AutoCAD Civil 3D :: Making A Block (from Exploded Surface) Un-selectable
Dec 13, 2012
I've got a surface that I want to be semi-tranparent, it seems the only practical solution at the moment is to eXplode it so that layer transparency will affect it. Which is fine, I guess, for the time being (well actually it's not but we don't have much choice with 2013 do we?).
Putting that aside, my issue now is that every time I hover over the exploded block, it does a selection 'preview' which is distracting to say the least. So I want this exploded surface to be unselectable. Is there a way? If I lock the layer, it dims it, which I don't want. If I freeze the layer the exploded surface just disappears.
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
View 3 Replies
ADVERTISEMENT
Aug 22, 2013
I have got points from a GIS software into AutoCAD, the problem is that I am unable to draw a polyline between the points to get a distance between the points. Anu lisp routine which can convert the points to make them selectable. I have attached the drawing I am working on for those of you who want to have a go at this one.
View 3 Replies
View Related
Feb 8, 2012
How to get the individual components of a block that has just been exploded within a lisp routine into a selection set. I want to alter the layer of each element to the insert layer of the block. I may also make one or two other changes according to what I find in the block.
View 8 Replies
View Related
Sep 19, 2011
I recently upgraded to 2011 from 2008. I remember I had to configure something in 2008 to make block geometry selectable as it pertains to selecting for dimensioning. Example: I have a block inserted and want to show some of the dimensions without doing it in the block editor or exploding the block. I have searched, googled and looked at the Options panel in 2011 but cannot find how to do this. I seem to recall there was a variable to turn on or off but can't remember for sure.
View 5 Replies
View Related
Feb 18, 2013
I got this plan from a third person and, the point from the survey have the property " bloc ". In their attribute property, I can see the elevation value. but in the z of the actual bloc, it shows zero. I would like to tell C3D to use the attribute elevation for his actual Z in the drawing. How can I achieve this ?
View 6 Replies
View Related
Sep 4, 2013
When working with multiple building pads and configurations change rapidly. Is there a method to add a Block or Xref into a Civil3D Surface under Drawing Objects? If so, how could you do it.
I want to have a building block type 1 that I can update the block or xref then updates the surface rather than doing each one individually. The Block would have a FFE of 0.00 and then the stoops, etc would either be a 0.1 drop or so.
View 4 Replies
View Related
Apr 4, 2012
I have a series of drawings and am unable to make some block text for risers not appear hidden.If I paste the block into another drawing I get the text to appear but then when I try to bring back into this drawing it becomes hidden.
View 5 Replies
View Related
Sep 14, 2012
I'm working with some drawings (from others) that have some points that aren't selectable by node (although I can draw a line by points). I've isolated it to the Point Style. Trouble is, I can't seem to find anything out of the ordinary when I go to those settings.
View 2 Replies
View Related
May 9, 2012
I just drew a polyline on my defpoints layer, but now the polyline is not selectable. I have had this happen before with a different file and couldn't fix it then either.
All the settings/layer states look fine, but as soon as I add something to the defpoints layer it's untouchable.
AutoCAD Civil 3D 2010
View 9 Replies
View Related
Dec 2, 2011
I often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
View 6 Replies
View Related
Oct 22, 2012
Has instances where you set your tolerance for the maximum triangle lenth to say 50m to reduce the amount of triangles along the edge that run at long distances. When I do this I end up with multiple surface holes and I'm not sure why as there are points in the area.
I thought well maybe it's because i should've reduced my max triangles first then added breaklines. Would this matter? I also thought I could add a line to the surface to fix the holes vs. deleting surface lines along the entire edge of a surface for many many miles.
View 9 Replies
View Related
Nov 14, 2012
I am trying to add points into a surface. I have done this before without any problems, but now I am having issues.
When I ID points which makes up the surface it gives me the correct Z level e.g. 24.5m, however when I hover over the surface it shows me the surface name and a different z level e.g. 0.65m. What is the reason for this difference in z levels? I think this may be causing the issue I am having when I add new points.
I select the surface and use the 'edit surface command' in the ribbon, choosing add point.
When I add a point at the level I require(23.89m), it puts it in a lot higher than the surrounding area, so I tried to put the point in to the lower z levels (0.4m) it puts it in a lot lower!
View 5 Replies
View Related
Dec 10, 2012
My goal is coming up with the volume bounded by the design surface and the existing surface. I don't have the design surface modeled yet.
Do i need to create alignment offsets?. Alignment 1 profile view is also attached. Then Alignment2.
What about starting with alignment1 profile view? Since I have created a polyline as the design profile ?
how do I shrink labels? Where is it in the settings ; the Align folder had been check.
View 2 Replies
View Related
Oct 2, 2012
I am issues with DEM files that I am downloading from the USGS website.I download 24k, elevation for the area I need. I then choose staged 1 second, add a surface to a blank drawing, then upload the DEM files to the surface.
The surface imports correcty, but when I try to import points taken by a surveyor on the same drawing, they plot incorrectly.The DEM surface and the points from the surveyor do not correspond. Also, the DEM surface is in meters, not feet. I have tried changing drawing settings, datum types, coordinate types, etc.
View 9 Replies
View Related
Apr 4, 2012
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
View 1 Replies
View Related
Jul 29, 2013
I have a project involving 3 programs. I am creating a planned development in 3d to be 3d printed when finished. The project is a 5 acre tract containing 8 buildings. I have built the surface in C3D and each building in Revit. The buildings are not in the same Revit file. For my solid work, I will bring the files over into 3ds Max Design to section into smaller quadrants to build in the 3d printer.
The questions:
Would it be better to import the surface into Revit to merge surface and buildings together?
Would it be better to import the buildings into C3D to merge entities?
Would it be better to bring those entities into 3ds Max and then merge them into one? Will 3ds Max Design allow me to insert entities accurately in the environment?
View 6 Replies
View Related
Sep 15, 2013
I need to create a sub-set surface from my main surface. not sure what the vernacular is for a "subset surface" in c3d but i do have a feature line that bouinds the desired area, but that is as far as i can solve.
i did try creating a new surface - pasted the main surface in the edit definition, then deleted triangles until the boundary alighned wiht my featureline. This seemed to work, but when i view the properties of the smaller subset suface, it shows a mimum and maximum elevation that is incorrect.
View 3 Replies
View Related
Mar 1, 2013
Im currently using an addon for Civil 3D called Novapoint. It allows me to create 3D models of surfaces made out of 3d faces and easily models cut and fill 3d-models for me.
The only thing i need to create a cut and fill model is one or several ground surfaces (existing ground, earth layers, rock etc. whatever i need) and a closed polyline/3Dpolyline that represents the level I want my cut and/or fill model.
I enter the spcifications I want such as; earth cut angle, rock cut angle, fill angle, select which surfaces i want to include in the model calculation and select the polyline.Novapoint then calculates the cut/fill model from the surfaces to the polyline and models the different cut/fill angles and gives me the results in a 3d-face model and a specification of the volyme of rock cut, earth cut an fill.
1. Novapoint is quite unstable and crashes alot
2. You cant create profiles out of 3d faces
3. Novapoint does not automaticly combine the start surfaces with the modeled cut/fill surface
4. A large surface made out of 3d-faces demands alot of computer power
So I want to how I do the same that Novapoint does for me in Civil 3D? (I have access to Civil 3D 2007-2013 depending on which one you're using)I know I can take the 3Dfaces i created in Novapoint and make a surface in Civil 3D with them but I want to exclude Novapoint completely.
View 9 Replies
View Related
Mar 26, 2012
all of a sudden whenever I run audit on my corridor file the surface definition becomes a snapshot. To add to the drama, the corridor surface will not paste into an empty surface. Why?
View 2 Replies
View Related
Feb 7, 2013
My problem added with pic ... I want to make volume calculate for sample road project. When I try to compute materials I cant use Corridor surface for DATUM... There is only target surface on option..
View 2 Replies
View Related
Mar 6, 2012
I am trying to visualize a road project. The problems is, whenever the corridor surface goes below the EG surface (when the road is in cut) the EG surface is the only visible surface.
I sort of need to subtract the corridor surface from the EG surface, or merge the both surfaces into one.
View 3 Replies
View Related
May 3, 2013
I was wondering if there is an easy way to trim one surface to another. Right now, I have two slopes (3:1) that are perpendicular to each other. They meet at a corner and I have extended them past each other so that I could see the intersecting edge. Now I would like to trim them to each other like you would a polyline etc... but I am not sure how to do this.
If I select surf trim, it tells me they are the wrong object type, but they are tin surfaces?
View 5 Replies
View Related
Sep 18, 2013
How do you most easily do a sheet metal plate that needs to follow a surface?
L1 is less than L2, and a radius of the plate?
In Inventor 2012
View 3 Replies
View Related
May 22, 2013
I am trying to make support ribs on a curved plastic surface to make the construction stiffer for a snow puncher.
(Just like on the attached picture, "pic 1".)
But I am having trouble doing this over the curved surface towards the top end of the rib.
As is now I sketch the shape of the rib in both ends and loft it over a sketch (see attached picture, "pic 2"), and then revolve to get the ends.
But this gives problems, result is not good and it's very time consuming.
If this was on a flat surface it would be easier, but now I get a lip along the loft and along the revolve on the top end of the rib.
I'm using Inventor Professional 2013 Student Version.
View 1 Replies
View Related
Jun 28, 2011
Trying to make a simple dynamic block. Its a pipe with a "cylindrical annoying" hatch that gets distorted when i stretch the object.see pics attached.
My guess is that this problem has something to do with hatch. What options do i have?
Basically 2"x1' standard block which i want to change height only and maybe flip it but thats not an issue .
View 1 Replies
View Related
Mar 24, 2012
I was trying to make a block of an elevation, no more than 150 objects and the program had a FATAL ERROR; I tryed again and again and always the same fatality.
I'm using AutoCAD LT 2007
View 1 Replies
View Related
May 10, 2011
Is their a protocol for making a block with visibility states? I have not done this in a long time but I know the procedure for creating the visibility states but for some reason no matter how many times i adjust this one block i cannot get the this attribute definition to stop showing in visibility states.
I have tried doing a show all and hiding this attribute manually over and over again and i cannot get the block to hold the info. it looks right in the block editor but as soon as i insert this block i can see the visibility state is not right. is their a procedure of how i set up a block like this so that the visibility states will work the way i want them too?
View 3 Replies
View Related
Jan 13, 2014
I am trying to make a block with text inside in it. I need the text to rotate at 0 no matter what degree I insert the block into my drawing. For example the type of blocks I use are for fire alarm in which need to go onto different sides of the walls so I need a base point in which I can insert the block at but the text to always rotate back at 0.
View 2 Replies
View Related
Oct 16, 2012
making a 11x8.5 title block template.I have made a few in model and paper space but when i insert them in layout they appear very small. i am using autocad 2008.
View 5 Replies
View Related
Jun 27, 2013
I've got a dynamic block for an irrigation spray head that I want to make annotative. My problem is that I need to spray radius (i.e. 15', 10') to stay the same, but the head symbol and text to scale with the viewport. So far I've only been able to make the entire block annotive. I've attached a of the block for refence.
View 5 Replies
View Related
Aug 23, 2013
I have a small vba sub wich changes the color and layer of all entities inside a block. It seems to work pretty well for the majority of blocks, but then if I try that on a dynamic block, the definition is correctly altered, but the references aren't updated...
I know for a fact that the definition has been correctly modified because if I type bedit, I can see the definition is modified. Then, in the block editor, if I save the block, the references are correctly updated.
How to force references to update after I made the modifications inside the definition ?
I searched for methods within the VBA Reference and I tried blockRef.Update but it doesn't seem to have any effect.
View 2 Replies
View Related
