AutoCAD Civil 3D :: Adding A Building Block With Elevations To A Surface
Sep 4, 2013
When working with multiple building pads and configurations change rapidly. Is there a method to add a Block or Xref into a Civil3D Surface under Drawing Objects? If so, how could you do it.
I want to have a building block type 1 that I can update the block or xref then updates the surface rather than doing each one individually. The Block would have a FFE of 0.00 and then the stoops, etc would either be a 0.1 drop or so.
View 4 Replies
ADVERTISEMENT
May 3, 2012
In C3D 2012, when I needed to know what elevation a surface contour was at, I simply hovered my mouse near the point in question and a small window would tell me what elevation my mouse was hovering at. Now, in 2013 I am trying to do the same thing but the little window only has the name of the surface and no elevations. So, how am I supposed to know surface elevations on the fly? Is there some setting to turn that back on?
View 3 Replies
View Related
Oct 31, 2013
I am attempting to x-ref a building model that was drawn in 2013 MEP in a Civil3D drawing that contains the site surface. When I x-ref my building model into the site drawing and attempt to align and scale the building some of my walls become broken and missing. I have a feeling this is a scaling issue because on my site my north wall should be 24' long. The wall is 24' long in MEP, but that same 24' from Civil3D is only a 2' line segment in MEP. How to remedy this? I have tried scale the building model down in MEP first and it causes all kinds of problems with the door and window objects. I tried adjusting the x-ref scale prior to adding the x-ref and it does the same thing.
View 9 Replies
View Related
Feb 1, 2013
I graded a commercial site with mostly feature lines. I added points where I needed them to get everything to work. After modifying my surface, I suddenly have zero elevations randomly throughout my site. They don't make any sense why they appear. Some are just added to my drawing and others are existing points that were changed to zero. I can go to a back up drawing from a few hours ago and redo some grading, but I would like to know if there is a way to just erase zero elevations from the surface. I remember LDD was able to create surfaces ignoring elevations below a set elevation.
View 4 Replies
View Related
Nov 29, 2012
Is there a way to lighten up the colors of my surface slope analysis that the rainbow gives me? My drawing will be going into a report and the colors are too bold. Pastels are a bit too bold.
View 9 Replies
View Related
Sep 6, 2012
In 2012 I can no long grip a spot elevation RC copy. It just ignores it an moves it to the new location.
Is there a setting I might have to re-set?
View 4 Replies
View Related
Oct 12, 2012
I have an existing ground surface with all different z co-ords and im trying to add three proposed buildings to my exisiting ground with all the builidngs having a level of 32.5 as a minimum, however at some points the ground is higher than 32.5 and I only want to raise my existing ground to 32.5 within the proposed buidling layout if it is below 32.5 as im doing a flood calculation. What do i need to for this?
View 2 Replies
View Related
May 10, 2010
Is there a way in C3D to add elevation information from a profile to an alignment label? What I'm trying to do is add labels to an alignment in a plan view with elevation information from a profile design associated with that alignment at a particular station. For example, the note would read:
ALIGNMENT B
STA: 12+83.67
ELEV: 435.87
I can't figure out how to add any elevation data to the alignment note. I really don't want to have to create a section and a corridor surface, but that's the only way I can think of right now... and I'm not sure that would actually let me add a station and elevation in the same note in a plan view.
View 9 Replies
View Related
Apr 25, 2013
Civil3d 2012 - is there a way to project standard autocad lines and curves to an existing surface to the lines and curves end up with the surface elevations? we are trying out that wants 3d lines exported in a dxf file. We have a surface and we have the lines...it's just that the linwork is all at 0 elevation.
View 2 Replies
View Related
Jun 26, 2013
I have a existing surface. I want to create a proposal surface so I can know the volume between boths. This proposal surface is represent for a disposal area that can be filled up to a elevation. I have a bottom of P-surface as a feature line at EL 1608, and I want top of P-surface to EL 1613.
View 4 Replies
View Related
Jun 8, 2012
I've created a surface into Civil3D by importing a LandXML file created from contours in a .dgn file. When I create profile views for the alignments, the elevations are shown negative (-500 to -20) where as they have to be in between 500 to 670. Also when I run the surface elevation analysis, all the elevation are shown in between 1000 to 2200 inches as shown in the figure attached.
Am I missing any conversion or some settings when importing the surface.
Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012
View 6 Replies
View Related
Apr 2, 2012
I've got a number of scenario diagrams to produce where I want to show the volume of material to be dredged from a harbour. There will be no "fill" just cut. In some parts of the area of interest the existing ground is below the target depth, so these holes wouldn't need to dredged further.
Two question:
1. Given that the area in question contains cut areas, but also other areas that I don't want to fill. What is the best way to get a good surface map and volume estimation? Currently, I create a feature line surrounding the entire area to be less than the target depth, set the elevation of the line at that depth, then grade to surface and add an infill. This gives me cut and fill volumes (for the deep holes), of which I ignore the fill number. Is there a better way??
2. I've created my TIN volume surface (comparison of EG with the graded depth surface). Now I want to present the maps with "range interval with datum", so the cut volumes are shaded increasing from (say) yellow to red, whereas for the "fill" areas I don't want to show anything (transparent would be ideal or maybe greys). Is there a way to create customised color ranges for the elevation analysis? As I'm doing numerous maps I don't want to be manually editing and re-editing the analysis range details. I'm using AutoCAD C3D 2012.
Civil3D 2013 (infrastructure suite)
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), GTX680, Win7Pro64
View 9 Replies
View Related
Apr 11, 2013
I am trying to edit the elevation of a JPEG image I have brought into my C3D 2010 file as an xref - I essentially want to 'drape' the image over the existing ground surface I have created to use for presentation purposes i.e. to show how our road layout is predominantly located along the ridge lines of the site.
Typically for other file types I would perform the following steps (using the classic toolbar): Grading > Edit Feature Line Elevations > Elevations from Surface > Select the existing ground surface > select object.
I don't seem to have the ability to select my jpeg xref using this approach... how else can I perform this task?
View 3 Replies
View Related
Sep 11, 2013
I have a surface made by a wide array of points and a line of points that i need to use that surface to assign elevations to ..
View 3 Replies
View Related
Mar 6, 2012
I am trying to visualize a road project. The problems is, whenever the corridor surface goes below the EG surface (when the road is in cut) the EG surface is the only visible surface.
I sort of need to subtract the corridor surface from the EG surface, or merge the both surfaces into one.
View 3 Replies
View Related
Dec 19, 2013
How can I make sure the annotated surface labels spot elevations from my 3d design drawing which is being xrefed into a new Precise Grading Breakout Sheet plots screened?
The Label Style which I created for the annotated surface label spot elevations has all its properties set to be ByLayer for example its color and lineweight. The Layer I assigned the Label Style was assigned to a layer with a color and plot style that should plot any object screened. Color 8 and Plot Style Screened.
What other steps am I missing to assure myself that this Label Style will plot screened in my new Precise Grading Breakout Sheet?
I also made sure that the xref drawing in which this Surface spot elevation has the correct colors and lineweights and Plot Styles in my new Precise Grading Breakout Sheet.
View 5 Replies
View Related
Oct 25, 2013
I am trying to have a block scaled on import baised on the elevation of the point. I already use description key sets to scale blocks in import to parameters added to the code libary, for example; "Pole 0.31" draws a circle with a diameter of .31 meters.
Is there a way where I would be able to scale a block on import based on the elevation of the object? For example, a point's elevation is 1.7m, so on import it would scale a block by 1.7 on the x/y axis. Ideally if I were to modify the datum of the points the blocks would automatically scale, but that is more of a pipe dream.
We import the data from a trimble r8 rover and convert the file to a FBK file before importing the survey data.
View 3 Replies
View Related
May 14, 2013
I have a 3D model from a floor of a building, with 20 rooms on this floor. I have 3D blocks inserted as furniture for each of the rooms and want to create elevations from inside these rooms looking at the 4 walls to show the layout.
How can I position the viewports within each of the rooms to give me a 2D Elevation?
View 5 Replies
View Related
Mar 14, 2013
Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
View 3 Replies
View Related
Aug 30, 2013
I have got a csv file and want to add to the surface but it says error in adding point file.....don't know what to do. Size of the csv is 13MB and contains about 0.2million points.
View 2 Replies
View Related
Apr 24, 2013
I have created a surface with a point group. I have a few points on the edge of my surface that need to be added to the surface. I can add them to the point group, but when I updated my surface nothing happens. The triangles don't extend to my newly added points and my profile of the area doesn't show a surface where these new points should be. the new points I want to add have the same properties as the other points in the point group, they are cogo points.
View 4 Replies
View Related
Aug 4, 2011
I need to do a cut/fill analysis not residential site and this site has like 6 retaining walls there is a 6 foot difference in grade.
My surface is not recognizing the grade change when I make the polyline into a wall breakline.
View 9 Replies
View Related
Dec 16, 2013
I am using AC3D 2014. I have created a surface from downloaded DEM points, but, as expected, the contours are not as accurate as I would like. They vary from known elevations anywhere from a few inches to several feet.
I also have survey data from approximately 500 points which include Northings, Eastings and Elevations. Is there a way to add these points to my existing contour surface and incorporate these know NEZ points such that he contour surface is more accurate?
I have already converted my "known point" file to a .txt format with comma delimited information.
View 5 Replies
View Related
Nov 9, 2013
I am having a lot of trouble adding retaining walls to my surface. I also have to add the curbs of parking lot.
I already have the surface. However I need to tell Civil3D to stop the contours at the retaing walls and not to try to tie them in to anything else. The closest I got was using wall breaklines and I got the top of the retaining wall to have the desired elevation. However, all the contours going to the retainig wall try to go around it and tie in to something else. This ends up creating weird contours and crazy slopes.
Now for curbs, how do I tell Civil3D to jump 6" when it reaches the curb line?
View 2 Replies
View Related
Oct 25, 2013
I am placing a lot of suface slope labels in my drawing (as in hundreds). The default settings force you to choose a surface, and then to place it by selecting 1-point /or/ 2 points. The CAD default is the 1-point. Is there a way to change this default to the 2-point so I dont have to change it everytime?
View 9 Replies
View Related
Nov 7, 2012
When adding data to a surface, there is the option to add it as a "Non-destructive" breakline. [URL] .....
What is this good for? I created a surface, copied it, and created a volume surface between the two of them. As expected, the resultant volume was 0.
I then draw a 3d polyline and snapped to elevations on the surface. I then took that 3d polyline and moved it up 5'. I then added that breakline to the surface as a "Non-destructive" breakline and the resultant volume between the original surface and the one modified with the new breakline was still 0. Absolutely no change was made to the actual surface, it just added additional triangles.
I'm trying to find a reason it's even option and I'm coming up blank. There has to be SOME reason it's there.
View 9 Replies
View Related
Jan 31, 2012
When adding break lines to a surface, a dialog box like appears that asks for weeding factors and supplementing factors. What I would like to know is, how can I change the defaults to reflect the settings needed on my project.
I am using C3D 2009.
View 6 Replies
View Related
Jul 11, 2012
I am working on a 6 mile highway project whose surface file is 85MB big. So, I created a Data Shortcut of this surface and used this for creating profiles. However, at some locations the corridors go below the surface(as per their original profile) which was not intended. So, I need to restrict the surface to follow the corridors but not go beyond it.
I have created feature lines from corridors and tried to add them as breaklines to the surface. But " error adding breakline" error pops up.
Is it because I am trying to add the breaklines to the mirror surface which I created from Data Shortcut ??
Will it be useful if I copy feature lines to original surface file and add these feature lines as breaklines in that file??
Windows 7 x 64
Nvidia Quadro 2000
24 GB Ram
i7 960 @ 3.20 GHz
Civil 3D 2012
View 2 Replies
View Related
Feb 18, 2013
I got this plan from a third person and, the point from the survey have the property " bloc ". In their attribute property, I can see the elevation value. but in the z of the actual bloc, it shows zero. I would like to tell C3D to use the attribute elevation for his actual Z in the drawing. How can I achieve this ?
View 6 Replies
View Related
Jul 12, 2012
Is there a way to display the projection (FL-W83) or Datum (NAD83) of a DWG file in the titleblock? Maybe using fields, or a diesel expression of some sort? I belive the information resides in the .NET framework, how can I get that into my titleblock?
HP Z400 Workstation
Intel Xeon W3550 -Cores 4
12GB Triple-Channel DDR3 @ 533MHz
2-HP LE2201w @ 1680x1050
ATI FirePro V3800 (FireGL) (HP)
MS Windows 7 64-bit
View 2 Replies
View Related
Dec 13, 2012
I've got a surface that I want to be semi-tranparent, it seems the only practical solution at the moment is to eXplode it so that layer transparency will affect it. Which is fine, I guess, for the time being (well actually it's not but we don't have much choice with 2013 do we?).
Putting that aside, my issue now is that every time I hover over the exploded block, it does a selection 'preview' which is distracting to say the least. So I want this exploded surface to be unselectable. Is there a way? If I lock the layer, it dims it, which I don't want. If I freeze the layer the exploded surface just disappears.
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
View 3 Replies
View Related
