AutoCad :: Making A Title Block 11x8.5?
Oct 16, 2012making a 11x8.5 title block template.I have made a few in model and paper space but when i insert them in layout they appear very small. i am using autocad 2008.
View 5 Replies
ADVERTISEMENT
AutoCAD Inventor :: Retaining Title Block Prompted Entries When Changing Title Blocks
Apr 26, 2013The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
AutoCad :: Link Title Of File To Title Block Inside
Jun 11, 2012I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedAutoCAD 2010 :: Convert Block Back To Title Block Or Border
Feb 15, 2012We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
Revit :: How To Convert Existing 2D Autocad Title Block Into Block Template
Jul 24, 2008How to convert existing 2d autocad title block into Revit title block template?
View 7 Replies View RelatedAutoCad :: Attribute In Title Block Exists In Block Editor But Not In Project
Sep 6, 2012Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
AutoCad :: Inserting Title Block - Design In Middle Of Block?
Jul 30, 2013How do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedAutoCad :: Create Block To Insert On Title Block
Oct 26, 2012Is it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
AutoCad :: Editing Title Block Using Block Editor
Aug 31, 2011I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedAutoCAD .NET :: Getting Block Attributes From Title Block
Sep 19, 2011I'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
AutoCad 2D :: Making Edits To Title Blocks In Multiple Drawings?
Dec 4, 2013I was wondering if it is possible to make adjustments to tittle blocks across multiple drawings.
Such as changing a Rev A to a Rev B
I have to update about a hundred drawings and was wondering if there is some sort of Macro that I can use to do this without manually going into each one.
AutoCad :: Title Block Templates
Dec 6, 2012I have a problem in which when i set up my title block templates, when i set them up and keep my template inside the dashed area the printed dwg is either cropped or too far inside so it has to be well outside at the top to print within 10 mm of the actual paper, attached is an image of how i have to do it to make it print within 10 mm of the edge of the paper print.
View 3 Replies View RelatedAutoCAD Civil 3D :: Title Block For GIS
Dec 3, 2013I'm trying to take my title blocks that I have setup in Civil 3D and would like to use them in ArcGIS in my layouts. A company I used to work with did have it setup but I was not part of the setup.
View 2 Replies View RelatedAutoCad :: Creating A3 Title Block From A1
Jan 18, 2013I have a A1 title block in model space that I like the look of. I'd like to duplicate this in A3 and A4.Is there a way that I can scale the A1 dimensions to A3 and A4 to avoid having to redraw them again with the appropriate dimensions?
View 9 Replies View RelatedAutoCad :: Title Block Change From A4 To A3
Jun 3, 2011i have a title block in the layout tab which i use for all new docs. when starting a new drawing i open my old one, delete the drawings and save it with a new name - this way i always have my title block how i want it in the Layout 1 tab. this has worked for me so far. but now I need to create an A3 print out.
i have created the picture that i need in modelspace but when i click in the viewport within the layout and select the scale that I have been asked to use, the pic becomes too big for the page.
when i go into page setup i can select a3 and preview this but it just shows my a4 page in the middle of an a3 page. so how to i make the titleblock and viewport bigger (to fit a3)?
AutoCad :: Using Title Block Templates?
Mar 1, 2013I was able to draw A1, A3 and A4 title blocks in model space before giving each of these title block drawings a layout paperspace tab at the correct paper size.
I wanted to be able to start new drawings with the title blocks and paper sizes already done.
But what happens when the beginning of a new drawing project is with a drawing that someone else has already done? I am starting a new project and I would like to focus in one one room in a large building. This means that I plan to end up with a 1:50 drawing of a room on my pre-set A3 sheet and title block.
Do I import this person's drawing into my drawing of the three title blocks in model space with the three paperspace tabs or do I import the title blocks into the other person's floor plans?
AutoCad :: How To Add New Sheet With Title Block
May 4, 2012How to add a new sheet with my title block. I am a little confused on this so far. I have read the autodesk 5 parts to sheet set manger and there is allot of things I'm not sure of. The title block is the first
View 9 Replies View RelatedAutoCad :: Title Block Scaling
Nov 9, 2011We are having some issues with title block scaling when importing them from the design center. Some people have this problem whilst others have had no problem at all or only in the past and this has since stopped.
Layout Template.jpg
The image above shows an example of the problem. The Layout basically appears 25.4 times larger than the paper itself (the paper is at the bottom left). This would indicate something is wrong with the insertion scale.
The drawing containing the title blocks is in millimeters and the drawings which it is being inserted to are in a mixture of millimeters, inches, or unitless. I have checked the insertion scale settings within options and both Source and Target units are set to millimeters for users that have this problem and users that don't.
I know a quick fix is to just select that block and scale it by 0.03937 (1/25.4).
AutoCad :: A1 Title Block Measurements?
Aug 19, 2013What’s the typical width indicated by the red line shown in the drawing below on a scaled A1 title block?
100mm or 50mm
AutoCad :: Title Block Text
Feb 28, 2011Attached is the start of a title block, which I hacked up from a title block I found on this forum.
If you use dd edit to change the text you can only ever type one line of text, the return key does not move you to the next line. How do I change this so I can type in columns.
AutoCad 2D :: How To Get Title Block Appear In Every Layout
Aug 16, 2011I have a drawing template that I frequently use and am trying to get the title block appear in every layout. Is this possible? It is only displayed on my first layout.
View 4 Replies View RelatedPhotoshop Elements :: Stops Responding When Creating 11x8.5 Collage
Jul 7, 2013I've been using Adobe Photoshop Elements 11 for a couple of months to create 11x8.5 photo collage's as part of my digital scrapbook. Yesterday, when I tried to create a new collage the program stopped responding and forced me to close it. It will only do this with an 11x8.5, it's not a problem for any other size, unfortunately the rest of my pages are 11x8.5 so I really need to be able to use this size!
View 6 Replies View RelatedAutoCAD LT :: Title Block With Excel Fields
Apr 30, 2012I want to create title blocks with text fields that are linked to an excel file for easy updating. I want to be able to open the excel file and change the sheet number, date, title, revisions etc. Any title block .dwg file and an excel file that are linked together?
View 1 Replies View RelatedAutoCAD Inventor :: New Title Block In Old Drawings?
Oct 22, 2013I have done a new Title Block in our drawing templates.
It only works in New drawings if I open an old drawing I must "Copy/paste" the new Title Block into the browser to the left But I want all our old drawings to use the new Title Block.
Is there a way to have the new Title as default on all old drawings?
AutoCAD Inventor :: Customizing The Title Block?
Jun 14, 2012How can I customize the title block where it says Drawn, Checked and approved?
I want the dates with initials to place automatically. However, I want the date of approval and checked to be 2-5 days after the drawn date. (using Inventor pro. 2012)
AutoCAD 2010 :: Title Block To Be Same In All Tabs
Mar 21, 2013I know how to insert title block in a layout tab. i want the title block to be the same block in all the tabs i am using. if i have 10 tabs i would like each layout tab to have the same title block. i will also need properties to where i change the date on the cover sheet, all layout tabs will be changed at the same time.
this also needs to be 1 file and not a base file and xref.
i know this works because i am working in autocad where it is implemented. this was done by an individual before i started at this job.
AutoCAD Architecture :: Can’t See Title Block
May 11, 2013Why I can’t see this title block, it opens fine with no errors, but I cant find it in drawing, when I open it separately then it’s all fine but when I importing it to other drawing I cant find it.
[URL]
AutoCAD Inventor :: Replace Title Block C#
Oct 2, 2013I am trying to replace the title block of the first sheet of the active drawing via C#. I currently am receiving the following error on the last line of The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)).
Why the code below is throwing this error? I have tried multiple variations of the code below to no avail and I'm sure this is something minor that I am overlooking. The title block definition under Drawing Resources is replaced with no errors, the title block on Sheet 1 is deleted just fine, but I can't seem to add a Title Block back in!
How Documents are defined:
Inventor._DrawingDocument oDoc = getDoc();Inventor.DrawingDocument sourceDoc =(Drawing Document) instance.Documents. OpenWith Options(sPath, options, false); Find, copy, replace: TitleBlockDefinition tBlock = sourceDoc.TitleBlockDefinitions[blockList.SelectedItem.ToString()]; TitleBlockDefinition newBlock = tBlock.CopyTo(oDoc, true); oDoc.Sheets[1].TitleBlock.Delete(); oDoc.Sheets[1].AddTitleBlock(newBlock);
AutoCAD LT :: New Title Block - Linking Tables
Mar 5, 2013I have created a new title block for my company and i have a revision table on it. I use the tabs to go from different paper spaces and i would like to find a solution to where if i enter information on my first page it will automatically copy exactly what i put to the other tables on the other tabs.
View 4 Replies View RelatedAutoCAD Inventor :: Weight In BOM / Title Block
Apr 20, 2012I am trying to include the weight for all components in assembly BOM as well as calculated overall weight in TB, but there are no available property to choose from in the drop-down list.
View 2 Replies View RelatedAutoCAD Inventor :: Get Parameter Into Title Block?
Apr 10, 2013I've created the user parameters and they get the information I need by the rules in illogic and also added as custom properties, but when I try to put them on the title block they don't retrieve the information.
View 9 Replies View Related