Im having trouble animating an assembly i made. It is a twin cylinder foot pump for car tyres, nothing special. When i try and animate it i have trouble getting the pump to move. When trying to animate constraints it doesn't like it and parts move about all over the place. I've also tried animating parts and this doesn't work either.
View 1 Replies
How to animate a spring from compressed to decompressed and back again stages in Autodesk Inventor 2010.
View 6 Replies View RelatedI am looking for a model of an engine to create an assembly animation. I do not need any specific details, just a working model with all of the parts neccessary.
View 9 Replies View RelatedWhen I record an animation in .avi using the Drive Constraint command here's what pops :
-The codec you selected to compress this AVI video stream cannot handle the current screen color depth and/or the graphics frame size. Please try another codec.
-Then I press OK and it records but the AVI file is empty and no video is watchable.
What can I do?
I'm using Autodesk Inventor 2012 ans a windows 7 64bit brand new computer with Nvidia graphic card.
I have an assembly inside of Inventor Studio. One of the parts inside of the assembly has a parameter that I would like to animate. When I select the "Parameters" function within the "Animate" tab on the ribbon, I get an error:
"There are no favorite parameters defined."
This worked fine when I tried the same thing with only the part inside of Inventor Studio, but not when the part is included inside of an assembly.
I am fairly new at animation. If I want to simply create an animation of an assembly just simply rotating in 3D space which I then can import in Showcase for a presentation, how would I do this in Inventor?
View 4 Replies View RelatedIs there a way to switch off the animation when creating joints in the assembly environment.
View 2 Replies View RelatedI have created an assembly then the positional representations . When I want to animate them according to the process , the assembly Positional representation does not animate.
View 1 Replies View Relatedproblem when manually animating a model ratchet and pawl mechanism in an assembly file. One can get the pawl to track the ratchet wheel surface OK but there seems to be nothing to stop the ratchet wheel going in both directions, contrary to real life experience. I have used transitional constraints to link pawl surfaces with ratchet wheel surfaces but there seems to be no drive constraint which will operate in this circumstance.
View 5 Replies View RelatedI am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedWe have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedCan I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies View RelatedMy Assembly has two possible positions for my piston.
I would like to show both piston positions (top and bottom) in one drawing file; however, in different drawing views.
I have tried using LOD and Drawing View Representations, but it is my understanding that neither of these are meant to be used in this way.
I wanted to add an extrusion to an asembly. I was able to highlight the required geometry and create the feature, but is not showing up. In the browser, there's a red "up arrow" beside it. Why is it not showing?
View 3 Replies View RelatedI am in Inventor customization using VB.net as development language.
There is one issue which is troubling me from some time.
Is it possible to identify the name of parent assembly of part/sub-assembly.
For Instance there is a Sub-Assembly/Part, how can i identify the parent assembly using VB.net without opening that assembly.
Is there any way to get an area for the entire assembly on the BOM? If you go to i Properties --> Physical it is shown there. But how to pull it from there and have it as Column in BOM? Can it be done using API ?
View 2 Replies View RelatedI'm working on some vb.net code which updates the sizes of parts within sub assemblies and then selects the correct sub assemblies to place and constrain into a larger assembly.
When I run my software all the sub-assemblies should open, resize and then get placed into the larger assembly.
This code works up to a point. However I'm having some trouble when one of my sub assemblies is placed and constrained into the larger assembly - Inventor crashes.
If I step through my code line by line, it works fine. I think that this is because Inventor has more 'time to think' about what it is doing between placing the sub assembly and constraining it (updating the parts i guess).
After discovering this I wrote a line in my code which uses the vb.net stopwatch class to wait 20 seconds between installing the part and constraining it, this allows everything to work without Inventor crashing.
What I'd like to know is if there is a command i could use in vb.net which would allow me to wait for the sub-assembly to be ready to be constrained rather than waiting 20 seconds? Although this works I don't think it's the 'correct' method of doing things.
I'm using Inventor 2011 SP1.
I want to add dimensions in an assembly through VBA ,but all my work is just in vain . Now I can add dimensions one after another ,but I want to finish dimensioning in the assembly once for all .
View 1 Replies View RelatedHow to save an assembly as a new file, in a new location, and not have it update when the individual parts are modified? I need to be able to track the revision history of an assembly, and be able to revert to an assembly, as it was, at any time. I tried pack and go, but the sub-assemblies remained parametric, and reflected the current state. I would like to have file a1.iam, file a2.iam and file a3.iam, all using the same part or sub assy files, and not have them change when I create file a4.iam.
View 5 Replies View RelatedHow do I add a background to my assembly?
View 6 Replies View RelatedIs there a way to extrude a cut through an assembly but only cutting the parts I want cut? I am using Inventor 2012. Basically I want to use a part in the assembly as reference for the cut. But I do not actually want to cut that part only the surrounding parts.
View 4 Replies View RelatedI use the "M" measure command a lot, Is there any other good ways to dimension in assembly? I often need to know the distance between the edge of a part and another based on a fixed view, which if the two edges are straight and on the same plane works ok but I need to measure the height of two parts which are on different planes or the distance between arcs and curves as these tend to always work from the centers?
I need a command that will basically fix the plane to the current view to get the required dimensions, is there anything available?
Look at the attached snips. The assembly icon is strange to me. and I can not
set it as a contact set because it is greyed out. Is there any way to set this as a contact set?
Inventor 2012
