ACA2011
How would one create a 3D rain gutter? I could make a profile of the gutter with a pline and then extrude it. Or I could perhaps use mass elements? How would I miter them on a corner?
I have started a new project in storm and sanitary 2014. I brought in my drainag areas from civil 3d with GIS import. I now want to add a rain gauge but this icon is grayed out. It does not give me the option of adding a rain gauge. Is there a setting I need to set in the project optinos to allow me to add a rain gauge?
View 2 Replies View Relatedcivil 3d 2011, Are there any good tutorials or videos on creating raised median divided roads with the bull nose.I am using one alignment and profile, the profile defines the lip of gutter of the outside lanes.
View 9 Replies View RelatedWhen creating a profile with right/left samples, the sampled profile does not show the gutter when crossing an intersection. If you do a quick profile of the area, it shows the gutters. See images below...
Sampled profile...
Same area with a quick profile...
creating a existing surface single Curb/Gutter spot elevation label using two existing surface elevation points and not cogo points. I am a surveyor, and I want to be able to just click on both points one at a time (top of curb/gutter) to place the elevation label.
View 3 Replies View RelatedHow'd they get the moving rain? Since I don't know imageready that well ...
View 5 Replies View RelatedI've got the rain already, but I also have a body of water in my pic.
How do I make the rain look like it's splashing/raining onto the water?
i am trying to clean up grayscale scans of line text to prepare it for ocr processing. i need to do three things in BATCH processes:
1) there is often some 'ghost text' that comes through from the other side of thinner pages when they are scanned, as well as some page texture. i need to strip these lighter gray marks without altering the black text. i don't want to binarize the text, as this reduces the text quality. just clear out the specific 'tone bands' of gray that are marking up the pages.
2) basic page splitting.
3) remove center gutter shadows left by scanning on a flatbed scanner.
Not sure this is possible. I'm modeling a box gutter using sweeps, is there any way I can join the 2x sweep?
View 1 Replies View RelatedHow did they do do the frosty glass effect on the lower left side?
how to do the rain drops...just not the frosty effect
I took this photo while it was snowing and there were two noticable water drops on the lens that created white marksglows.
How would I go about removing these marks? The big one is in the lower left. I also have the RAW file.
I'd like to make multiple copies of a .jpg I've made rain down from the top of the screen, ad-infinitum. Like, imagine small cat's heads raining down from the top of the screen.
I have foggy memories of an effect where I can just replace the default object with my own, but am having no luck finding it.
I am creating an image of a fantasy town as viewed from above (gods eye view) and would like to have rain drops falling upon the settlement from this angle and height. I'm just wondering what techniques and methods you would use to generate the effect of these raindrops. This is the only example of the kind of thing i'm talking about that I could find.
[URL]..........
I tried doing the pen tool frame by frame but it degrades the image. I tried doing a gain reducting but all it does is blur features and not even remove the rain. I looked up a computer science journal that gave a method with K-means clustering but I don't know how to apply it to AE..
View 5 Replies View RelatedCan't figure out how to match gutter slope to outside lane super subassembly slope. Have super eop targeting a feature line with elevations, but when i check section editor gutter slope doesn't match pavement slope.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
I have ran an analysis and SSA gave me Error 607 on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
I selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
How can I create watermarks in a 3d pdf? Is there a way to do this in AutoCAD before I convert it to a 3d pdf?
View 2 Replies View RelatedHow to create a tag and add it to my tool palettes for future use?
I am using AutoCAD Architecture 2012, and I want to be able to tag the bottom elevation of slabs in my drawings. I found I can create a tag by using the DEFINETAG command and I created text in there that is set to display the bottom elevation of slabs. I'm stuck as to where to go from here. I can't actually "tag" anything with this, and I don't know how to add it to my tool palettes.
I am using Autocad 2013 , and i have download many more hatch pattern from web , But i haven't know how to apply this hatch pattern in autocad 2013 .
View 1 Replies View RelatedI've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View RelatedI'am trying to create profile from opening.I have found interesting method : Profile.CreateFromProfile.But every time i call this method "eInvalidInput" exception is thrown.
I am trying to call method like that:
Profile.CreateFromEntity(entity, Matrix3d.Identity);
I'm using AutoCAD Architecture 2012. I cannot get the darn thing to create an Etransmit file. I'm sure it is some setting that I'm missing, but for the life of me I can not find it! It runs everything just like it is creating the file, but when everything is done, there is no file. I thought maybe it is creating the file somewhere that I didn't tell it to create the file at, but I can't find the file any where on my computer.
what I'm doing now is closing out 2012 and opening the file(s) in 2011 and creating the etransmit there, because it works. Is this a bug for 2012?
I already learned how to draw a plan of walls in autocad11 and make sure they have the desired height, so I can now draw a whole floor or story. But I do not know how to draw the one above it or under it.
View 2 Replies View RelatedI am working in Arch Desktop 2011 and need to make a wall for a upper floor and roof line with different plate heights. See the attached drawing for explanation.
What I'm trying to do is create an upside down "V" wall to fill in this area. This is an as-built drawing for an existing house with an addition.
I am attempting to create a cable tray. I have used Members, and Walls but neither worked really to my satisfaction. With the need for turns, ups and downs. How to accomplish this.
View 1 Replies View RelatedI wonder how do you create a concrete construction under the stairs?
The way ACA creates stairs looks like just a top layer (tiles or wood panels), but I want to put those tiles on a concrete construction.
Is it possible to create a terrain model in Architecture 2010? If so, how do go about doing it?
View 3 Replies View RelatedI'm new to the architecture package, but not AutoCAD. I just got training and this has stumped my instructor and me. We use half doors in our buildings and can't figure out how to design one. The door and frame that will finish @ 42" AFF.
View 3 Replies View RelatedI am trying to use a pline to create an open ended wall. When I try to 'calculate automatically' by selecting a pline the width of the wall (2 components 8" wide total) the dialogue comes up and asks which component I want to apply the endcap to. I want to apply it to both, but don't seem to have that option.
View 2 Replies View Relatedhow to create curved semi-circle stairs like the attached image?
View 9 Replies View Relatedsend me a link to tutorial to create a new cutom tab panels in a ribbon 2011
View 1 Replies View Related
