I'm attempting to create a spherical globe with continents uniformily protruding from the surface (say 1 or 2 millimeters). I've given it a few tries, but every method I've used either fell short or resulted in huge distortion. There are really two signifcant hurdles, the first being etching the continents onto the globe, and the second being giving them a greater diameter than the globe.[URL]
View 2 RepliesNow I am very limited in my use of Xara Xtreme but I am currently needing to create an image of a world globe and around it (maybe even spewing out of it) I would require like something that conveys technology.
View 5 Replies View RelatedAm trying to create a corridor datum surface that goes around Protruding lanes but it seems I am Short on knowledge here. the outer lane, LaneOutSideSuper has a greater thickness than the inner lane (same sub assembly) and I would like my datum surface (actually, not only the datum surface but other layer surfaces) to attach its self around the bottom links of both surfaces but it shoots from the Crown_sub to the outer lane Datum.
I have used the bottom links overhang and adding feature lines to the surfaces but it doesn't seem to cut it. Attached is an illustration of the section view. The top figure is what I hope to get and below is what i seem to get.
I want to make this picture into the a Globe one.
here is the map but it flat one.
i want to make this map as a globe.
I saw a globe designed in half, turning around. You could see the interior with the continents visible on the in- and outside.
So it looks like a boll cut vertically in half and made hollow with the continent projected on the inside and outside.
I'm writing a coursework about banks and need to insert a picture, which shows the globe in unrealistic greenish color. Someone told me about Photoshop, that it has eyedropper and fill tools. But I really feel missing with all those complicated tools and get tired of trying to understand what is what. replace the greenish color of the globe with blue one, so it looks more like of the same color as the bottom book from the stack. The rest of the things on the pic should remain the same with their colors. URL....
View 7 Replies View RelatedI need to animate a series of images circling a globe. I know that I can use fx to move a single image across the screen, but can I create multiple images moving behind it on the same path?
View 1 Replies View Relatedhow can i make this design?
View 8 Replies View RelatedYou know those fish eye lenses which can make completly 360 degress images.
How can i make a 360 effect of a normal image.
For Example:
Take this image for example - i would like to make the 360 degrees fisheye lense effect on it.
Like so - but using all the elements of the image (here i just used a fisheye lense image)
Yes i know about the liquify lense enlarge mode - but that wont do it.
In my mind i think youd atleast have to layer copy the image 4 times, rotate them facing opposite directions - then merge them cleanly and then may just maybe lense zoom them.
PS CS2, Im trying do a animation GIF on spinging globe with few lines cut across the center of globe.
View 3 Replies View RelatedI've searched the forums but unable to find exactly what I'm looking for there. I'm designing an invitation to a winter themed event. I'd like to put my nonprofit's logo or the name of the event inside a snow globe. I've played with various tutorials on creating custom globes, but I think perhaps it would look best with an actual photo. There are a few nice images on istockphoto.com but prefer I waste credits, I'd like any advice on how to make my image look realistic (so the logo or text looks like it is INSIDE the globe and not on top).
View 2 Replies View Relatedwhere i can get a good snow globe effect
View 1 Replies View RelatedI used a rectangular image and the result is more oblong.
View 1 Replies View RelatedI want to get the kind of warped line effect that the artist has got going on in the background how exactly I can create it?
View 6 Replies View RelatedHow to get the Globe link extension to work with 2013. I keep getting the error
"You must turn off Google Earths Terrain before acquirement"
I get this even after turning off the terrain feature.
I have installed the latest version of Google Earth.
I'm writing a coursework about banks and need to insert a picture, which shows the globe in unrealistic greenish color. Someone told me about Corel, that it has eyedropper and fill tools. But I really feel missing with all those complicated tools and get tired of trying to understand what is what. How to replace the greenish color of the globe with blue one, so it looks more like of the same color as the bottom book from the stack. The rest of the things on the pic should remain their colors.
Here is the original picture that I need to edit [URL] ...
I'm having an issue creating a DXF from a IDW. After selecting the DXF option I get a message "Problems encountered while saving the document". Why the error occurs and how to remedy it?
View 1 Replies View Relatedis there a simpler way of creating these patterns or a way of doing less work to create these patterns?can this be accomplished with a formula/ function?
View 4 Replies View RelatedI'm recently using inventor a lot. But now IM try to make a .IDW template with my own line styles and thickness and stuff. This is what I do:
I open an exciting IDW file. I go to manage and click style editor. Then I create a new style. Called test style. I make sure I activate my new style and I go to layers, where I change the line weight from 0.51mm to 0.25 mm (example)
I save my change and close style editor... After that I save my copy as template (called test 6-1) and close the drawing. I open inventor and create a new file. Select the template I created. I get this style conflict.... I don't fully understand this error... How can I fix this problem?
When my new template opens, I check the line weight by the style editor but the weight detente change... Its still 0.51 mm.
I have searched this forum for a way to create 3D pdf files directly from Inventor or other "free" software but have not found anything that works very well. Today I found an answer, it is by using the Bentley Viewer. I had to "Save Copy As" my Inventor .iam file to "AutoCAD DWG Files.dwg". Then open it up inside the Bentley Viewer, go to the "Print pdf" button and select the "Print to 3D" button. It will even show some colors.
View 9 Replies View RelatedI am using a plane for my zero lines in my assembly drawing. For my customer to complete the approval drawings i need to dimension to it.
View 2 Replies View Relatedi am modeling a trailer's suspension and im to the point where i need to add the Air Bags... I made an assembly that consist of 3 parts. Top plate, Rubber Bag, and Bottom Plate... The quesion is: How do i make the Bag (With the bottom plate attached and top plate attached) act like actualy rubber that flexes, compresses and extends?
View 9 Replies View RelatedIs there anything wrong with creating a new template this way:
1. Create a new model for a new client.
2. Create new drawing based on the standard template.
3. Bring in model views and create new title block, notes, symbols, etc. specific to new client.
4. Save drawing as a client specific template in my template directory.
5. Open new client template and erase all drawing views but leave notes, symbols, title block, etc.
6. Save.
The question is, doing it this way, will it cause problems? Will the drawing views somehow still be linked to the template? Should I erase the drawing views BEFORE saving as a template? Is there a better way ti create a template?
I'm having the constant problem, with IV crashing when trying to export an UK/EU A0 sheet. If I drop down one sheet size to A1 the export to PDF works with out a problem.
I've got the latest SP and fixes installed, so I don't know if it is IV or Adobe XI Pro at fault. Plenty of memory, paging file set to min of 8192 Max of 32768 so there plenty of space, 8MB Ram. Windows 7
What I've tried is save the file as a different name, file is NOT compressed on the HD, the HD is not faulty I've ran several test & checks, the folder & file are not corrupted, no viruses reported after deep scan, so now I'm stuck here wondering why IV will not export an A0 sheet to PDF.
Inventor 2013 Pro
How can I create a rib that touches a plane and the end of a cylinder? Inventor will not do it since the thickness of the rib does not touch the cylinder (see attachment).
View 8 Replies View RelatedI have to design a new part based on joining two of an already made ones. I thought it would be as easy as a "union" command in AutoCAD... but couldn't find anything that resembles that, and I really need them to be a joint part, since I will be printing them in a 3D printing machine. how I can do that in Autodesk inventor?
View 4 Replies View RelatedI'm having problems creating a boundary patch on the attached model, Its a Y-Pipe joint in 3 planes that I'm attempting to split in half. I've used a silhouette curve to create a centre line in a 3d sketch then joined the ends together, however when I try to select the lines to create the boundary patch it only allows me to select some not all of the lines.
View 4 Replies View RelatedI want to make some icopy tools to suit my needs, i did the tutorial i've found on AUGI "an icopy how to" and then i did a glass panel using the technique i learn there. Everything works fine until i place the icopy on a different plane than the x, y plane.
when i place it in other plane it the icopy behave in strange way. I had this problem since the first icopy test i made and i can't find why it doesn't work.
Lets say, I have an Extrude feature built on a Rectangle as Sketch Profile. Is it possible to programmatically edit that Sketch, add one line in the middle dividing the Rectangle and replay the Extrude, so that I get Rectangular solid and a Partition surface in between?
This was not possible as a user, but programmatically if its allowed to turn ON some Non-Manifold flag and allow this. If allowed, this probably may not be a single Extrude feature doing both Solid and Surface, but could split into 2 Extrudes.
Is there away to use an IFeature creating a new body?
I mean, modeling a part as multibody, i would like to insert a feature with an iFeature, but i would like too that that new feature will be a new body.
I have tried in many ways.. including inserting in the ifeature a Split Feature..but with no sucess.
I drew the first sketch. i want to insert an offset plane. i use the plane tool, mark 2 sketch entities and a plane is formed. i move it, but it moves only on the plane of the sketch, the dialog box for the distance doesn't appear.
View 3 Replies View Related