I was in Block Editor and when I hit the save changes button it closed my drawing. Now when I open the drawings, the only thing in it is the block, but it is exploded. I can not find any of the information that was in the drawing. The file size is still 1.3 MB. I would have to lose the 3 hours of work I have done and go to a previous version file of the drawings I was in.
View 6 Repliesi use autocad lite 2012 and it works fine except for when i edit a block (either block editor or block in place) when i open the block i can edit it fine but then when i go to close the block and save changes my computer will usually lag and most likely autocad will crash. i then lose all the work that i did in the block. i don't know how to fix this problem but it takes time out of the day. and always have to redo the work.
sometimes editing the block will only lag when it closes for after 10 seconds and other times it never goes back to the model and cad crashes
a side note is that i tried REFEDIT and the same problem still happens.
AutoCAD 2010. I was editing a block in the block edit screen and it wouldnt save the block. My screen froze and I had to reboot the computer. Now when I open the drawing it is still in the block edit screen and I cant get out of it.
View 9 Replies View RelatedI will double click into a dynamic block to edit it in Block Editor. None of the blocks dynamic attributes will show up. Then I try to exit the block using either "bclose" or by clicking "Close Block Editor" and get this message: "bclose command only allowed in block editor". Um... hello Autocad, I'm in the block editor.
My only option at this point is to close the file... CAD politely asks me if I want to save my changes, and unfortunately I made the mistake of saying yes the first time this happened. If I choose to save the changes, when I re-open the CAD file it will only be the block that I was editing! It purges everything else in the file (and it is apparent that it only saved the block b/c my file size is much smaller than the original). The backup file is also only the blocks information, b/c CAD believes it is saving correctly. My other choice is to not save, and lose all of my changes since the last save or since the last autosave.
I used to be able to hold the ctrl button down and double click a block attribute to directly change the text (_attipedit) but when I shared this drawing with another AutoCAD user who returned the drawing that double click to edit is missing.
View 2 Replies View RelatedI'm starting to wonder if I need to reset my program. When I click on my blocks, it won't allow me into block editor. I checked, and my Blockeditlock variable is set to zero, which should allow me in. But alas, it does not. When I type in "blockeditor" it says "read only". Which it's never done before.
View 3 Replies View RelatedIs it possible to change the background color in Block editor from white to black?
View 2 Replies View RelatedWhen I attempt to close a drawing I get the following message in the command bar. _CLOSE command CLOSE is not available under SDI mode. and the drawing will not close. what SDI mode is and how I can close the drawings.
View 3 Replies View RelatedThe "X"'s in the minimize, maximize, close space are missing from drawings and the recovery manager. I have to close Acad and restart to get them to reappear.
View 9 Replies View RelatedI have created a bock in ACAD 2011 LT. I then save the block using the command line or ribbon button then immediately try to close the block editor without moving or changing anything. A dialog appears saying the changes have not been saved to the block and would I like to save? If I say no don't save my changes and reopen the block the changes have in fact been saved.
My question is there a way to get around this dialog box -Suppress it like FILEDIA = 0 for block editor or an option so it doesn't ask me to save.
The goal is to do this all from the command line w/ out dialog boxes.
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
My drawing- block is a little bit complicated, it contains few actions and parameters and everytime i open block editor to add, or to modify some action I can't see my drawing because actions grips and parameters grips obscure my drawing. I tried to refresh layout but it doesn't work.
please take a look on attached jpg.
When the block is in a drawing and I click it, it takes me to block editor.
However if I go to it in block editor and test block it allows me to change the attributes.
Why does clicking the block go to block editor and not allow me to change its attributes as it does when I test block.
I want to move the base point of a block in the block editor. However, when I move it, the block moves accordingly in the drawing.
How can i move the base point in the editor, so that the block stays at the same position in the drawing.
I was in process of editing a block in "block editor" mode. I saved the dwg and exit instead of saving the block, exit block editor and then exit the dwg. When I opened again the dwg what I see on display is just the block. How to close the block and open the entire dwg?
View 2 Replies View RelatedI'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
I have several blocks saved as separate .DWGs, some of which are dynamic. I want to review and test these blocks, but I can't find a way to open the existing block definitions in the Block Editor without first inserting the blocks into a drawing.
View 5 Replies View RelatedI'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View Relatedhow to make a routine for zoom extents, save all, and close all open drawings in a single routine?
View 3 Replies View RelatedI cannot close my editor window /screen in elements11 as it seems to be frozen and chimes everytime I hit a key.
View 3 Replies View RelatedI'm having an issue where AutoCad Architecture 2011 is crashing on some but not all machines (4 total) when a file is closed.
We are also getting what appears to be random slow downs on files when opening and a jumpy mouse that makes drawing impossible. I have not been able to establish a pattern to point at specific files to being the problem as it happens across several the are fine one day, not fine the next and fine again a day later. All stations are identical.
Win 7 Pro - 64 bit
Intel Xeon cpu 3.60Ghz (2 processors)
9 BG RAM
NVIDIA GeForce GT 240
why I get an exclamation point error message upon closing an AutoCAD file? And it can be two or three of the same error. That is, I close one error message and another follows it.
View 1 Replies View RelatedAfter doing a few renders, my drawing now reverts to wireframe every time I close it, save it, regen. how to stop this from happening? It will basically not stay in 2D wireframe and the dwg has become very sluggish.
View 3 Replies View RelatedI have a block containing several parts blocks. When I explode the main block all of the parts are exploded back to lines. I have used both "explode" and "xplode" and have the same results. How can I explode so I have my components as blocks?
View 6 Replies View RelatedI'm using ACA 2011
How do I configure dwg to pdf output to version 5, many customers do not have Reader 7 and have no intention of downloading the newer reader. I see no area in the Plot Configuration Editor??
What’s up with that
Currently once I have finished a drawing I print to PDF and send the drawing out to document control for distribution. Eventually I get some feedback that a few things on the drawings need to change.
This involves me
1.) Modifying the original dwg file
2.) Printing to PDF
3.) Opening the PDF with PDF X-Change viewer and drawing revision clouds and other notes on top of the PDF
3.1) I could also replace the PDF with DWF files, but then I would still have to make revision clouds and notes on the DWF file. But everyone uses PDF so I stick with PDF.
4.) Issuing back to document control for distribution.
Is there another way to make redlines within autocad so that changes will show up in red?
- Move a wall? Its red.
- Add a drawing and viewport to a paperspace tab? Its red.
- Add more text to an mtext or dtext object? New text is red.
I am looking for ideas other than moving those objects to a new layer, or manually coloring them red. I like the way Microsoft word has a track changes button, where everything I delete goes red and gets a line through it, and all new text is red.
I have just downloaded AutoCAD Architecture 2014 and am finding the materials editor difficult as I am used to using the 2010 materials editor. Is there a way of changing the editor back to 2010 or is there a basic tutorial available on how to use the 2014 material editor?
View 1 Replies View RelatedSeveral users here in my office have been having a strange issue with ACA 2011. When doing various things such as, saving, regen'ing, or manually switching between open drawings, ACA will "blink" to a completely different drawing.
For example, right now I have 4 drawings open. I'm trying to go from drawing A to drawing B. It goes to drawing B and starts to regen model space, then it blinks back to drawing A. Does the same for any of the 4 drawings. Only way to make it stop was to close drawing A.
As I said, it not only does this when switching drawings. It'll also do it after it's done saving and when I try to regen.
AutoCad Architecture 10, How can you copy blocks to different drawings?
View 2 Replies View RelatedIs there a procedure or command to use on an opened drawing to see if the drawing is used as an external reference anywhere else? For example, can I open Drawing A and determine whether it is used as an external reference in Drawing B without going to Drawing B and looking at the external references palette?
View 1 Replies View RelatedI am building finished piping assemblies from a collection of smaller parts I have been creating and saving with WBLOCK. I found a mistake on one of my parts(I needed to rotate a piece of pipe). Because the sub-part was part of the complete assembly, I could not rotate the sub-part independently so I opened the block in the block editor. Apparently, and this was my original question, UCS commands do not work in the block editor. The result of this fact was that I could not rotate the sub-assembly in the direction it needed to go. So first question: Can the UCS be moved in the block editor?It focused on exploding blocks that would not explode. I thought if I could simply explode the block back into its component parts, I could rotate the sub-assembly. This is where everything went to hell.
I am not even sure what happened but now I have a new definition of the block that will still not explode, references itself, includes other parts I don't want and is just generally making me PDM. I figure it will be easier to just delete the entire block and redraw the components rather than trying to fix my mess. I did try the undo command but it apparently will not undo the changes to the block definition. Second question: How do I remove all traces of a block saved with BLOCK and WBLOCK so I can start fresh?
Third question: I will not create another block until I learn more about them. Any reference related to intelligent block creation?