AutoCAD Civil 3D :: Tell If AeccParcelSegmentCurve Is Curving To Left Or Right?
Nov 1, 2013How do you tell if a AeccParcelSegmentCurve is curving to the left or right?
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Layout Profiles Left And Right
Jun 24, 2011Our firm has finally decided to leave LDC 2009 behind and moving to C3D 2012.I would like to ask a few questions about the way plan and profiles are created with C3D.
In LDC, we would create a full profile that included everything in it, that is proposed and existing centerline elevations and left and right top of curb elevations. Then on the sheet layouts, we would make many viewports that showed the proposed and existing sets, that is centers, lefts and rights. (medians in the example attached)
I've been watching many online videos on how to sample center, left and right and how to create a proposed center line but I can't figure out how to make a proposed left and right profile so that I can control drainage into existing inlets.
AutoCAD Civil 3D :: Put Label Only On Right OR Left Side Of Alignment?
Nov 1, 2012How can I put the label only on the right OR the left side of the alignment?
View 2 Replies View RelatedAutoCAD Civil 3D :: Plan And Profile Sheets Left To Right
Apr 6, 2010I have generated a right to left profile. I use General-create the view frames and they show right to left --good
I use General-create sheets to create the layouts in my current drawing . Rather than being from left to right, it flips my plan view upside down and aligns it on the left side. Is their a viewport setting I don't know about?
AutoCAD Civil 3D :: Display Elevation At Bottom Left Corner?
Nov 21, 2013Is there a way for the elevation of surface to be shown in the bottom left corner along with the easting and northing as the cursor tracks over the surface? currently only the easting and northing track with the cursor the elevation remains 0.00
View 4 Replies View RelatedAutoCAD Civil 3D :: Flip Regular Left To Right Profile To Read With The 0+00 On Right?
Oct 12, 2011How do you flip a regular left to right profile to read with the 0+00 on the right?
View 7 Replies View RelatedAutoCAD Civil 3D :: Get Extra Column Of Grid To Left Of Sections?
Mar 29, 2013I am trying to get an extra column of grid to the left of my sections. Is this a way to do this? Do I need to have white space in this area and not a grid?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
AutoCAD Civil 3D :: Left / Right Sample Profile Not Honoring The Gutter
May 2, 2013When creating a profile with right/left samples, the sampled profile does not show the gutter when crossing an intersection. If you do a quick profile of the area, it shows the gutters. See images below...
Sampled profile...
Same area with a quick profile...
AutoCAD Civil 3D :: Corridors - Medians / Right And Left Turn Lanes - Best Way To Model?
Jan 3, 2013I'm trying to model a corridor with medians and resulting turn lanes (widening an existing street to full arterial). Any good way to model? I have been playing around with having target alignments for the edge of medians, edge of asphalt....but have not been getting the best results.
View 4 Replies View RelatedAutoCAD Civil 3D :: Match Line Labels Constantly Reset To The Left And Right?
Jan 10, 2014I've got a project where the match line labels constantly reset to the left and right of the match line itself even though I've set it to be middle. I didn't have this problem with 2013 or earlier, so is it a possible bug?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
AutoCAD Civil 3D :: Highway Median Intersection Opposing Left Turn Lanes
Jan 16, 2013I'm facing problem in designing a intersection. Highway median intersection opposing left turn lanes.
View 4 Replies View RelatedAutoCAD Civil 3D :: Median Highway Intersection Opposing Left Turn Lanes
Apr 10, 2008I will be starting to design a 4 lane - 5 lane highway divided by a median. The median will be offset from the cl, stop for the intersection, then continue on the other side of the cl once past the intersection.
I will start digging into the median sub assemblies to try to figure this out.
I remember the old LLD/Civil manuals used to have a description on how to do this. I have 2008 sp2, but only the 2007 manual printed out.
AutoCAD Inventor :: Curving A Part On Two Axis?
Nov 12, 2013I would like to create a curved surface from a flat part. I have designed the 3d part on the XY plane and would like to have it curved as if placed on a sphere.
I have attached a picture of what I want to achieve. The part is curved in both the X-axis and Y-axis. Unfortunately I cannot attach the part file due to proprietary rights.
At first I used the Bend Part feature and created a bend on both sides on one axis.This was done by sketching a line in the center of the part, which is symmetric in the x-axis and using Bend->Sides. Then I sketched another line which is symmetric in the y-axis and this intersects with the first line used for bending. I have found that I cannot create a second bend using this new line.
Xara :: Mix Left To Right And Right To Left (hebrew) Text In Textbox?
Jan 8, 2012I need to mix left to right and right to left (hebrew) text in a textbox. How can I do that? If I copy/paste hebrew text the text is inserted as if it was left to right, that is: reversed. Can I somehow work around that?
View 2 Replies View RelatedPhotoshop :: Left Alt And Left Click Not Working In CS6
Jun 3, 2012I just bought Photoshop CS6 and it seems that it isn't working properly. I run Windows 7. The left click and left alt are not working. The buttons work perfectly on other programs.
View 1 Replies View RelatedAutoCAD Inventor :: Curving A 2x40mm Bar In Sheet Metal Then Making Holes
Oct 7, 2011I have scoured the pages on here looking for a way to put a 90deg curve in a piece of bar (2x40x2356mm) .
The next issue I am having is after I have curved it I need to put equidistant 4mm holes central along its length (20mm in and 40.6mm between them).
AutoCAD Civil 3D :: Plot Border To Cover Entire Sheet Border Instead Of Just Bottom Left Corner
Feb 19, 2013Per the attached exhibit, how to get the plot border to cover the entire sheet border instead of just the bottom left corner.
View 1 Replies View RelatedPhotoshop :: Curving A Photo
Jun 24, 2003I need to curve a panoramic so it fits into a curved sign. Any thoughts?
View 2 Replies View RelatedPhotoshop :: Path Curving?
Aug 14, 2009have a problem with the path tool. When I do one curve and want to do another curve the same direction as the first. The second curve goes the opposite direction and if I try to twist the anchors so it goes the same direction the path goes all twisty and weird.
View 4 Replies View RelatedPhotoshop :: Curving Pictures
Aug 14, 2003how I could curve images. I would like to have some images curve in without cropping it. I just want to make some picture curve in a circular motion.
View 3 Replies View RelatedPhotoshop :: Curving Text...
Aug 7, 2004I'm using Adobe Photoshop CS 8.0 and I'm having trouble figuring out how to make my text curved. I've looked for tutorials and the ones I find are all for Paint Shop (which I do not have).
how to curve text on this program?
CorelDRAW X6 :: Undo Curving Text
Sep 11, 2012I recived a file and its curved using Ctrl + Q. Can i undo this option ?.
View 1 Replies View RelatedPhotoshop :: Curving And Bending Objects
Aug 10, 2004I have a flower which I would like to bend or curve it. The flower is straight I'm trying to make it curve like a sideways U.
View 4 Replies View RelatedPhotoshop :: Curving Blends Of Colours
Jun 12, 2008look at the area that contains the globe. Behind it there is a blurred swirl of colours.
how this colour-blur/blend effect is achieved? I've tried blurring but it looks really poor.
Photoshop :: Curving The Corner Of Pictures
Aug 2, 2008how to do it?
View 3 Replies View RelatedXara :: Curving A Floor Shadow
Feb 13, 2013It is possible to take a floor shadow and curve it around an object? Or does it have to stay straight?
View 9 Replies View RelatedGIMP :: Curving Uploaded Font?
Oct 24, 2011I have made my own font since none of the Gimp fonts suited my purpose. I would like to curve it to a path; I have curved a Gimp font to a path already. Can't seem to figure it out.. I only just downloaded it an hour ago. I've been using Paint.NET
View 6 Replies View RelatedIllustrator :: Curving A Group Of Objects?
Jul 16, 2012In my image, the top rectangle has been curved to its finished shape (bottom). I did this before, with actually several objects together. They all curve with the rectangle.
I tried to do this again, using all kinds of Transform tools (shear) and Effect tools, and everything I could find, but nothing worked. I thought maybe Shear might work if I could pin down the middle of the rectangle and shear both sides of the rectangle upward, but this doesn't work. I think I'll start taking notes when I find something that works !
How do I do this simple curving of single object or group of objects?
Photoshop :: CS2 - Curving Brushed Straight Line?
Jul 26, 2012I am still using CS2, and I am having to break up my desired curved lines by repeatedly using the SHIFT key while clicking the next point along my desired curved line. I would like to know if there is a plug-in that would let me pick the starting point as normal, hold down the shift key while I move the mouse to the ending point, and then,after I click and get the straight line with the brush of my choice, I need a way to BEND that line in the pristine shape of a circular or elliptical arc. I need some way to indicate how much arc angle is needed (from a teeny bit to a semicircle), and also how much to skew it towards either of the end points.
The way I am doing this now is
a) create a new layer and draw the straight line, then, delete everything else on this layer but the line, then show the main layer and edit the 2nd layer with warp, and then, finally, use warp to bend and skew the straight line - after all that, I flatten the image back to one layer. The problem with this method is that warp doesn't hold the edges of my formerly straight line (with crisp edges) true, but introduces indentations and juttings which I then have to go and "fix up" by hand.
b) copy the image to MSPaint, and use the bezier cure to draw the curved line I want, and then, copy it back into CS2.
If there is a way to bend my straight lines drawn with my selected brush, and it would keep the edges crisp and smooth, then I sure would like to learn how. The problem with using "paths" and stroking the path is that I cannot see how it will look while drawing the path and, even after I stroke it, that ugly path line with its anchor and control points muddles the picture and I wind up having to delete it and go back. I need to be able to see the FINAL result of bending my curved line while I am adjusting it with no artifacts to interfere with my close examination of the result.
CorelDRAW Graphics Suite X5 :: Curving Perspectives
May 21, 2013I want to know if there is a way of making an item's perspective go around a curve, for example: I am busy with corporate branding and want to be able to create the logo and edit it to go around the mug, so the perspective cant just be linear.
View 14 Replies View RelatedCorelDRAW X4 :: Batch Curving Of Text Objects?
Jul 22, 2011I've been curving my documents' text objects manually page by page, one by one. Is there a quick way to convert all the text present in documents to curves in one go? There must be a macro.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM