Is there a way to make the Relationship folder in the browser stop expanding. I am constatnly having to clcik to collapse it when I lock/unlock a view rep or change VR.
View 5 RepliesEvery time i open the view rapp folder the relationship folder will open too. If i will close the relationship folder...and open again the view rapp then it repeats.
The problem is that my assemblies has many parts an a lots of constraints...so my browser is quickly full of constraints visually. I use a lots the view rapp...so there is away to maintain the relationship folder closed ...or open only when i will click on it?
I am working with my view reps in my assembly and every time I change, or lock one, the stupid Relationships folder expands $%*#@. any way to prevent this?
View 1 Replies View RelatedI dont know why, because I never had this problem before, but I am bending an object and the bend command is distorting the circle I made as a pivot point.
View 1 Replies View RelatedI'm looking for some direction to follow to modify an existing design. I am trying to thicken left and right walls in order to make the inner section narrower. However, none of my attempts have been successful. I am not looking for learning materials for CAD, but rather a solution to this specific problem.
View 3 Replies View RelatedI was trying to make a worm gear with a expanding distance every round.
So I drew it in paint (see the atachments). A picture says more than a thousand words right?
The function of this is to give more space between the bottles that come off a assambly line.
I am trying to copy big assembly with its folders from one folder to another.I cant use Copy Design because I get too long path error.
Alternative way of copying files and keeping its relationships?
I create an I part and I noticed it creates a folder within my main folder. This introduces a bit of chaos into my folder structure, is there any way around it?
View 5 Replies View RelatedHow does one change the measurement units?...or does one want to? What is the relationship between the measurement tool and the actual printout?
I draw a box, I measure the box and it tells me its 37.886 (what r the units?) I do a printout at 1:1 on an 8.5x11 landscape and nothing matches.....?
Where can I get a manual to reference?
I want to union all the members in a complex roof truss structure so I can 3D print the model (picture attached). It seems intermittent in which elements will union and which wont. Revisiting the elements they sometimes then union. Sometimes there is no error message while sometimes 'Inconsistent Edge Face Relationship'
View 9 Replies View RelatedBy working in millimetres instead of metres will slow things up with my file. My 0,0 point refers to the actual survey co-ordinates which I need to continue to use as regularly share my file with the surveyor and we need to be working on the same 0,0 point. Because I am working in mm 0,0 is therefore further from my drawing that it would be in m. Will changing to metres make a significant difference to me? My file has 34 layout pages and even more viewports which I would have to re scale if I changed the units in my drawings or is there a simpler way of doing this than rescaling the drawing by a factor of 0.001?
View 4 Replies View RelatedThe SSA literature states to use an On Sag inlet to model an inlet used in the middle of a parking lot.
This is more commonly known as an "Area Inlet" application, and is also used in areas such as airport runways, greenbelts and golf courses.
To develop the correct operating head relationship over the grate, we need to be able to enter a stage-storage curve starting from the grate elevation. This will develop the "cone" shape storage needed to develop the correct head elevation over the grate.
It appears looking at the On Sag options there is only the Ponded Area parameter available; the same parameter found in a Junction. This calculates the head elevation as a function of the ponded volume and a constant area.
I want to confirm that the On Sag inlet application used as an Area inlet, is using all four sides, full perimeter = 2(L+W), of the inlet for the weir flow calculations before orifice flow controls, not just 3 sides as a grate on a curb.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
Is it possible to have a box, that surrounds an attribute, increase or decrease it's width based on the width of the attribute text?
View 0 Replies View RelatedWhat is the relationship between a mask and a layer?
View 3 Replies View RelatedI have (what I think should be) a relative simple question. I'm trying to find the best way to create a relationship between some standard primitive (box) objects (i.e. loudspeakers) at the walls they're supposed to be mounted to (i.e. the inner faces of another "box" object with inverted normals). I would like to be able to change the length and/or width values of the "room" (box object) and have the loudspeakers (also box objects) expand or contract with the walls.
I've tried linking and wiring parameters but so far no luck.
can change your UCS direction in an Inventor Sketch?
I'm copying from MDT into an Inventor sketch and when I do so, my UCS goes in a different direction and my sketch is like out in space.
Suppose I have carefully made a selection and saved it as a channel. I then use that channel in an adjustment layer as a mask. I also use the inverse of that channel in another adjustment layer.
At this point do I have three separate masks inside photoshop: the original channel, and two others that are layer masks? If I then see that the original mask wasn't quite right so I do a refine mask on one of the layer masks. I haven't, I think, changed the original channel, right? But I'd like to use the inverse of that channel in the other adjustment layer.
This gets pretty messy pretty fast, especially because I'm working on a very large image. After I modify the layer mask should I save it off as a separate named channel (it doesn't seem to be accessible unless the layer it's on is active) and then invert that, save it, and reload it as the layer mask for the other adjustment layer?
Do you know why the color of color picker changes when using adjustment layers?
View 1 Replies View Relatedwhen i select the clip in cfx schematic, how to tell which clip is it inside the timing editor ? there's only small thumbnail and this won't work when i got multiple sama clips on the cfx schematic, the thumbnail will look the same. There has to be a visual relationship between the two areas.
View 5 Replies View RelatedI have a FrameGen BOM setup as desired and added the column for Mass/lbmass to get the weight. However on those rows where there are multiples of the Item QTY (2 of this, 3 of that) the Mass shows just the weight of one item rather than the combined weight...which is what I want. I tried making a custom property call WEIGHT and entering an expression, but in that selection I do have mass but not Item QTY as a selection.
View 1 Replies View RelatedI am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
In the right upper corner of autosek Invetor 2014 is a button wich says New (NEU = German) if i click there the window gets bright gray and says no response (keine Rückmeldung) ... i started the Laptop several times but it never Works.
View 3 Replies View RelatedHow to export SAT files v.6.0 from 2014
View 4 Replies View RelatedI am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
I sometimes am having some graphics problems. I placed a gantry into an assembly and it leaves a 'ghost' image behind. When I go under options and change from say 'smoother' to 'smooth' the problem goes away. Any way to avoid this totally?
My specs: Inventor Professional 2014, 64 bit edition, I've got an HP Z400 desktop which is a 3.2GHz Processor with 4 cores, 12 GB RAM. NVIDIA Quadro 4000 graphics card.
I never had this problem with 2012, nor 2013, same computer, same settings which I always import.
How do I install the library inventor 2014 student version, the mine is empty.
View 1 Replies View RelatedWe are being pushed from some of our customers to supply BIM files for Revit.I was told by our software supplier that Inventor 2014 could create Revit files, and it looks as though I can via the BIM Tab on the Ribbon. I havent used Revit or created any BIM content before and I was hoping to open another manufactures file (*.RFA) in Inventor to disect the file and how to create our own files. I can only find an import option in the OPEN dialog box for a Revit Project File (*.rvt). Is it possable to open/import a RFA files in Inventor 2014?
View 4 Replies View RelatedIs it possible to Record Macro in Inventor 2014?
If yes, how can I acieve this?
If No, Is there any Add-in or other possibilities? Any Add-in available?
My production team uses the Inventor View to view drawings once they are released from engineering. Sometimes they get printed so they can send a copy to our vendors. When ever they print from Inventor View 2014 the lines that are on the Visible Layer do not print. Also the lines in the titeblock are not very dark even though the "print all colors black" has been checked. It does not matter which printer or computer is used.
View 3 Replies View RelatedI installed inventor 2014 on my laptop with windows 8.1, and export to DWG does not work. When i go to export, the options button doesnt work. when i click save, it pops up a windows and says "Problems encountered while saving the document." On my desktop with 2014 it works perfectly. I have the newest sp1.
View 8 Replies View RelatedI recently migrated to the Inventor 2014 release and immediately encountered several issues.
One that I haven't found reported on this site is the problem related with the 3D mouse (3D connexion Space Navigator). I've been working with it beautifully with R2012-2013 but now that I started working on Inventor 2014 it stalls and stops working suddenly. It's so bad that I stopped using the 3D mouse entirely.
[URL]
I uninstalled and re-installed the latest mouse drivers and checked that it's not the device malfunctioning. I also installed the Inventor update available on Autodesk site. No change...