In Illustrator CS5 calligraphic brush could be decimal e.g. 0,5pt size as on the screenshot:
But new Illustrator CS6 always rounds the value to integer.
The appearance of the brush seems to stay the same but it becomes impossible to change it anyhow.
Is this a bug? How can I use my previous brush settings?
Is it possible to automate the rounding of font sizes if they are in decimal form? I have a few thousand files I have to prepare for upload and they can't have font sizes such as 8.214 which several do. With AppleScript would it be possible to identify and then round up or down such font sizes?
View 2 Replies View RelatedI create 16x16 pixel icons for use in my mapping software. I notice, when picking colours from the colour palette and dropping them into my grid using the brush tool, the initial colour is not its full intensity and that it is increased each time I click the mouse. This resulted in different hexadecimal values for each pixel square, which is unacceptable for my purposes. However, I discovered while writing this post, using the pencil tool drops the full colour intensity into the square. Now I am curious to understand why the two tools operate differently and how one knows, if using the brush tool, when full intensity is reached.
View 2 Replies View RelatedI am struggling with color variation between different documents in AI. Even when both documents have been assigned the Adobe 1998 RGB color space, and colors are identically called out in RGB, my output varies between the documents. This is difficult as when I do color management is a "swatch" document to get my client approval, then insert that color into a different document, it changes. Any input?
View 2 Replies View RelatedI am using illustrator to edit a sketch. But, this problem alwasy happens. I normally use the 3 pt round brush and set the size to about 0.15pt. Well, If i use a different brush and switch back to the normal paintbrush it would always chang it to 1 pt and I would have to make a stroke and set it back to 0.15 pt. Is there a reason why it keeps doing this?
Also, is there a way to erase without it editing the entire path? I know I am using vectors but I don't understand how to fix this. URL....
There is one elementary thing about Illustrator CS6 that I don’t understand. Do the following:
-Select Pencil Tool. Make three strokes at random and select them.
-Apply a brush to them, for instance a Calligraphic Brush 5 pt. Oval.
-Deselect the strokes.
-Doubleclick the same brush on the Brushes Panel in order to edit it.
-Choose Preview to see changes.
-Change the brush size to 20 point. The three strokes will change in size, as they are supposed to.
-Click OK. A warning dialog box appears. Click Apply To Strokes.
Now what happens? THE CHANGES DO NOT APPLY TO THE STROKES. They turn back from 20 to 5 pt. Why? Try, on the other hand, to make the entire procedure without selecting Preview. Now the process runs perfectly; the change to 20 pt. is applied to the strokes. My question is: why does Preview spoil the process?
I used to use illustrator on windows and i had sized 0.1 and 0.35 available. Now that i've transfered to mac I only have 0.25, 0.5 and upwards.
View 3 Replies View RelatedI know in the brush options panel you can enter a brush size in millimetres, but is there any way to permantly make it display the size in mm? I need to know how thick some lines are in mm, and even after going to options and changing all diplay uints to mm, it still shows up as pts.
I've attached a picture of exactly what I'm referring to below. (The "Size" field currently showing "15 pt". I need that area to display mm).
On digital tutors i learned that the blob brush size can be changed interactively. But since i use a mac in combination with a cintiq and a swiss german keyboard i cannot use the bracket keys.
They also don't work when i assign the us keyboard settings. How can the brush size of the blob brush be changed interactively?
I'm currently using my created brush and when I try to use the basic brush, it immediately jumps back to my created brush with it's stroke size.
Align to pixel grid is turned off so it cant ber that.
I used to resolve this problem (when I was actually trying to keep using my created brush when it was reverting back to basic brush) but I would resolve it by double clicking on the designated brush in the brushes palette.
Also seeing as were on the subject of brushes, nop matter how I adjust the firmness/ pressure both in the driver setting of my wacom and for the brush in illustrator, I see no difference?
I am creating an image of 150mm x 100mm at 300dpi but photoshop keeps adding decimal points like 150.02 when i change the image from the original size, is it something I am doing wrong or a known bug? You would expect that when you change an image to 150 x 100mm it would stay at that size and not be added to.
View 2 Replies View RelatedIn Illustrator I want to maintain the stroke settings while creating several paths with the pen tool. However, every time I start a new path, the stroke settings revert to what must be a default. E.g. I set 16pt + Variable width profile + Basic and stroke a path. When I start a new path, the settings revert to 1pt + Uniform + Basic, and I have to reset back to my original. Other art programs I've used maintain the tool settings most recently used until they are manually changed. How can I get the settings to stay through multiple uses of the pen tool?
View 4 Replies View RelatedI’m a PS user new to Illustrator (CS6). In PS, using the bracket keys [] to increase/decrease brush point size will simultaneously update the data displayed in the tool panel at the top.
While I can use the bracket keys in Illustrator to change the appearance of the brush stroke, it is not being updated in the tool panel input or in the stroke window…so I can essentially have (2) 3 pt strokes created with the same brush that don’t visually match but whose display properties DO match. Because I will be doing lots of editing I certainly don’t want to work this way.
1. original
2. doubled horizontal size of the line
I'm using scatter brush to draw multiple lines with random size and angle(image 1.), and trying to increase only the horizontal size(image 2.), keeping the interval the same. But when I do, the interval is also increased since 'Spacing' option follows the size of the base object. I could adjust and decrease the spacing value, but the problem is, spacing option cannot go below 1%. So if want to increase the line size and maintain the interval, there's no way to do it. expending then scaling could work, but that's not what I want.
The brush size on my paint brush and clone stamp are not working properly.
View 1 Replies View Relatedthe size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
The brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
I use a wacom tablet.
I have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).
View 4 Replies View RelatedI'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
View 4 Replies View RelatedI must make some Pie Charts at work, and the data is in a Excel file. Of course all Values are in decimal for a 100% value:
25,611,30,58,510,715,410,46,80,63,91,94,4
Now i realized, that Illustrator can't work with decimal? But that's wrong! The values are exactly 100 (%). Where the gap comes from? So i goggled it and find out, that this bug exists since CS2 (i have CC)! The wrong solution is to clear manually all decimal commata:
256113585107154104686391944
Then it works as usual, but this workflow is not a pro solution!A coworker made this datafiles in hours, and then another worker delete this again?
Is there a way to size without Illustrator CS6 rounding up? example, I need my document to be 3.625 x 2.125" to output a file to a printer and illustrator keeps rounding up to the third decimal 3.63, Is there any way around this? I found going back to CS3 works but all my files have conversion issues opening that far back.
View 3 Replies View RelatedI'm wondering if it's possible to change the decimal place accuracy to default to only rounded numbers i.e. 1mm instead of 1.325. I want EVERYTHING to snap to the nearest mm (Axis, Dimensions etc.) rather than 1.233 for example.
Yes, I can manually type into the dims / axis boxes everytime but thats a chore.
Illustrator CS6
I want to know if it is possible to get more than 2 decimal places in the Print Scale Percentage option box (as shown below)?
It seems to round to 2 and I would like to get at least 3 for better accuracy.
I have been using Illustrator for almost 10 years and have never run into this one. When enter a stroke weight on a line with a decimal point like .25 or 4.5 is keeps rounding the number up. For example I enter 0.75 and it makes it 1 point or I enter 5.5 and it makes it 6 point. Whether I enter the number manually or pick from the drop down (0.25, 0.5 or 0.75) it keeps rounding my strokes to even numbers.
View 2 Replies View RelatedI use the rotate tool to design gauges, like clocks, a lot. I hold the ALT button and click on the center of my drawing and then a window pops up to enter in what degree I want my object to be. Currently the decimal point only allows for hundredths, ex. 45.25 degrees. Is there any way to change this to thousandths or even higher, ex. 45.25125? I've attached a screenshot to show you what I mean.
View 3 Replies View RelatedHow do I get my brush size to be the sam size as the cursor. [URL]...
View 6 Replies View RelatedAny good way to convert decimal values to fractions for use in inch measurements? I have a script that works great but it returns values like 5.5638 and I'd rather it return the closest fraction answer like 5 9/16. 1/16ths would be great, but I'd settle for 1/8ths.
I started trying to come up with a large if with lots of > and < conditions, but it might be better not to reinvent the wheel.
for some reason when I change brush size by the pallette or the [ keys I only see the cross hairs with a dot in the middle. I've tried ctrl, alt shift to reinsate all settings but still do not see a visual representation of the brush size.
View 3 Replies View RelatedI'm having a problem with the Blob Brush tool where I can't change the basic brush to something else. Whenever I pick a brush I want and I try draw with the Blob Brush tool, the brush I picked reverts back to the basic brush. Here are screenshots:
I pick a brush that I like first
But when I start drawing with the Blob Brush tool, it reverts back to the basic brush automatically
Am I doing something wrong or is the Blob Brush tool only capable of using the basic brush?
As most of you probably know, Lightroom cannot properly deal with Nikon's Active Delighting -- it just "ignores" the information, whereas vendor specific software interprets that information. Since vendor specific information can later on redo the ADL development process which usually happens inside the camera the necessary information must somewhere be preserved.
Most metadata-editors know settings like ADL off, moderate, high, etc. But that cannot be all there is. I noticed that my D7000 varies the under-exposure (1/3 EV -> 1 EV) in the same ADL-setting. What I'm looking for is exactly that amount of under-exposure (or a value from which I can derive that).
find a good way of standarizing my photos for colour value measurements (mean and SD from the histograms in Photoshop).
This is my problem:Variation in the birds in the photos (e.g in the crown, different colours)variation between photos, independently from variation among the birdsvariation within the photos (the amount of light varies in different areas of the same photo)
How do I standarize for variation between photos for the influence of ambient ligth of the specific area of the photo I want to measure? (e.g crown of the bird)
I need to be able to withdraw the comparable colour measurements from different photos (and its too late for a better method for actually take the photos.)
I have tried to use the white background (going down to pixel level, avoiding the orange grid and dirt) and the yellow post-it note as points to standarize, but that didnt work.
Technical info:
- I use Adobe Photoshop CS6, updated this week
- On a Windows 7 Home Premium computer
- Uploading the images as NEF-files and saving them as psd-files
- RAM: 4,00 GB (3,84 GB uasable)