AutoCAD Inventor :: Color Variation Using Design Views
Nov 5, 2013
I desire to have the shell of my tower have it's outer face to be red on some models and white on other models it's used in. I figured I could do this using a design view, however if I only change the color of the outer face in a design view, it seems to change it across all views.
If I change the color of the entire shell, then the design views seem to remain unique from one another. I don't really understand why the entire color of my part has to change, is there any form of workaround is this just a limit of the software? Attached is an image showing the issue.
View 3 Replies
ADVERTISEMENT
Oct 4, 2011
My drawing has two design views, an old and new. They need to align perfectly, superimposed; is there a way move DV's, align them more than the Horiz/Vert./In Pos. currently available? How about make a DV Grounded or Fixed?
View 1 Replies
View Related
Mar 5, 2014
I am struggling with color variation between different documents in AI. Even when both documents have been assigned the Adobe 1998 RGB color space, and colors are identically called out in RGB, my output varies between the documents. This is difficult as when I do color management is a "swatch" document to get my client approval, then insert that color into a different document, it changes. Any input?
View 2 Replies
View Related
Nov 12, 2012
Is there a way to have the lines in drawing views be the same as the part colors instead of black (like MDT used to do)? Not rendered, 2d lines.
Also, when exporting to .dwg part color lines & the parts as blocks would be great. Ok, maybe I'm asking too much.
2013 IV Pro, SP 1.1
Win 7 Pro
View 1 Replies
View Related
Oct 15, 2013
Any way to, have a source color chart, a target color chart, calculate what are the variations between them, and then use that to apply it to another image? I'm not talking about "match color", I know how that works, but is not what I'm looking for. It can be compared to switching to a custom color profile (calculated by the variation of source and target). Or something like "color lookup" (but with a custom icc/icm/lut). Creating a custom icc has been really complicated for me, and I still can't get it to work. (I have the icc profile, but can't open it nor from "convert profile" nor from "color lookup").
View 9 Replies
View Related
Jan 21, 2013
I was just asked to take an existing drawing and "fudge" the drawing with new dimensions to create a variation.So I over rode the dimensions and edited the title block date/drawn by.
I replaced the model reference HOWEVER......I have not been able to CHANGE the title or drawing number (despite the fact that the replaced model has the iProperties that I want).
I suspect this is due to the fact that the drawing is set to NOT update (I have red lightning bolt).
Can I get away with doing what I want without recreating the whole drawing?
Inventor Product Design Suite 2013sp2
Windows 7sp1 64-bit
nVidia Quadro 2000
View 1 Replies
View Related
Oct 13, 2013
I have created multiple sections and produced drawings, but now need to amend the design and provide 1 additional section on the drawings. I added an additional sample line to the sample line group and then updated the secion view layout but the additional section did not show in the multiple section view. Is there a way to add the additional section to the existing multiple section view? or do I need to go through the process of deleting the current sections and creating a new multiple section view that includes the new sample line?
View 1 Replies
View Related
Oct 9, 2013
I wanted to use the program to design a robot for our school vex competition. Vex has provided cad files for all the parts. So, how i can import the seperate parts into one design. I can only open each part individually but cant find a way to combine them so can assemble the robot in one design.
View 2 Replies
View Related
Apr 10, 2012
I just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....
View 2 Replies
View Related
Feb 24, 2014
Some of the lighter, saturated colors in the PANTONE+ swatches library appear to be a different color in the swatch list than they are when applied to a design. see below for screen shots.
i can duplicate this situation on calibrated NEC MultiSync monitors and uncalibrated laptops. We are running on Mac OS X.8x and above.
Designers are complaining about not being able to pick a color from the Swatch Library in AICS6 or AICC. InDesignCC does not seem to have the same issue.
View 1 Replies
View Related
Dec 31, 2013
I am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.
View 2 Replies
View Related
Jul 12, 2012
I have been searching for a variation of the AR-B816 standard hatch pattern for a while with no luck. I would like the same 1:2 ratio only in a stacked bond, not running.
View 4 Replies
View Related
Apr 3, 2013
I am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change.
So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?
View 9 Replies
View Related
Aug 29, 2013
i have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before
View 1 Replies
View Related
Jan 19, 2012
How could I get the idw views to name themselves? Instead of ” view 1”, “view2” why not have it name itself the file name, the same goes for a parts-list added to idw sheets? When slow clicking them to rename they already have the file name referencing the view or parts list. I have multiple views and multiple parts list on many sheets. Re-naming them is starting to get old!
I took a quick look at “ILOGIC” because that’s my “ILOGIC” speed and nothing jumped out at me.
View 2 Replies
View Related
Dec 26, 2011
As most of you probably know, Lightroom cannot properly deal with Nikon's Active Delighting -- it just "ignores" the information, whereas vendor specific software interprets that information. Since vendor specific information can later on redo the ADL development process which usually happens inside the camera the necessary information must somewhere be preserved.
Most metadata-editors know settings like ADL off, moderate, high, etc. But that cannot be all there is. I noticed that my D7000 varies the under-exposure (1/3 EV -> 1 EV) in the same ADL-setting. What I'm looking for is exactly that amount of under-exposure (or a value from which I can derive that).
View 5 Replies
View Related
Jul 11, 2013
Is there a way to change the way the dimensions text shows up at arbitrary angles and make them all uniform?
View 4 Replies
View Related
Mar 18, 2013
I have two seperate parts that I have laid out on a drawing. I wish to align these parts.... Is this possible?
View 2 Replies
View Related
Oct 6, 2011
Is there a way of dimensioning the distance between the views on a .idw?
I have a series of drawings to make, that consist of two view each. I need to make them as consistant as possible, as far as the distance from view to view, accross the drawings.
View 3 Replies
View Related
Nov 23, 2012
So I am trying to create section views that detail the correct assembly of two parts.
These parts are welded on top of each other so its important to have clear understanding of how they fit together.
So imagine a pipe bent in the shape of a circle, in the horizontal plane, then holes drilled into the top (vertically) and then another pipe fitting in the holes and being welded together. This is what is happening.
So I am trying to create a section view of one of the holes with the welding information.
When I go to create the section view, I draw a line that would pass through the center of the large horizontal circle (but doesnt) and the center of the hole I am trying to detail and through to the outside of the horizontal pipe.
Now with this line I should get a view of the assembly exactly perpendicular to the line from that point. This is what is called "Aligned" in Inventor and what I was taught as a "Section View". However, this is not the case at all. I get what is called a projected section view.
find a way to get an "Aligned" view of this without sectioning the entire assembly. I just want the small bit necessary to show the relevant information.
View 2 Replies
View Related
Oct 16, 2013
Let's say I have a flat pattern view of my part and the bended top view of the same part on the same drawing and I want both of the left side of each to be in line. (The right side shortends after the bends occur but the left side is not changed at all)
Work around:
1. Export to autocad and line them up with the osnaps, etc
I know how to sketch per view and project geometry but thats still on each view and when I try to line them up I am using my eye. Is there a better way to line both up even though their on different views?
View 5 Replies
View Related
Feb 12, 2013
oBaseView = osheet.DrawingViews.AddBaseView(otargetDoc, oPoint1, DrawingViewScale, kFrontViewOrientation, kHiddenLineDrawingViewStyle, "Default")oDraftView = osheet.DrawingViews.AddAssociativeDraftView(otargetDoc, oPoint1, DrawingViewScale)
I have one base view and one draft view created all at point1 with the same scale. It seems to me the base view's center is at point1. But not that of the draft view.
Just wondering how to overlay them to looks like one view with the same origin point. Or what coordinate I adjust, so I can draw on draft view, but looks like I was drawing on the base view?
Some additional lines are needed in drawing but can't get from projection of a model.
View 1 Replies
View Related
Nov 5, 2013
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
View 3 Replies
View Related
Jan 15, 2013
find a good way of standarizing my photos for colour value measurements (mean and SD from the histograms in Photoshop).
This is my problem:Variation in the birds in the photos (e.g in the crown, different colours)variation between photos, independently from variation among the birdsvariation within the photos (the amount of light varies in different areas of the same photo)
How do I standarize for variation between photos for the influence of ambient ligth of the specific area of the photo I want to measure? (e.g crown of the bird)
I need to be able to withdraw the comparable colour measurements from different photos (and its too late for a better method for actually take the photos.)
I have tried to use the white background (going down to pixel level, avoiding the orange grid and dirt) and the yellow post-it note as points to standarize, but that didnt work.
Technical info:
- I use Adobe Photoshop CS6, updated this week
- On a Windows 7 Home Premium computer
- Uploading the images as NEF-files and saving them as psd-files
- RAM: 4,00 GB (3,84 GB uasable)
View 2 Replies
View Related
Dec 31, 2011
I create 16x16 pixel icons for use in my mapping software. I notice, when picking colours from the colour palette and dropping them into my grid using the brush tool, the initial colour is not its full intensity and that it is increased each time I click the mouse. This resulted in different hexadecimal values for each pixel square, which is unacceptable for my purposes. However, I discovered while writing this post, using the pencil tool drops the full colour intensity into the square. Now I am curious to understand why the two tools operate differently and how one knows, if using the brush tool, when full intensity is reached.
View 2 Replies
View Related
Jun 26, 2012
In Illustrator CS5 calligraphic brush could be decimal e.g. 0,5pt size as on the screenshot:
But new Illustrator CS6 always rounds the value to integer.
The appearance of the brush seems to stay the same but it becomes impossible to change it anyhow.
Is this a bug? How can I use my previous brush settings?
View 7 Replies
View Related
Oct 19, 2012
When creating Views in .ipn files, using View Reps from .iam files, you get "Options" window where you can check Associative box, or leave it unchecked. How do yo get back to this window once the view is created?
View 6 Replies
View Related
May 21, 2013
I have a problem with one of my Inventor DWGs.
It seems that whenever I save the associated model, there is a chance that it ruin the drawing by scattering views, dimensions and sketches randomly.
View 2 Replies
View Related
Oct 5, 2011
We recently started using Inventor DWG files (shifting away from IDW).
Part of the process for one of our programmers is to open a DWG file using AutoCAD Mechanical 2012, delete all unused dimensions and views, and use the remaining view to program his CNC machine. We are finding that this is not possible to do with the new format Inventor DWG files, as the views are not able to be selected.
What is the AutoCAD 2012 procedure for deleting views created with Inventor DWG?
View 9 Replies
View Related
Aug 10, 2012
I want to extract 2D drawing view of the attached model. I tried but could not succeed because most of the sketches are on the angled user defined work planes.
See the following links, I did the same for some of my other models:-
[URL] ...
[URL ...
How can I show the modelling process of this model with 2D drawings?
View 1 Replies
View Related
May 20, 2012
I create muliti solid parts. In the .idw view I want the section views to have same colour as the model. Is it possible?
View 6 Replies
View Related
