AutoCAD Inventor :: Use ILogic To Change Base Quantity?
Nov 9, 2011Is there a way to control what the Base Quantity is in Document Settings using iLogic. I want to be able to use a form to change it to a parameter I have created.
View 6 Replies
ADVERTISEMENT
AutoCAD Inventor :: Change Base Quantity In Family Template In Content Center
Feb 8, 2013I need to change the Base Quantity of family templates in CC from GL = ... to Each. (I know there are several different qty, but I need this to Each because of ERP-system).
I use open from CC and place a tube in an iam, and changing BOM-settings to Each on that tube. Then I replace template in the family in CC editor with this file. And everything seems OK.
When I use "Place from CC" and place a tube from this family, everything is in perfect order. The ipt has Base Quantity set to Each just like I wanted.
I use Frame Generator and insert tubes from this family, then the Base Quantity "bounce" back from Each of GL = ...
I need this to work also in Frame Generator.
AutoCAD Inventor :: Content Library - Base Quantity Default To EACH
Aug 8, 2012How can I have a component from the content library have its 'BASE QUANTITY' default to 'EACH' when I bring it into my assembly? Each time I have to reset this to 'EACH' when inserted into my assembly.
This happens in either frame generator or just placing from content center.
AutoCAD Inventor :: Override Quantity Using ILogic
Jun 20, 2013I'm trying to change the value of the qty in the bom using ilogic with this expression
ThisBOM.OverrideQuantity("Model Data", "Steps", "QTY_STEPS")
but it gives me the following error
Conversion from string "QTY_STEPS" to type 'Integer' is not valid.
AutoCAD Inventor :: How To Change Balloon (item 40) To Read Quantity Of 2
Nov 17, 2009Using Inventor 11...How do I change change the balloon (item 40) to read qty of 2? There are 4 total in the assembly, but this particular balloon only shows where 2 are, and another item 40 balloon will show where the other 2 are.
View 9 Replies View RelatedAutoCAD Inventor :: Creating A Base View With ILogic
Oct 18, 2013I kept the code simple
fname = ThisDoc.FileName(False) 'without extension fpath = ThisDoc.PathoPartDocPath = fpath+""+fname+".ipt"oPartDoc = ThisApplication.Documents.Open(oPartDocPath, False)oDrawDoc = ThisApplication.ActiveDocument oSheet = oDrawDoc.Sheets.Item(1)oTG = ThisApplication.TransientGeometryoPoint1 = oTG.CreatePoint2d(5, 5)oBaseView = oSheet.DrawingViews.AddBaseView(oPartDoc, oPoint1, DrawingViewScale, kFrontViewOrientation, kHiddenLineDrawingViewStyle, "Default")
it is a local rule in an idw file that has been saved with an ipt file of the same name saved in the same directory. Now I get the most useless error message ever devised by manking
"The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))"
AutoCAD Inventor :: Sheet Metal ILogic Rule Not Executing On Non-rectangular Base Sketch?
Aug 5, 2013I have a template that I have created, in it I have a rule that changes the stock number and description based on which sheet metal rule is selected. The weird thing is it works correctly if the first sketch is a rectangle. If you sketch a circular shape and make that the face it will not work. It blanks out the values for the stock number and description.
I'm running Inventor 2014 update 2.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 33212 StartFragment: 314 EndFragment: 33180 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimiPropValAsString=""
DimiPropDesAsString=""
SelectCaseSheetMetal.GetActiveStyle()
[code]...
AutoCAD Inventor :: Change Base View
Jan 24, 2013I was wondering if there was a way to change the model my base views were linked to.
If I wanted to link the base view to a different model, would this be possible.
When I double click on the base view it shows the file path for the model that is currently chosen; however, it is all grey and I am unable to edit it or choose another file path.
How to change this? Is this even possible? Is it because I have annotated the drawing view that I am unable to change the model path?
AutoCAD Inventor :: Change View Base
Dec 7, 2011what could have happened in an assembly when I've changed the cube front view (3D)? The projection has changed automatically (the view) in 2D. In other assemblies didn't happened the thing I've mentioned before even if I did the same thing meaning that I've modified the front view but 2D stayed in the same projection.
View 1 Replies View RelatedAutoCAD Inventor :: DWG To IDW Change With Base View?
Apr 15, 2013We've got a new dwg template and we found that when we bring in a base view on a new drawing, the drawing changed to an idw format.
View 5 Replies View RelatedAutoCAD Inventor :: Change Drawing Scale With ILogic Upon Parameter Change
Jul 8, 2013I have a spreadsheet and iLogic driven mater assy to generate different iterations.
I would like to change the scale of a base view on a drawing based on a parameter in my assembly. The idea is to get iLogic to change the view using a simple If / Else statement.
This is what I tried:
If Parameter("0 Generic Assembly v2.2.iam.BP") < 1570 Then
ActiveSheet.View("VIEW1").Scale = 1/8
Else
ActiveSheet.View("VIEW1").Scale = 1/10
EndIf
So basically the value of "BP" parameter (excel parameter in my assy) would drive the scale of the views. But its not working. Is it actually a sensible method? Can I use in the drawing environment the excel parameters in my assembly?
This is the error message I get when the rule is run:
"Error in rule: View Scale, in document: 0 Generic Assembly v2.2.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))"
Also using the same thinking I use iLogic to populate the drg number field on the drawing based on an excel parameter. The rule works but does not always updates the drawing no upon the parameter change or update/rebuild commands.
AutoCAD Inventor :: Using ILogic To Change Parameter
Mar 26, 2013When I import a part from content center, a tube in this case, I get a length parameter called <PL>.
I am using this parameter in the parts lists, so it shows "=Outer diameter x thickness x <PL>"
However I don't want trailing zeros, leading zeros or units string to be shown.
I know I can open the parameters window, right click the parameter, then click custom property format and then uncheck these boxes and its fine.
But I want to know if there is a smarter way to do this, like creating a rule to execute on all the parts?
I have around 500 pipes with the parameter <PL> that needs to be changed.
AutoCAD Inventor :: ILogic To Change Sheet Name
Oct 31, 2013I've seen snipppets of code to get the Sheet name but is there a way to set it via code? I'm thinking it might be useful to set the sheet names to the chosen sheet format (as opposed to just 'Sheet').
I'm sprucing up my drawing template...
Rule #1 is for selecting sheet format (which title block/sheet size / orientation)
Rule #2 is for setting iproperty values to populate the titleblock with info. (if required)
Rule #1 was based on code from S.Bixler & inventortrenches
Rule#2 was based on more code taken from here.
AutoCAD Inventor :: Change Row Of IAssembly Using ILogic
Nov 11, 2013Issue between an i-assembly and i-Logic. So, I have an assembly that includes some extra components that are not always needed and therefore an i-Logic rule takes the decision whether these will be suppressed or not.
Of course this is not a problem however it turns out that I miss some info from BOM according to the suppressed parts ...and all these makes sense following the LOD etc.
A potential solution to keep up to date the BOM while you are excluding the needless components is to create
an i-Assembly.
To keep that simple I turned my current Assembly to an i-Assembly and very successfully I excluded various components and of course I included some others by adding extra ROWS.
So far So good
Now I want to apply some dimensional boundaries by using i-Logic rules. According to them I want to allow this i-assembly to jump among these different ROWS that meet the right criteria.
Very rough thoughts led me to the following code...
For example...
If Width > 600 Then
iPart.ChangeROW ("..." , "...") 'Row-1'
Else
iPart.ChangeROW ("..." , "...") 'Row-2'
End if
The Problem is that the above code works fine, for a example, in case that I will place an i-part in my assembly... However I am looking to change the row of the actual assembly that as I mentioned before I turned it to an i-assembly
To make this even more clear I want to be able to manipulate my i-assembly with i-Logic rules while this is open in Inv. I don't want to change rows while this is placed as a component or sub-assembly in an another assembly...
AutoCAD Inventor :: Change BOM Structure With ILogic?
Jan 8, 2014I'm using rules to control a part that I made. This part is available in steel and wood.
But steel = normal and wood is something we have to buy.
I would like to adjust my rule so that my material choice will effect the "Default BOM Structure"
I just can't find the right "code" to start with.
AutoCAD Inventor :: Color Change With ILogic?
Jun 27, 2012I am using Inventor 2012: I have a table with different part numbers. I want to create an iLogic rule to change the color of second solid body in my part for a specific part number.
This is what I did.
If iProperties.Value("Project", "Part Number") = "F22111796" Then
Feature.Color("plastic")= "Gray"
ElseIf iProperties.Value("Project", "Part Number") = "F22111796V" Then
Feature.Color("plastic")= "Gray (Dark)"
ElseIf iProperties.Value("Project", "Part Number") = "F22111796N" Then
Feature.Color("plastic")= "Gray (Light)"
Else
Feature.Color("plastic")="Gray"
End If
However it does not change the color of the second solid body when I make the part number active.
AutoCAD Inventor :: Using ILogic To Change An IPart Row?
Oct 25, 2012I have a sheet metal part that I converted into an iPart and I set up different rows with different sheet metal styles. What I want to do is run an iLogic code to change to a specific row which in turn would change the actual material of that sheet metal part....I've tried the snippet iPart.ChangeRow but cannot get it to run the code. I'm not sure if I'm not doing something right or what...
Inventor 2014, Windows 7, 64 bit
AutoCAD Inventor :: Change Hole Type With ILogic
May 21, 2013I would like to know if it is possible to use iLogic to change the Hole Type from Through to Tapped as conditions dictate. Is this even possible? I already have a backup plan but wanted to check out all possibilites before I proceed. Using Inventor 2012 SP2.
View 1 Replies View RelatedAutoCAD Inventor :: Change Part By ILogic In Assembly?
Jul 25, 2012Before using iLogic, I created lot of iAssembly and iPart. I could change iPart factory member when I need in iAssembly.Now, I want to move everything to iLogic.
how could I change the part by iLogic code?
For example:
I generated "Part1.ipt" and "Part2.ipt",...... (I have hundred of member)
In my assembly, sometimes, I need use Part1.ipt, sometimes I need use Part2.ipt.
Which is the iLogic Code I should to use?
Inventor 2009, WIN XP.
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
AutoCAD Inventor :: Change LOD In Derived Part Through ILogic
Jan 27, 2013I got this code earlier from Curtis_Waguespack, and i would like to add a setting... When i run this rule it Derives the assembly, but LOD is set to Master, i would like it to be set to my own (Configurator) LOD...
I don't seem to be able to find anything in this code, that defines LOD...
So far im doing ok with the standard ilogic code, but when it´s API or VBA code im lost.. which leads me to this.. i've been searching the forum back and forth to find a code that performs the feature "Shrinkwrap", and somehow everything i have found so far does not work... even the code example in Inventors help menu under programming, Therefore im trying to solve this with Curtis's code as staring point..
'set a reference to the assembly component definintion.'this assumes an assembly document is open.Dim oAsmCompDef As AssemblyComponentDefinitionoAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition 'define the path and file nameDim sPathandName As StringsPathandName = ThisDoc.PathAndFileName(False)
[Code] .......
AutoCAD Inventor :: Using ILogic To Change Model Tolerance
Jul 8, 2013I need to change one dimension using iLogic. It changes due to the path taken to manufacture the part. In a nutshell majority of the time the "OD" has a +.004 / .000 tolerance and the model is drawn at the minimum size. There are cases when the "OD" has a +.005/-.005 tolerance and is modeled at the nominal size. I've learned some of the iLogic to make the change I'm after but not all. I'm having trouble setting ModelValueType to change the model size.
See the code below, for setting +/-.005"
IV2012
AutoCAD Inventor :: ILogic Material Change Failure?
May 23, 2012The attached part has some bad work features on it, but I don't care about that (easy fix). It also contains a rule that simply changes the material from "P AND O" (pickles & oiled) to "201 S/S", for some reason the faulty work geometery causes this rule to throw an "unspecified error". If you delete the bad work geometry the rule runs fine.
View 2 Replies View RelatedAutoCAD Inventor :: Change The Position Of An ILogic InputListBox?
Aug 8, 2012We have one ilogic rule with different types of User controled boxes. 1x InputListBox 2x InputBoxes Both InputBoxes appears in the center of the screen. The InputListBox appears in the upper left croner of the screen. That's not optimal for the user This problem only occurs when I call the rule via .net program in the User Interface. The Problem does not occur when I load the rule via runRule in the iLogic Rule Browser.
View 2 Replies View RelatedAutoCAD Inventor :: ILogic Titleblock Textbox Change
Sep 10, 2013I am trying to change the titleblock definition of a drawing when I run my custom ilogic code. Currently (and for the past few years) the drawing name is defined by the drawing properties part number but when I run my code I would like the drawing name to be defined by the model properties part number as shown below:
Currently the textbox for the part number is configured as below:
And I'd like to change it to this:
The code I have to find the part number is as follows:
Dim x = 1 Dim oTxtBox As Inventor.TextBox For Each oTxtBox In oDrawDoc.ActiveSheet.TitleBlock.Definition.Sketch.TextBoxes If oTxtBox.Text = "<PART NUMBER>" Then oStuff =
[Code]....
AutoCAD Inventor :: Browser Name Using ILogic Particular Change To The Number
Jul 4, 2012I want my browser name using iLogic particular change to the part number. I fill in my iproperties, the part number. Then the browser name has to take over the part number.
But i get an error.
doc = ThisDoc.Document
Dim oCC As ComponentOccurrence
For Each oCC In doc.ComponentDefinition.Occurrences
OccName = oCC.Name
oCC.Name = iProperties.Value("Project", "Part Number")
Next
AutoCAD Inventor :: Change PL Header On Drawing Via ILogic
Apr 10, 2013I want to be able to change the header on a PL in a drawing using iLogic.
I'm able to "find" the PL(s) on a drawing but can't seem to figure out how to access the header property My goal to to change the header to show the P/N of the assembly/part it's created from.
My Current code is below:
doc=ThisDrawing.Document
oBOMs=doc.DrawingBOMs
For Each oBOM In oBOMs
MessageBox.Show("Found a PL", "Title")
Next oBom
In between the for/next loop is where I want to access the current BOM and change it's header depending on the related .iam/.ipt.
AutoCAD Inventor :: Change Pattern ILogic In Assembly
May 10, 2012Change pattern ilogic. How do you change the distance and quantity in an assembly with ilogic?
It is simple in a part but in an assembly the parameters and equations do show.
AutoCAD Inventor :: ILogic Rule To Change All Units?
Nov 25, 2012I am after a rule to change the unit type of all .ipts from cm to mm.
This has to go down to all levels in hierarchy but only change .ipt files
AutoCAD Inventor :: ILogic Change Assembly To Reference
Oct 26, 2011Is there a way to set an assemblies bill of material setting to reference through iLogic?
View 3 Replies View RelatedAutoCAD Inventor :: ILogic To Change Colors Of Parts
Mar 12, 2013I am looking for a rule that will search assembly down all levels and find .ipts with the material of plywood and when found change all plywoods to color Clear - Light.
View 9 Replies View RelatedAutoCAD Inventor :: ILogic Frame Generator Part Change
Oct 21, 2013I'm slowly getting there with iLogic, so I'm really just looking for the function / call to change one part from Frame Generator, to another part from Frame Generator.
Product Design Suite Premium 2014
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM