AutoCAD Inventor :: Create Tool Button On Annotate Tab Of Ribbon

Jan 17, 2012

I want a to create a tool button on the annotate tab of the ribbon. The button will toggle between having the 'display line weights' box (on the drawing tab of the application options dialog box) ticked or not ticked.

I have the settings set to display true line weights. (so i can visualize how the actual print will look, but need it off to be able to draft properly).

View 1 Replies


AutoCAD Civil 3D :: Lost Add Labels Menu Button On Annotate Ribbon

Jul 13, 2012

I seem to have lost my Add Labels Menu Button on my Annotate Ribbon. I have tried reloading my workspace but it is still gone. How to add it back on?

View 2 Replies View Related

AutoCAD Inventor :: Create New Ribbon With Button

May 23, 2012

How to create a ribbon with a button. I am creating an add-in for Inventor. I am trying to put this code in the Activate Sub but it's not adding the ribbon once I open a drawing. Just trying to use this example to get me started.

public void AddParallelEnvironment(){ Application oApp = ThisApplication; // Get the Environments collection Environments oEnvironments = oApp.UserInterfaceManager.Environments; // Create a new environment Inventor.Environment oNewEnv = oEnvironments.Add("Some Analysis", "SomeAnalysis", null, null, null); // Get the ribbon associated with the assembly environment
[Code] ..........

View 1 Replies View Related

AutoCAD Architecture :: Add Multileader Panel Onto Annotate Tab On Ribbon?

Jul 18, 2012

How can I add the multileader panel onto my annotate tab on my ribbon?

View 4 Replies View Related

AutoCAD Inventor :: Putting More Than One Button On Same Ribbon

Sep 12, 2011

I am new to the ribbon and am having trouble putting more than one button on the same ribbon. I have two addins that both have buttons that need to go on the drawing>Place View tab but I can only see one button. If I put them on different tabs they both appear, what is my problem?

View 1 Replies View Related

AutoCAD Inventor :: Add Custom Button To Ribbon To Launch ILogic Code Using VB

Jan 16, 2013

I'm trying to find a way to add a custom button to my ribbon that will launch a global rule or form using VB. I know of a way using VBA but I want to get away from VBA. I'd much rather create an add with VB and use that.

I'm currently running IV 2012.

View 1 Replies View Related

AutoCAD Inventor :: How To Make Button On The Ribbon For Running Specific Macro

Jun 16, 2011

I know I can make a button on the ribbon for running a specific macro. But, is this possible for iLogic rules? I would love to be able to run rules and launch forms from the ribbon!?

View 5 Replies View Related

AutoCAD Inventor :: Add Specific Tool Bar To The Ribbon

Jan 20, 2012

If there is a specific toolbar that I want to add to the ribbon how is this done? I see that you can find the toolbar of your choice then slide specific commands using the "Add" button.

Or I can turn on the entire toolbar and place it somewhere around the model screen, but that shrinks the model viewer.  

View 6 Replies View Related

AutoCAD Inventor :: How To Create Custom Sketch Ribbon

Sep 14, 2012

How to create a custom ribbon with sketches cmd... I found example for assembly context... it work well but I don't find how to do that in sketch mode... The goal is to control the cmd the user can use.

View 3 Replies View Related

AutoCAD Inventor :: Create Ribbon Cable Between Two Connectors

Nov 18, 2011

I am trying to create a ribbon cable between two connectors, but for some reason the ribbon cable starts away from the connector and I am not sure why?

View 4 Replies View Related

AutoCAD .NET :: Running Macro From Ribbon Button

Jun 21, 2012

I have created a ribbon bar in autocad 2012 using API and  c#. On ribbon button i am executing a Command method which display a wizard for copying some files.

Now i want to run a macro before executing the ribbon button command method. Which display a message box with yes and no . if user click yes command method will executes itself and display wizard for copy files.

If user click no command method will not execute and return. This will allow user to use macro for customizing the file copy process.

View 4 Replies View Related

AutoCAD Architecture :: Ribbon Panel Button That Is The Same As Alt+1

Mar 20, 2013

I'm using a disto laser with my tablet running "AutoCad Architecture".  The laser can be set to fire using a combination of Alt, Shift or Control keys plus a number or letter.  I arbitrarily set it up as "Alt 1". My old tablet had a mechanical button that I easily assigned this function. For my new setup, I need this button on the ribbon but I can't figure out what Macro text format is the same as pressing "Alt 1". 

View 1 Replies View Related

AutoCAD .NET :: Link Help File To Ribbon Button?

Oct 8, 2013

I have been trying to understand how to get from a ***.docx file to ***.xaml and then link that into my project.

Is it a simple matter of saving a html somehow or am I missing the boat?

View 9 Replies View Related

AutoCAD Inventor :: How To Create Icon For The Button

Mar 12, 2013

I've created a button that I've implemented into inventor. However I am at a loss as to how to create an icon for the button. I've read all the articles i can find (such as)



I've restarted the program and the computer multiple times but to no avail.

View 6 Replies View Related

AutoCAD .NET :: How To Change Label Of Ribbon Split Button

Dec 10, 2012

how to change the "Label" of a ribbon split button.  It keeps inheriting the name of the first added button.

View 2 Replies View Related

AutoCAD 2010 :: Put Ribbon Button In Middle Of Panel

Oct 23, 2013

I am new to creating ribbons.Is there any way to put two vertical ribbon button just in the middle of the panel? Is it possible to align Ribbon Buttons? Or changing properties of ribbon buttons like font size?

This is part of my code that creating two vertical buttons in a panel,but unfortunately they aren't  align.
 Dim ribbonbutton5 As New RibbonButton()
        ribbonbutton5.Text = "Detail"
        ribbonbutton5.ShowText = True
        ribbonbutton5.ShowImage = True
        ribbonbutton5.LargeImage = getBitmap(My.Resources.Rib_32)
        ribbonbutton5.Image = getBitmap(My.Resources.Rib_16)


View 1 Replies View Related

AutoCAD Inventor :: Create A Custom Button Command

Jul 17, 2012

I'd like to know if it is possible to create a custom button with existing command  in inventor.

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Ribbon Button - Custom Schedules

Feb 18, 2013

How to add buttons and create my own ribbon in AutoCAD, but now I would like to be able to have buttons for two different schedules that I have created. While I can have a button start the schedule command it won't automatically pick the schedule that I want it to create.

View 1 Replies View Related

AutoCAD Inventor :: Annotate From Origin Without Having Long Dimension Line To Center

May 17, 2013

I'm wondering if there is a way to annotate from the origin without having a long diminsion line to the center. (see image) I want it like the 'linear diameter' but not with double my size. I always have to annotate the projection from center and this would be easy much more easy to do.

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Ribbon Button Image Won't Repopulate After Modifying Bitmap Image

May 21, 2013

I am updating my CUI ribbon for some of my customized buttons.  I have changed some of the bitmap images that I have saved in my network folder for the network AutoCAD customization.  However, I cannot get the Ribbon to update to show the new button images.  

I have opened the CUI, browsed down to the partial CUI for our corporate configuration, then to the "Ribbon", then to the "Tabs", then to the individual section of the tab and clicked on it.  Then I click on the specific button in the "Panel Preview" pane to get the properties for that button to show.  Then at the bottom of the "Properties" panel, I click on the "Small Image" line to see the three dots that allow you to browse to where the .bmp is stored.  I have not renamed the bitmaps, but just modified their color and the way they look.  So I have to change the .bmp file to a different location in the small image properties, then change it back to the correct image name.  It will update the appearance in the "Panel Preview", but will not update the actual ribbon.  I click on "Apply" and "OK", and it still doesn't update the actual ribbon.  I have tried closing and restarting AutoCAD after that.  As a last resort, I rebooted to see if that would complete the change, but in vain.

I made sure that the network location for the bitmap files is listed in my Options > Support File Search Path (very near the top of the support file list), but that still isn't solving the problem.

How to get AutoCAD to completely forget the old image that is showing on the ribbon and repopulate it with the updated bitmap image?

View 1 Replies View Related

AutoCAD Inventor :: Unable To See A Selection For Weld Symbols In Annotate Symbols?

Nov 18, 2011

When working in a drawing, I don't see a selection for weld symbols in Annotate - Symbols.  Are they not available in LT?  Is there something I need to do to activate them?

View 1 Replies View Related

AutoCAD 2010 :: Ribbon / Tool Bar

Jun 15, 2012

How the actual file location of a drawing can be shown on the ribbon insert of just the file names. For example, file name BOM.dwg is located in C:custom---. Currently, the tool bar is showing AutoCAD BOM. dwg but I want it to show AutoCAD C:custom---.

View 2 Replies View Related

AutoCAD LT :: Layouts In The Tool Palette Or In A Ribbon?

Aug 20, 2013

I have created one drawing with 10 Layouts in different formats(A1,A0...etc) and with different Legends on it. I need to give these layouts to lot of users, where everyone uses one layout out of 10 in their drawing. Is there any way to add them in tool palette like dynamic blocks? or is it possible to add thme as a ribbon in the dwg template? 

View 3 Replies View Related

AutoCAD .NET :: How To Create A Ribbon Upon Loading DLL

May 7, 2012

this newbie question. I could not figure it out how to do this.

I found a sample project named RibbonSample in which by running a command, a new tab will be added to the ribbon.

I am trying to have that tab added upon loading the dll. So I added that command in the constructor of the dll, by "

SendStringToExecute" command. But the new tab did not show up. Then I added the method which creates the tab in the constructor, and I found the same thing. In both cases, when I type the command for creating the ribbon tab, a second tab, along with the first tab I added in the constructor, show up.

So I guess two possible options I have: first, find a way to make the new ribbon tab to be shown at first place, when the dll is loaded. Second, to find a way to postpone running a command added in the constructor of the dll, until the dll is loaded, so it can run like when I type it.

View 3 Replies View Related

AutoCAD 2010 :: Ribbon Disappear Along With Tool Bars And All?

Jul 28, 2013

My ribbon disappear along with my tool bars and all.

View 3 Replies View Related

AutoCad :: Icons From Tool Palettes For Ribbon Menus

Feb 11, 2011

How best to take icons from the tool palettes into the ribbon menu ?

I am currently going through the laborious process of moving my company tool palette commands into ribbon would be great to find a quick way to grab our custom icons from the palette and use them in the ribbon.

View 6 Replies View Related

AutoCAD Inventor :: Create Punch Tool In 2013

Dec 5, 2012

I am beginner in inventor, and I have to create punch and put them in library so it can be used later. 

View 9 Replies View Related

AutoCAD .NET :: How To Create Ribbon Tabs That Persist Through Workspace Changes

Sep 3, 2013

I've followed a few examples and am able to create a new tab on the Ribbon, with panels and buttons, that appears when my DLL is loaded. However, it doesn't persist through workspace changes. I've read that this is due to my use of AdWindows.dll and my current code, as opposed to AcCui.dll, which would modify a CUIx file (that I don't know much about) to make persistent changes.

Here is a sample of my current code.
public class Commands : Autodesk.AutoCAD.Runtime.IExtensionApplication{public void Initialize(){Application.Idle += callback_Idle;}private void callback_Idle(Object sender, EventArgs e){CreateRibbon();Application.Idle -= callback_Idle;}private void CreateRibbon(){RibbonControl mainAcadRibbon = ComponentManager.Ribbon;if (mainAcadRibbon != null){RibbonTab rTab = mainAcadRibbon.FindTab("Tab Name");if (rTab != null){mainAcadRibbon.Tabs.Remove(rTab);}rTab = new RibbonTab();rTab.Title = [code].......

View 5 Replies View Related

AutoCAD Inventor :: Create A Sheet Metal Punch Tool

Feb 22, 2013

I am trying to create a sheet metal punch tool, however, I must have something incorrect because the extract iFeature does not seem to be working.

I've attached a copy of the file I'm currently working on.

View 5 Replies View Related

AutoCAD 2013 :: Insert New Tool Icon On Image Context Ribbon?

Mar 26, 2013

I'd like  to insert an adjust image tool on image context ribbon.

Civil 3D (2013)

View 2 Replies View Related

AutoCAD 2013 :: Missing Create View Tab Under Layout Ribbon

Oct 12, 2012

I am looking to import an Inventor file and create views of it in AutoCAD 2013, However this is what appears under my Layout ribbon.

View 9 Replies View Related

Copyrights 2005-15, All rights reserved