting a horizontal sweep to miter with a vertical sweep? Or maybe there is a way to pick a path? A feature in the full version that Autodesk deemed unnecessary for LT
I am trying to show cut and fill hatching in the profile views but the hatching doesn't show up. I've tried changing the hatching styles, the scale, the colors, etc. but it doesn't seem to be working.
On solidworks, There is an option to rotate the profile along the path as it sweeps. I'm curious if there is anything similar to that ability in Inventor? And if not, if there is a way to create a helix along a curved axis.
I have looked through these forums and found plenty of sweep problems and the answers to the problems but none for this particular type. I made a 3d intersection curve and am trying to sweep a profile along that curve but I keep getting the discontinuous segments error. I am using standard inventor 2011.
Trying to create a 3D sweep. I want to keep the sweep parallel to the XZ plane (like a parting surface). In the attached part, there is a SweepSrf3 that has sort of what I am trying to do, but it does not go all the way around the path. Notice how the sweep is parallel to the plane. I tried to do the same thing in SweepSrf4, by selecting the 3D Sketch1 as the path, Sketch2 as the profile, and Workplane2 as the Guide Surface. That failed.
In SweepSrf4, the only way that I could get the sweep to come close to working was to use the 3D Sketch1 as the guide rail and the circle as the Path. Seems like I need to use the circle as the guide rail and the 3D Sketch1 as the path to get what I want... but that fails.
Is it possible to sweep a solid along a 3d sketched line path to cut a groove / slot? This is like milling a slot in material on a milling machine so the cutter goes along a path removing material.
I can draw a rectangle that represents the side plane of a slot type cutter and this works but in the corners it is not working like a round cutter and leaves sharp corners which then need filleting to finish, but also I am not sure if it is cutting exactly as if a solid round/cylinder cutter would.
am using Inventor 2012. Is there any way to select two rails when sweeping? One for the x and one for the y. I can only select one rail. If I choose Profile Scaling X & Y, it does not sweep the way I want to.
I have created a pipe using sweep through 2 planes and 3d sketch. I want a specific bend on that pipe to be extracted for drawing purpose. How do I do that ?
So I have a 3D sketch. As you can see in the image attached, there are circles on a 2D plane that are attached to circles on another 2D plane via all the purple lines. My goal is to do a sweep for each of the circles so that I can get a bunch of holes. However, after I do the first sweep, the sketch disappears (see pic 2) and I do not know how to go back to the sketch so I can sweep again and again.
We are developing an equation driven 3d spline using VBA.
It generates a 3D spline, guide rail, and tool profile, but we're having trouble figuring out how to do the actual "sweep with guide rail" using the API.
Attached is an .ipt of the shapes our program is generating automatically. The problem is we are having to manually create the sweep after the geometry is created.
How can we automate the sweep with guide rail process?
I am using Inventor 2012. I am trying to sweep the pink shape around the pink rectangle but I get a weird result. Can I not sweep around a rectangle from the center? See attachment. I want to add more to the shape but when I do the result gets weirder.
