AutoCAD Architecture :: Wall Type With Batt Insulation?
Jan 17, 2012I can't seem to find a wall type that has the batt insulation in the middle (you know, the squiggle line representing insulation).
View 1 Replies
ADVERTISEMENT
AutoCad :: Variable Width Batt Insulation
Dec 23, 2013I have an area that needs batt insulation show in it that starts at 6" wide and go to 12" wide. Is there a lisp or hatch that auto scales batt insulation in the same manor a poly can do so?
View 9 Replies View RelatedAutoCAD Architecture :: Out Line Of Wall Type
Mar 30, 2012My boss wants me to make the most outside line of a walltype to be the heaviest pen. If I go to the properties of the wall and changethe boundary it changes the boundary of the item in the wall, each boundary independentfrom the other. Such as a wall made of the following: BRICK, AIR SPACE, SHEATHING,STUD AND GYPSUM BOARD. In this wall theexterior face of the brick and gypsum board need to be heavy.
View 4 Replies View RelatedAutoCAD Architecture :: Change In Detail Of Wall Type
Jun 20, 2012Since yesterday, when I try to draw any of our custom wall types all I get is a standard wall type image (rectangle only). None of the detail or component colors are displayed. When I start creating the new wall, the detail displays until I click at the end of the wall, then the detail disappears. When I ID an existing wall and a newly created rectangle the properties all match. I can copy and mirror existing wall and the correct display is retained. All of the existing walls in the drawing display and print correctly. The newly created wall print only the rectangle. Medium detail settings are in place. This has to be a local setting problem on my computer because others in the office can draw the same new wall in the same drawing and get all of the detail.
View 2 Replies View RelatedAutoCAD Architecture :: Walls Only Display Standard Wall Type?
Oct 24, 2013I'm trying to make walls that are not just the Standard type (Brick -4 Brick -4 Furring for example) but when I make a wall of this type, it displays as a simple rectangle, instead of with the unique hatch patterns of that wall type...In the properties palette, the wall type is Standard, even though I've chosen a more specific wall type. How do I make walls that aren't Standard?
View 1 Replies View RelatedRevit :: Single Schedule With Wall / Roof And Slab Insulation
Jun 11, 2012Our model uses several material types for insulation, mostly rigid variations at this point. The various materials are used in floor, wall and roof systems. Is there a way to create a single schedule that would list insulation quantities across all three system types?
View 2 Replies View RelatedAutoCAD Architecture :: Make Steel Deck Roof With Mineral Wool Insulation
Jul 30, 2013I want to make a steel deck roof with mineral wool insulation on top. My problem is that I don't know how to do the metal deck.
It should be a slab, a roof slab or a structural member? How do I create it? I attached a drawing with how it should be.
AutoCAD Architecture :: Inserting Gypsum Board / Wood Siding / Insulation Into Drawings
Jan 7, 2014I need to insert gypsum board and wood siding and insulation into my drawings.
View 1 Replies View RelatedAutoCAD Architecture :: Make Cylinder Wall Or Closed Curved Wall?
Jun 3, 2013I can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedAutoCAD Architecture :: Wall Style Creation (Window To Cut Only One Portion Of Wall)
Dec 7, 2011I'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
AutoCAD Architecture :: Wall Intersection Clean Up For Different Wall Types
Jun 12, 2012I am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.
View 9 Replies View RelatedRevit :: How To Get Wall Sweep Set Up In Type / Structure Properties To Wall Profile Has Changed
Apr 12, 2012Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedAutoCAD Architecture :: Convert Curtain Wall To A Wall?
Apr 14, 2011I can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?
I simply want to convert an existing curtain wall to another wall type how is that done/
Revit :: Changing Length Of A Wall And Wall Type?
Oct 31, 2013When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
AutoCAD Architecture :: Snapping To Wall End
Apr 19, 2012I used to be able to snap to the end of the linework that form the visual end or intersection of walls while grip dragging a wall of one style to another. For example, using a wallstyle as a countertop, I'd be able to drag it to the corner of a room and use object snap to the intersection. In ACA 2012, the object snap defaults to the justification plane of the wall even if that's not where the intersection snap is desired.
View 6 Replies View RelatedAutoCAD Architecture :: Wall Grips / Osnap
Mar 27, 2013I quite often like to use the wall grips to adjust the length of a wall. This works really well accept for the occasional situation were I want to snap to the face of another wall rather than the justification line. I know that I can snap to the face of a wall rather than the justification line because I have some files that it works fine in and other files that it does not work in.
View 2 Replies View RelatedAutoCAD Architecture :: Convert Lines To Wall?
Aug 5, 2012In Revit there is a tool to convert lines to walls including lines of an xrefed AutoCAD file. Is this feature available in ACA?
View 3 Replies View RelatedAutoCAD Architecture :: Wall Tool Not Allowed?
May 16, 2012I did a drawing in ACA2011 sent it to my remote office where I have ACLT for mac 2013 (trial). Worked on the file,
had to explode the couple of walls I was editing, saved as 2011 or 2010 file.
When I open the file in ACA2011 I can not execute the wall tool. This is the message received:
Command: _AecWallAdd Command not allowed because drawing contains objects from a newer version of this application.
The new objects would be lines.
AutoCAD Architecture :: Moving Doors Within Wall?
May 24, 2012have trouble moving doors or windows within a wall?
I am trying to move a door so that the door is flush with a face of wall. The prompts in acad do not match the instructions.
For instance; select door, okay. then from anchor panel select 'reposition within wall', okay a red line appears and prompt to 'select position on the opening'. okay so i click the face or side of door jamb then select a reference point. (guide says select point to measure to) and on and on. Door never moves.
it should be; select door, select reposition in wall, select reference point (interior, exterior, midpoint), select the desired location. Done.
Instead it is select this that and the other , measure from here, select, click.click click.
AutoCAD Architecture :: Wall Brake At Window
Mar 8, 2013In AutoCAD Architecture 2012: when we insert standard windows in the wall, we usually get a wall break. After changing window size to small (2’ high), this wall break disappears in the plan, but still have it on isometric or perspective view.
View 1 Replies View RelatedAutoCAD Architecture :: Variable Width Wall
Apr 30, 2013Is it possible to create a wall in AutoCAD Architecture that will change in size along its length. At one end of the concrete wall the wall thickness is 12", at the other end the wall thickness is 24" thick. The wall will grow in size from one length to the other.
View 6 Replies View RelatedAutoCAD Architecture :: Switching Wall Types
Jan 16, 2012I have received some architectural models which were modeled in AutoCAD MEP and only have walls modeled as type Standard. Is there a way to transform Standard walls into cavity walls etc., giving wall makeup as you go - or do I have to re-model in order to get quality 2D cuts?
View 1 Replies View RelatedAutoCAD Architecture :: Adjusting A Wall Under A Stair
Oct 21, 2013I'm just trying to put a wall under a stair and it seems like I can not succeed. Already tried with interference, body modifiers and trimming.
View 2 Replies View RelatedAutoCAD Architecture :: Window Not Placing In A Wall?
Feb 29, 2012Why would a window not go into a wall?
I have a client who is having this issue - when I open the file it works fine for me.
Is there a system variable or setting that could cause this?
AutoCAD Architecture :: Wall Component Won't Update
Apr 11, 2013I've got a wall style that has multiple components. I have changed one component so the bottom starts 12" below the baseline ht of the wall.The section window display reflects the change, but the wall style won't update.Is there a setting I'm missing somewhere.
View 2 Replies View RelatedAutoCAD Architecture :: Scheduling Wall Styles
Dec 16, 2008How to group wall types together when scheduling a drawing?
I have multiple wall types within a drawing but scheduling produces multiple entries per type depending on length, only grouping them together when lengths are identical. All I need is a total length per wall type within the drawing.
AutoCAD Architecture :: Unable To Create A Wall
Mar 18, 2013I've been having an issue with autocad architecture 2013. For some reason it won't let me create a wall. I can click it but it doesn't want to actually create anything. It just gives me the selection tool. I downloaded the service pack and still doesn't work.
View 3 Replies View RelatedAutoCAD Architecture :: Wall Style Hatch
Apr 12, 2012I have two created wall styles, one is a stud wall with gyp bd each side, the other is a cmu wall with gyp bd each side. I want to use a solid hatch which I am able to do but the problem is one wall style the stud hatch is HATCH 1 and in the other wall style the CMU hatch is HATCH 2. It seems as though the two wall styles are tied together some how for if I turn on / off a hatch in one of the wall styles it turns on / off the hatch in the other wall style.
View 4 Replies View RelatedAutoCAD Architecture :: Hatch Within Wall Not Joining?
Apr 26, 2011Another little problem off the big list. Up until now i have been using Autocad Architecture 2009 but recently upgraded to 2012. For some reason though, my hatches are now no longer linking on wall corners like the attached drawing shows.
View 2 Replies View RelatedAutoCAD Architecture :: Curved Curtain Wall
Feb 9, 2011I have a curtain wall I need to make, but I need it to be curve on elevation. Its an arch. I can do it on sketchup but I need autocad precision to establish the modules. I have this division settings, horizontal 3.111 vertical 3.559m.
The profile arch has a 40.062m radius. 27.741 arc length. and a total angle of 39.673.
My question is, how can I bend the curtain wall??? I can make a flat curtain wall to follow my referenced base curve, but I need tu curve it in elevation. Here is a demo view from sketchup.What i'm trying to do is the coloured face.
AutoCAD Architecture :: Wall Corner's With Timbers
Aug 6, 2012I'm trying to draw a wall in plan that has Wood Timbers in the corner. The problem im having is that if i use a Body Modifier it puts dark heavy lines within the wall. And Plan modifiers don't seem to be working. I tried to use an interference condition and that also did not do the trick.
I tried to force a cleanup and that did not work either.