AutoCAD Inventor :: Assembly Color Changed To One Color
Feb 21, 2013
I am working on an assembly file with some different color components, the color of each component is set to AS MATERIEL. But suddenly the assembly color was changed to one color only, which is the same color as one of the component. I clicked each part, the color is still set to AS MATERIAL. I even can not undo it to change the color back.
And from now on, any part was placed to this assembly is changed to assembly one color. Inventor 2012 under Win 7 system.
View 8 Replies
ADVERTISEMENT
Nov 1, 2013
I am using Inventor 2014. I have an assembly where one parts has to be trimmed after assembly. When I do the cut in assembly, the part turns to a different color (black). My current view rep in assembly is Default.
View 2 Replies
View Related
Oct 14, 2011
I have a large assembly model made of many different parts. The last thing I want to do is "paint" it so I can make a drawing showing the different colors being used. My plan is to take the entire assembly and insert it into another assembly then just change the parts to the specific colors. I was wondering if there was a way to change the colors on multiple parts at once. Right now I right click the part go to iproperties and then go to occurence and choose the specific color. I know from using Solidworks that it works the opposite you click the color first and then all the parts that you want to be that color. It works out a lot quicker. If I select multiple parts the occurence tab in the properties is greyed out.
View 4 Replies
View Related
Jun 6, 2013
My part color is yellow. In the assembly It shows as gray.
I cant seem to get it to change to match the part color. I used to know why this happens and knew how to fix it but seem to have forgot. How do you get this to work?
I also recently loaded 2014, but had the same problem with 2013, so its not a release issue.
View 4 Replies
View Related
Jan 9, 2013
There are instances where we need to add an extrusion in an assembly (.iam) to show labeling that needs to be done on the floor during assembly.
So we do a new sketch to the face where we need to add the "label", we use text and extrude it 0.001" deep (cut).
On the drawing (.idw) you can see it no problem, but in the model (.iam) itself it's hard to see since the faces that result from the extrusion are the same color as the participant part.
My question is this: Is it possible to change the color of the face of the extrusion?
It's not super important but it would be a good thing to show that detail as we sometimes print a color version of the 3D view for prototyping, troubleshooting, etc.
View 9 Replies
View Related
Aug 14, 2013
Is there a way to have inventor make each part in an assembly have a different color? I like to work in assemblies like this because it is easier to tell the parts from each other. It's just time-consuming to go through and change everything if the assembly was designed with realistic colors. I am thinking there might be a macro for this, but I don't have much experience with macros so idk.
(extra brownie points if the method has the capability of reverting back to realistic colors)
Inventor 2014
HP Pavilion dv6t-6b00
Intel Core i7 2670QM
AMD Radeon HD 6490M
8gb RAM
Windows 7 64 bit
3Dconnexion SpaceExplorer
View 9 Replies
View Related
Feb 22, 2013
This one work:
If L(i) = 1 Then oOcc.RenderStyle = _invApp.ActiveDocument.RenderStyles.Item("Red")
If L(i) = 2 Then oOcc.RenderStyle = _invApp.ActiveDocument.RenderStyles.Item("Yellow")
But I want to change like this and it not work:
Lcolor(1)="Red"Lcolor(2)="Yellow"L(2)=1L(1)=2for i=1 to 2oOcc.RenderStyle = _invApp.ActiveDocument.RenderStyles.Item(Lcolor(L(i)))next
What's wrong?
View 2 Replies
View Related
Dec 19, 2012
I have a model part with colors assigned to different features but they do not carry over to the assembly model. The assembly first came up as all grey when our computers were upgraded to Windows 7, I have been playing with it and got some of the color back. I am new to Inventor and not familiar with how the colors work.
View 4 Replies
View Related
May 17, 2011
Concerning Inventor 2012...
We do a good bit of deriving parts from assemblies. We have a workflow that works well for us, we create PARTS, put them in an ASSEMBLY, then create new PARTS DERIVED from ASSEMBLY. We use Boolean to add/subtract and disregard parts as needed to create these parts. These parts are now given color and reassembled in an yet another final ASSEMBLY as needed and put into a drawing.
Through Inventor 2011 this worked well.
In Inventor 2012 the color is disapering as soon as any change is made on a source part.
1 Changing the color does not work.
2 In the derived from Assembly, opening up (in the browser) the individual .ipt's and right clicking and clicking properties and changing the color only stays until the next change to the source prt.
3 Changing EACH individual face by right click, properties and setting the FACE PROPERTIES from "as feature" to "as part" does work, but is ridiculous to change hundreds of faces on each part. (especially considering we did NOT need this step in 2011)
Is there a switch in the registry (to turn off the standard “as feature” to the parts face).
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
View 9 Replies
View Related
Apr 21, 2011
I am exploring the possibilities of content browser of AutoCAD 2012 and came across a contrast issue. The thumbnail background color is white and the lines are as drawn. (Drawing with black background)
Is it possible to change the Thumbnail Background color to black to get a better preview.?
View 9 Replies
View Related
Jul 24, 2013
I have few text labels and lines in a drawing that supposed to have black color.
However, color at some point changed to grey.
Color- by layer, transparency- by layer, viewstyle- 2D Wireframe...
The thing is if I double click on a text it turns to black but after regenall it turns to grey again!
Already did restart and everything. Looks like there is maybe some variable for color control, I don't know.
View 5 Replies
View Related
Nov 21, 2013
For a B&W photo, can the selecting color be changed to say red?
View 3 Replies
View Related
Sep 11, 2012
My color picker has changed from the normal default to a totally different one. How to change it back?
Below is a picture of what it has changed to. I used to have the default one with White top left Black Bottom Left and the certain colour top right.
I cant get used to this one!
View 2 Replies
View Related
Dec 14, 2012
I've set up a customized color space, named it and saved it. The one pref I always change is that I work in Adobe 1998. So I'll be working in PS and then see that when I go to save an image, the box checked at the bottom of the Open/Save dialog is sRGB. I go the the color space dialog and low and behold it says North American General Purpose. How did it get switched?
View 4 Replies
View Related
Jul 12, 2006
When I was working in photoshop I suddely changed the colour around my workspace, from default grey to purple..dont ask me how I did it I dont know.
View 4 Replies
View Related
Apr 29, 2005
color picker has stopped giving me the slider with the full range of colors, and is instead just allowing me to peruse a few colors at a time. I can still access the full spectrum, but have been using PS for 8 years with the same setup. I'm using PS 7.
View 3 Replies
View Related
Jul 17, 2007
I have just opened up Photoshop CS2 and the default layer background colour has changed!! How I do not know. It seems the white colour has disappeared and been replaced by a cream colour. Even if I select #FFFFFF for white, it stil only gives the cream options. Even clicking the little black and white squares in the tools window, just corrects to this cream colour.
View 2 Replies
View Related
Dec 3, 2012
I'm currently working on a vector in the trial version of Photoshop CS6 that I acquired this Friday(?), and I'm running into a troublesome dilemma every time I re-open the file to work on at a later date. I find that some layers -- not all, but maybe five or six -- have changed their color to whichever color is in my palette, or whatever was in my palette the last time I opened Photoshop.
Is there a setting I'm missing, or is this a current glitch in this version of CS6? And in case you're wondering, yes, I have tried saving with all shape layers locked before I close; it made no difference.
View 7 Replies
View Related
Jun 27, 2008
For some reason, my colour picker appears to have changed into a format that I do not necessarily get on with.
Any ideas how to get it back to normal?
View 2 Replies
View Related
Sep 8, 2004
I have a drawing of my car that is purple and would like the color to be changed back to green the same color as my car. (Red, Yellow and Blue would be cool too. Just change the Blue bumpers/bars to Black).
View 9 Replies
View Related
Jul 23, 2012
I'm used to having my color picker look like this: [URL] ...
Then one day, it changed to this and I would like it to go back to the default as seen above. [URL] ....
View 3 Replies
View Related
Jan 29, 2014
Pencil remains black no matter what forground color I have... There must be a simple setting I am missing.
View 1 Replies
View Related
Feb 25, 2014
I recently decided to use LR to catalog all my images (instead of Bridge). I love that PNG is now supported. Ran into one problem...all the snowflake and white frame images are viewed as a white rectangle due to the background white. I know Preview and other "viewers" don't have this issue. ACDSee has a setting to change the background. Can I do this in LR5? If not, is there a link where I can submit for a product enhancement to the Product Management team for a future release of LR?
View 3 Replies
View Related
Mar 12, 2013
I'm having issues with parts that were drawn in 2012 being a different color in 2013. It's the same color just a noticeably different shade. Not all parts have this color difference.
It only does this on certain parts so I when I have a bunch of the same parts mated together in an assembly it renders out with different shades and looks goofy.
See pic attached - All piping is Dark Grey in color - The verticals right below the top valves are a different shade - When I check both colors in the part files they are listed as Dark Grey.
View 9 Replies
View Related
Sep 1, 2013
I changed the mode of a RGB image to HSB color model then copy and paste hue channel as a layer to the original RGB image ...After changing the blend mode of the hue layer to the hue blend mode..I can't see my original RGB image.
View 2 Replies
View Related
Dec 14, 2011
Corel SP1. I now have toolbars I can see clearly, but the black background makes it impossible to tell if an image has a thin black perimeter border. Last release I could drag the window to size it larger than the image and it was easy to see. The attachment shows the trouble and I can't find where or how to change just the background color of the work surface without changing the color of the workspace that now works best for me.
View 1 Replies
View Related
Feb 19, 2013
when to use my coreldraw x4 today and all my colors have changed from a nice palette of distinct colors
To the same palette but it seems that the colors have no definition . e.g. all the dark navy blues and deep dark clarets . deep heritage greens all show up as one generic black with
No distinction between the colors when placed next to each other . all just show as black . Even when i export as a JPEG for e.g. they all still show as black .
only thing i can think of is that my computer upgraded over weekend . automatic updates. I spent a lot of time selecting colors for my jobs i have currently going . A range of entertainment posters with a carnival theme and old school heritage colors.
View 1 Replies
View Related
Apr 29, 2013
I am using 3ds Max 2012 to create some simple freeway directional signs for my experiment. I succeeded to make a panel but when I export it, the color has changed for some unknown reason. It looks like an additional white layer applied on the surface (In the yellow box in the attached pic).
Any suspicious check options I can try?? I really need to do this right..
View 4 Replies
View Related
May 31, 2011
We hit a weird snag. All our text used to be 100% black (c=0 m=0 y=0 & k=100) On opening files the black is now a mixture of CMYK.We changed default color profiles last week. Could this effect all files? f so - what are the original clr setting for Coreldraw X5 or how can we reset them?
View 1 Replies
View Related
Jan 18, 2013
I have two cylinders, same material, same color but they does not look the same (see attached). One is more glossy than the other.
I have cleared the appearance and added the color and material again but no difference.
View 6 Replies
View Related
Sep 23, 2012
When in brush mode, clicking "ctrl" switchs to color picker until yourelease. Is this shortcut editable? What if I want this to be set onAlt instead, for instance?
I could not find any shortcut which looks like it would do this in thekeyboard shortcuts list. Is there one? How to change this shortcut?
View 1 Replies
View Related
