I have a piece of steel from the content centre 165mm long. The balloon (stacked format) quantity reads 165.000mm. I've had to format the parts list to get rid of the decimal places but I can't find a way of getting rid of them in the balloon. Any format setting somewhere?
View 4 RepliesUsing Inventor 11...How do I change change the balloon (item 40) to read qty of 2? There are 4 total in the assembly, but this particular balloon only shows where 2 are, and another item 40 balloon will show where the other 2 are.
View 9 Replies View RelatedIs there a way to set the decimal place for the columns in Autodesk Inventor 2011? I have a length column I am trying to use for the p/n but I need it to be 2 places and they show up from zero to 4 dec places. I have set it inside excel but it never retains the setting.
View 9 Replies View RelatedThis happens every time I save as to dwg, it's very annoying.
View 3 Replies View RelatedI'm trying to change the value of the qty in the bom using ilogic with this expression
ThisBOM.OverrideQuantity("Model Data", "Steps", "QTY_STEPS")
but it gives me the following error
Conversion from string "QTY_STEPS" to type 'Integer' is not valid.
At center line I want to place a small perpendicular line in specific length and put their coordinate to excel sheet(export coordinates).
I have already two programs for this, one for placing objects on curve with specific length and 2nd for pick & export coordinates to excel or other type of file. but this is very lengthy process & need too big time. but I think it cab be done in a single command written in lisp.
Our Autocad parts lists used to calculate the weight of parts times the quantities. Now we are using Inventor and I see that the weight shown on a parts list is the weight of an individual part - although the quantity could be 2 , 3 (more than one). Is there a way to have the total weight shown equal to MASS times ITEM QTY?
View 1 Replies View RelatedIs there a way to control what the Base Quantity is in Document Settings using iLogic. I want to be able to use a form to change it to a parameter I have created.
View 6 Replies View RelatedI would like to obtain, in a structured parts list, the total number of ITEM in the sub-assembly.
See the picture attached for the example.
I have found an iLogic rule to create an user ipropertie in each part, with the total nomber of this part in all the assemby (included all sub-assemblies).
I would like to know if it is possible to obtain the total of this part only in the sub-assembly. Is it possible with an iLogic rule or VBA ?
I am having a bit of trouble with my "Parts List". What I want to be able to do is show the top level assembly quantity in my part drawing. From our fabricators point of view it would be eisier if they could open/pick up a part drawing and see the total quantity needed to be produced before looking at any assembly drawings. So they could produce all individual parts then grab what they need to produce sub-assemblies. I would like to do the same for my subassembly "Part list" where I would show the total need to produce my final assembly.
So far I can only show my quantity as 1 in the parts list for a single part or subassembly, or use a static value and add the quantity by hand which can change through our design/re-design process, not to mention be extremely time consuming.
How can I have a component from the content library have its 'BASE QUANTITY' default to 'EACH' when I bring it into my assembly? Each time I have to reset this to 'EACH' when inserted into my assembly.
This happens in either frame generator or just placing from content center.
I've attached a sample part & drawing of a hollow cylinder with 6 equally spaced radial holes drilled around it.
If you change the depth of the hole you will get a different quantity of holes in the drawing hole note.
I get a hole note quantity of 6 holes which is correct if I set the hole depth to 1". Change the hole depth to 2" and the hole note quantity shown changes to 5. Change the hole depth to 3" and the hole note quantity changes to 4.
I often draw bushings with radial holes like this and have to take care to not let this behavior create a wrong drawing.
Im trying to generate a list of parts and assemblies that has all the quantities included in it.Ive found that if i use the structured view it does not multiply the part count by the number of assemblies, so if i export the bill of materials i wont get the actual number of parts that i require.
If i use the parts only list then it wont include the sub assemblies.the job that im working on has hundreds of sub assemblies and thousands of parts so manually adding them up is not an option.Using Inventor 2014 Pro.
I need to change the Base Quantity of family templates in CC from GL = ... to Each. (I know there are several different qty, but I need this to Each because of ERP-system).
I use open from CC and place a tube in an iam, and changing BOM-settings to Each on that tube. Then I replace template in the family in CC editor with this file. And everything seems OK.
When I use "Place from CC" and place a tube from this family, everything is in perfect order. The ipt has Base Quantity set to Each just like I wanted.
I use Frame Generator and insert tubes from this family, then the Base Quantity "bounce" back from Each of GL = ...
I need this to work also in Frame Generator.
My customer is having trouble with the part list feature inside the Inventor 2D drawing.
For example, He has a car assembly file with 4 wheels and alot more subassemblies, then he creates a view representation which only visible for 1 wheel.
When he generates the part list in Inventor 2D drawing, he go to part list >filter setting and set to ‘’Assembly view representation’’ but the quantity for the part list is still showing as 4 as per attachment.
change the value manually inside the part list table?
I would like to make use of " find in feature tree" feature, but in DWG mode; Right clicking instead in BOM on part # and showing (highlighting) the balloon in the DWG so you know where it is that you put your balloon.
View 1 Replies View RelatedI am putting balloons on an assembly drawing, but the circle is not appearing. The arrow, leader and number are there, but no circle. What could be wrong?
View 4 Replies View RelatedIf you're displaying the part number in a balloon, is there any way to truncate what is shown?
e.g., I have a part number "abc12xyz89", and want the ballon to display only "xyz89".
I am preparing a weld map for our welding shop, and they would like me to balloon each joint and create a table with each joint's number, so that the welder/pressure tester can sign off. Is there a way to balloon joints and not parts, or make a custom ballooning scheme?
View 1 Replies View RelatedI created a hatched sketch on one of my views to represent filler material. I want to balloon to this hatched area, but it want grab it. I have the filler material setup as a custom part. I can also create a sketched symbol for this, but it doesn't appear that they would accept it either.
I am currently running Inventor 2010 Build 272, Release: 2010-sp3
I am trying to modify the code Brian Ekins posted on Mod the Machine to renumber balloons across sheets. [uRL ....
It works great unless the item on the additional sheet is a sub-assembly. I believe it is because PartDef is declared as a PartComponentDefinition and there is nothing in the code to handle an assembly.
Dim partDef As PartComponentDefinition
Set partDef = drawBOMRow.BOMRow.ComponentDefinitions.Item(1)
partInfo(I - 1).ReferencedFile = partDef.Document.FullFileName
The Set partDef line was giving me a runtime error when it came to an assembly in the BOM until I added
"On Error Resume Next" at the start of the loop.
I tried changing the declaration to ComponentDefinition. It compiled fine, but didn't do anything. I think I'll have to add some duplicate code to handle an assembly in the BOM. Is there a better way to do this? Am I even on the right track?
How do I attach text to a balloon? For example, I want to add the text "2X" alongside the balloon to denote that there are 2 instances of this part.
I can't believe that you need to make a text box each and every time you need to do this! There has to be a simpler way.
If a balloon style is set to "Linear" the text in that balloon is automatically left aligned. If a balloon style is set to "None" the text in that balloon is automatically center aligned.
Is it possible to create a balloon with the balloon style set to "None", and have the text left aligned in a drawing document. Typically the balloon text is more that one line . The new line in inserted by pressing ctrl+Enter in the override value of the balloon.
I dont know if this is possible but what i am trying to do is create a custom detail ballon & outline similar to what is attached. this is how our client wants it to look & currently we create the detail & then sketch the outline & add a sketched symbol which has the identifier. We then turn off the detail layer which has the default outline.
View 1 Replies View RelatedWhen im replacing the balloon arrow it turns into a black dot. Pretty annoying to change all the dots to arrow everytime.
View 4 Replies View RelatedCan you attach text (qty or other info) to the side of a baloon or a point on the model view? If so can the qty update automatically?
View 3 Replies View RelatedI have an issue when using Auto Balloon.
Lets say for e.g. that I have 12 parts within an assembly, once auto balloon has done it’s job you notice that No. 9 balloon is blank and No. 10 balloon only shows 1 and not 10.
I'm using balloons to get information from parts, then writing that part info to a custom table. I need to keep track of which balloon corresponds to which table row.
Is there some object/property of Balloon where I can store a single number or string? I'm already using the value field, so that's unavailable to me.
Also, one balloon corresponds to one table entry. That means I cannot create a custom iProperty in the part the balloon is attached to since more than one balloon may reference the same part.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
I am trying to create & connect a Sketchedsymbol to a balloon. I was able to create the sketched symbol but, i was not able to connect to balloon.
The code is as below
Public Sub AddBalloonAnnotation()
Dim oGetPoint As New clsGetPoint ' custom class object
Dim oClick As Point2d
Dim DrawDoc As DrawingDocument
Dim oActiveSheet As Sheet
[Code] .......
is it possible to create a custom symbol for my balloon?
View 2 Replies View RelatedIf we can access the Auto Balloon Command using Inventor Drawing API.
View 6 Replies View Related