AutoCAD Inventor :: Line Not Visible In IDW?
Feb 13, 2013
There are some lines that are not visible in my .IDW. I have had this before and am wondering why this is happening. Basically this is a vinyl gasket which is shown in my .iam file. In my .idw it is not showing although I have not turned off the visiblility of the part.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 5 Replies
ADVERTISEMENT
May 10, 2013
I just finish the installation of Inventor 2013 SP 2 and I have some bugs... a lot of line is not visible in my .idw !
is on a derived part (mirror) ! the other point is the center gravity is not true in the derived part, seems have some problems on that version...
View 1 Replies
View Related
Mar 26, 2013
I want to changed the default visible line weight for all drawings. I just can't get it to work. I have changed my project file settings to "Read-Write", I have tried this in both the Default Standard and my own standard. I changed the "Visible (ANSI)" Line Weight, saved it, then hit "Save" on the Styles and Standards bar. It works for a document. But when I open a new document, the line weight has reverted back to the old value.
View 4 Replies
View Related
Nov 27, 2013
One of my draftsman is trying to put an identification Tag on one of our assembly.We made a symbol with our tag, and we put it on whatever where trying to identify directly on the presentation.
Our problem is that where not able to remove whatever is behind that symbol so that we can make that Tag readable.Is it possible to make only part of a line invisible in our presentation?
View 9 Replies
View Related
Mar 9, 2012
in a drawing I made some lines invisible (right-click on the line, and uncheck visibility). how can I make these lines visible again? for obvious reasons I can not right-click on them (they are not visible), and I don't find them in the browser tree.
View 2 Replies
View Related
Aug 23, 2012
on my work pc i'm missing two features i used to have:
- Firstly, when i click a PL i can't see the midpoint of the line, and can't drag the line like i used to. I tried to change GRIPS, but can only choose between 0 and 1 when choosing grips. 0 being nothing visible, 1 being visible endpoints of the polylines. 2 is NOT valid options that i can choose.
- I can't add a new vertex. I think the way i used to do it was to hover over the midpoint and it would suggest if i wanted to add a new vertex. If this is the case, it's obvious that if i get problem 1 fixed, problem 2 will solve itself.
View 8 Replies
View Related
Jul 26, 2011
I've been running AutoCAD 2006 since it came out and have been running it on Windows 7 since it came out. I've never had any problem runnning my LT version. Today, all of a sudden I cannot type text in the multi-tex box. The cursor moves in the box but nothing is shown. I click okay but cannot select anything. It's like the cursor is moving but not laying down text. I've changed the different fonts, colors and even changed my background from Black to While and still cannot see any text.
My single line text tool continues to work just not the multi-line text box.
I also tried restarting my computer and tried opening existing files. The multi-line box problem occurs on other files to.
View 9 Replies
View Related
Apr 13, 2012
I have some Line Labels that got exploded, and they contained Background Masks.
When I make a plot, the mask plots a dark rectangle.
How can I make the masks visible so that they can be erased? Is there a variable for that? What type of entity (name?)are they?
When I make "wipeouts" visible, you still can not see the masks.
C3d 2010 (no SP)
Win7
View 2 Replies
View Related
Jan 27, 2014
have just downloaded paint.net - no problem on many basic functions but cannot get the line tool to give me a visible line. I have changed primary and secondary colors to make sure regardless of whether I'm left or right clicking the line will stand out against white background. I have increased width to six pixels to make sure it will be nice and thick and visible. I do get the four little box thingies when I release the cursor, and I can then go in and manipulate them. But no matter what I try I cannot SEE a line.
View 5 Replies
View Related
Feb 23, 2012
Is it possible to create a non-plottable line style that is only visible in a plan view? I want to use something other than the invisible line.
View 3 Replies
View Related
Nov 29, 2011
Two computers with Inventor Pro 2011 on them, same set up in Apllication Options/Content Center and Apllication Options/File. On one Inventor sees Content Center on the other does not. What could be the problem?
View 2 Replies
View Related
May 11, 2012
I'm working on a small Assy (25 parts). When I open one of the parts from this Assy and work on it then go back to the Assy many parts are not visible. The update button is usually off so I can't use it.
This started only about 2-3 weeks ago - in every assy. I changed the nvidia driver but didn't work.
Inventor pro 2012
Win 7 Pro. sp1 64 bit
Intel Core I7-2600 CPU
Ram - 8GB
Quadro 2000 D
Nvidia 275.89 (tested nvidia 296.70 with no luck)
View 4 Replies
View Related
Feb 27, 2013
I have imported an .igs and would like to use it on my assembly.
Step that I created.
1. DL an igs files, then open it in Inventor 2012 Product Suite.
2. Save as .ipt,
3. Create a new .ipt and then DERIVED the save .ipt, change scale to 25.4
4. Save the part
5. Open .idw and place the part you just save.
Result: Notice that nothing is visible. WHY?
View 2 Replies
View Related
Nov 2, 2011
Attached is a test drawing
1. Why does my part not show up behind a surface?
2. What is the minimum dimension to make my part appear?
On the drawing I was working on, the part completly behind a surface was showing up until I rotated the view, then it dissapeared, this behaviour is not present in the test idw, the part doesnt appear at all behind the surface.
View 1 Replies
View Related
May 16, 2012
There are times with a breakout that it is desirable to have the sketch used to create the breakout visible to make it clearer on what's going on. When I right-click on the sketch in the browser there is no option for visibility. How do I make this sketch visible?
View 2 Replies
View Related
Nov 12, 2013
I can't see any of the inventor toolbars anymore.
if i would still have the Quick Acces Toolbar this wouldn't be a problem but that one is also gone.
View 3 Replies
View Related
May 13, 2013
in my assembly part visibility is controlled by a Ilogic rule which selects an Iassembly. This assembly is a parametric model controlled by excel. The visible parts have to be exported to dxf.
Everything is working (iterating through parts, export sheet metal to dxf), but how can I check whether a part is visible within the assembly?
View 1 Replies
View Related
Oct 21, 2013
I have unfolded a 3D model into a flat plate, however the bend lines/extents do not appear in ISO.dwg
I doubled clicked into the view to access 'Display Options'. However, I cannot tick the box to display bend extents as this option is shaded out (refer to attached screen dump).
View 7 Replies
View Related
Nov 25, 2013
This subject have been around since version 2008.
1- I want to be able to insert an ipart ( only sketch) into an assembly and run frame generator.
2- If I have to change the component in the assembly I want to be able to click the ipart table with the right button of the mouse and choose "change component".
picture in attachment
2008/2009 Bug
[URL]
View 1 Replies
View Related
Dec 12, 2013
For some reason I have not been able to generate a pdf file with visible lines fro the attached file.
View 9 Replies
View Related
Dec 27, 2012
We resently upgraded to Inventor 2013 and since then we have been having an issue of dimension and leader lines being hidden under a text box or some other drawing entity.
This is very confusing since the text box does not have a white out associated with it, nore is there a way to put the test box to the back and dimension lines to the front...
It seems like our puppet masters that program this amassing tool where up to something and didn't quite get there.
IT sure would be nice (or an absolute requirement) that this gets fixed so I don't have to learn new hoops to jump through to get a quality drawing out of Inventor.
View 6 Replies
View Related
Jan 9, 2014
I know how to get the "work features" to show up in the assembly however, I would like to to be able to utilize the UCS if possible. When I try to use the iPart Author to select the Work Features the UCS doesn't show up.
View 3 Replies
View Related
Oct 18, 2013
I'm using inventor studio for the first time(Inventor 2014 / Windows 7). I'm having some trouble with work surfaces showing up in my rendering. The surfaces are set with the visibility turned off. When I'm in my normal assembly window, they're invisible. They're even invisible while im in studio, setting up lights & such. They only show up on my renders. If i go into each part and suppress them they render ok. Problem is I have sketch geometry and constraints that crash when they're suppressed, so I really need them as active, but invisible.
View 3 Replies
View Related
Apr 3, 2012
I wanted to rename one of the default layer, "Visible," to "CUT" since that's what our plasma cutter looks for.
However, I created a copy of Visible named CUT. Now when I open a new drawing, I get the usual, "The following definitions in template Blah differ from the definitions in the style library..."
I know I could update each template, but I'd rather just delete the copied layer in the styles library. However, I don't see how. Any tips on removing my extra layer with out starting from scratch? Or how to rename a default layer?
View 4 Replies
View Related
Jul 17, 2013
Since I switched to Inventor 2010 Pro, I've been seeing an issue I can't find resolution to. If I have an assembly that is one purchased part, I shrinkwrap it and place it as a part. Been doing that since shrinkwrap first appeared. For some reason some of my shrinkwrapped parts, though set to invisible in the assembly, (I am using association and representations, saving, locking and all that nice stuff), still show in the drawings. Even more insane is that the visibility is off in the drawing. Yet, there it is, big as life. My only fix so far has been to revert back to the assembly instead of the shrinkwrapped part.
View 2 Replies
View Related
May 4, 2012
I have autodesk inventor 2012 and I'm building an assembly of an air compressor. One big part is coloured yellow and has on both sides decals with an image on them.
When I open my assembly file, the part is there in my assembly but it is coloured gray and no decals are visible, if I open the part with the decals it shows perfectly, So if I use replace and put the original file back in there, it's fixed, until I close and reopen the assembly ! Again the part is other colour and no decals visible ...
Have tried to delete and place the decals again, no difference...What do I have to do ?
View 8 Replies
View Related
Apr 16, 2012
I'm performing a static stress analysis on a benchframe. The benchframe is imported out of a STP file and I assume that's where the problems begin.
When I start the simulation, everything goes well. When I see the results, almost the whole part is blue, and only a really small part in a corner is shown red, with extremely high stresses.
The corner is actually not what I wanted to test, but it is messing up the other visible results because now I have to place probes all over the part to see the stresses (because the colors are calibrated with the high peak).
I have tried working with local mesh control and convergences, but I can't control the results in the small corner. I also tried rebuilding surfaces and adding fillets.
Is it possible to set a maximum stress, so that the other colors are visible in the important areas. It is not possible to exclude the corner from the simulation because it's part of a substantial part.
View 3 Replies
View Related
Nov 1, 2012
I can't see them until I put the cursor over them. Enclosed is a jpg of the problem. Ram for Inventor process is at 700-800,000 k-bytes. My graphics card is a Nvidia Quadro FX 580.
View 6 Replies
View Related
Jan 6, 2012
I'm add Add button on exists inventor ribbon tab.After reload my add-in from Inventor buttons is invisible
View 3 Replies
View Related
Jun 10, 2011
We use multiple sheets only in case when 1 sheet is has not the sufficiënt space for showing al details of an assembly-drawing.
I'm wondering why the "Update all sheets" icon is allways visible when using more then one sheet in a drawing.
View 4 Replies
View Related
May 23, 2013
When I export dwg in pdf a sketched symbol with a bmp becomes not visible.
The problem there is if I use the command Export and if I use the command Save Copy as.
View 1 Replies
View Related
