AutoCAD 2013 :: Stretching Skewing Perspective Correction Of Pictures?
Dec 24, 2013There is a script here but it is not finished and I don't know if it ever will be... Any tool that can do this in AutoCAD.
View 9 Replies
ADVERTISEMENT
Photoshop :: Custom Warp After Skewing Or Altering Perspective Not Working Properly?
Feb 18, 2012I'm using Photoshop CS3, and the warp tool seems to behave differently after performing the skew or perspective transformations. If I try to warp after doing one of these two transformations, I am unable to click on any of the points or handles. The only thing it will let me do is alter the lines, but the points themselves cannot be moved. What am I missing?
View 6 Replies View RelatedLightroom :: Vertical Perspective Correction In 4.2?
Oct 8, 2012I recently purchased LR 4.2. I already have PSE 7 and have used it for several years. I have been trying to straighten verticals in photos of tall buildings, old courthouses, etc. where I had to point the camera up to capture the image I wanted (capture the highest spire and the base of the building and a little of the surrounding area). Photos taken like this end up "leaning" backwards quite a bit and, if shot from an angle especially, some of the verticals are seriously disorted (not just perspective). I usually line up on one vertical side when taking the picture; this results in the vertical on the other side being stretched outwards at the bottom compared to
PSE has a filter that allows you to correct camera distortion including vertical perspective that works pretty well. PSE also has some distortion functions that allow you to stretch, skew, or free distort an image. I use skew to take the side of the picture where the bottom is wider than the top (sloping from top to bottom, left to right sort of like a slash "/" character). I select the bottom, left corner and pull it in until the vertical looks about right.
So now that I have LR, I wanted to see how its distortion correction worked compared to PSE.
I took one of these photos like this and adjusted it in LR. The first thing I noticed is that LR does not have any skew capabilities. It can't correct for more than relatively simple vertical and horizontal distortion. That's disappointing because I don't really want to export my file as TIFF, import it into PSE, then convert it to 8 bits (my version of PSE won't do camera distortion or stretch/skew adjustment on 16-bit images), adjust it, then export it back out to my TIFF file, then import that file back into LR.
The other oddity I've noticed is that the vertical perspective correction in LR tends to stretch things vertically when large amounts of vertical perspective correction are applied. What happens then is that an old style courthouse which has a a smaller dome on the top, the smaller dome gets stretched vertically and becomes more "skinny" - taller and thinner. So the vertical distortion correction, in large amounts, just introduces more vertical distortion by vertically stretching the image. PSE, on the othe rhand, corrects the vertical distortion but does not change the proportions of the subject significantly - no vertical stretching.
1) why does LR offer perspective and horizonal corrections but not distortion controls like skew?
2) why does LR vertically stretch my subject when I use a lot of vertical distortion adjustment when PSE does not, and what (if anything) can I do about it?
Photoshop :: CS6 / Perspective Correction With Arrange / Tile All Vertically?
Aug 25, 2013With either Photoshop CS6 or Photoshop CC, opening an unadjusted image of a building and applying Image/Duplicate produces an exact duplicate of the image. If arranging the images using Window/Arrange/Tile All Vertically (or Window/Arrange/2-up Vetical) one of the images will present with a perspective correction. Whichever image that was selected when Arrange was applied receives the perspective correction.
View 6 Replies View RelatedPaint Shop Pro :: Removing Perspective Correction Rectangle?
Dec 20, 2011After I tried to correct the perspective of a building I couldn't remove the rectangle. Every time I uploaded a picture, the rectangle was there. How can I close it?
View 5 Replies View RelatedLightroom :: Paint With Clone Tool Out-of-Canvas Areas Created By Perspective Correction
Oct 29, 2013In Lightroom 5 I really like the Perspective Correction tool which always produces white Out-of-Canvas areas as a result of image deformation.As a "constain crop" very often would cut out a lot of interesting details, I love to Crop the image a bit wider.The problem are the white areas remaining that were not present in the original, undistorted image.I would love to fill them in with the Clone Tool, but it does not seem to work on those areas!
To make a complicated story simple just look at this image:My aim here is to fill in the bottom left white by simply cloning the missing part of the column.This is a super-easy job which I could do with Lightroom clone tool in seconds. Shall I report it as a BUG? (if so, how?)
AutoCAD 2013 :: Dynamic Block - Stretching Into Different Sizes
Dec 4, 2012For my AutoCAD class we are supposed to make a dynamic block of a basic theater flat which we can then stretch into different sizes. I was able to do the vertical stretch no problem, but when it comes to the horizontal stretch, the lines do more of a move action then stretching. I have redone it several times but it still won't stretch properly.
View 1 Replies View RelatedAutoCad 2D :: Selection Stretching / Zooming When Trying To Move Object In 2013
Aug 23, 2012I have recently upgraded to 2013 from 2007 and I am having some weird trouble with the move command. I will try to explain.. I type the move command and then select a particular object I would like to move a little and it grabs some (not all) of other objects/lines near it and then stretches the lot in all directions! It actually doesn't allow me to move it at all without stretching/extending all these areas. I have tried everything I can think of and am not sure what I am missing. I thought it was somehow related to the polyline I was selecting, but it does it to single lines as well.
View 2 Replies View Related3ds Max Animation :: Skin Morph In 2013 - Skewing Vertices Side-to-side Locally
Jan 4, 2013The problem I'm having with Skin Morph is that it's skewing my vertices side-to-side locally.
I'm using Skin Morph to better preserve the volume around the two joints of each finger of my hand model (See Arm1).
The two skin morph targets were created for the index finger while it was in the same position as the second image (Arm2).
I repeated this process, creating skin morph targets for the other two joints on the three other fingers and on the thumb.
The problem comes when I rotate the knuckle joint in any axis, in the third image (Arm3) I've rotated the knuckle downwards and you can see the vertices affected by the Skin Morph modifier have skewed to the left. When I turn the modifier off the vertices go back to their original position - so the problem isn't being caused by something like non-uniform scaling of my model (I reset the transforms before skinning).
The fourth image (Arm4) just shows the basic child/parent relationship that I've setup with the Bones and SplineShapes.
The fifth images show the (perhaps strange) position of the Driver Bone Matrix and the Morph Bone Matrix which could be constributing to the problem somehow.
I've uploaded the file so that you can explore my scene. armrigskinmorphproblems.zip
3ds Max 2013 64-bit Student Version
nVidia GeForce GTX 560
Windows 7 64-bit
Intel i7
AutoCAD 2013 :: 2 Point Perspective View Of Model
Jul 9, 2013Im currently trying to set up a 2 point perspective view of a model ive recently designed.
I have an image set as the background and i would like to align the model in perspective to the image.
My issue is Dview and free orbit and giving me any kind of reasonable perspective.
Is there any other methods i might be able to try to improve the results ?
AutoCAD 2013 :: When Saving Switches To Perspective View
Mar 21, 2013On some 3D models, when I save the drawing, it automatically switches to perspective view and turns the sky background on. This is irritating.
I found this old thread in the AutoCAD Architecture area from 2010
[URL]....
Even setting the sky background to 1, then 0 doesn't work. When I save, it reverts to a perspective view and turns the sun/sky back on.
AutoCAD MEP 2010 64 bit
Revit Architecture 2010
Windows 7
AutoCAD 2013 :: Viewports Change From Perspective To Parallel After Reopening Drawing
Mar 5, 2013I set a viewport to a perspective mode. I do this by starting 3DOrbit then right clicking and choosing perspective. Save, close, open and all perspecitve views are set to parallel projection.
View 9 Replies View RelatedAutoCad 2D :: Skewing Block Vertically / Horizontally?
Jan 2, 2014I find at least once every project I need to do something like this (skewing/forshortening). If I make a section view of a set design (cutting right through the stage), I'll do that by taking my set elevations and skewing them.
the solution, painstakingly outlined in VIDEO FORMAT, and annotated..?
When you get back up and running, here's a full demo of both the 2D and 3D methods described [URL] ......
AutoCAD 2010 :: Move Command Skewing Lines In File
Jun 9, 2012When I use the move command to, let's say, to move a floor plan (drag to new location on the page), some of the lines in the "moved" floor plan are either skewed or missing. I'm able to "cut and paste" as welll as "copy with basepoint" w/out problem.
See attachment below.
How might I correct this problem?
AutoCAD 2013 :: Sending DWG File With Pictures?
Dec 7, 2013im trying to send a dwg file with pictures which but the pictures dont show up. i created a zip file using the etransmit option and the pictures show up in the file but you can not see the actual picture on the dwg file, only its path. is there a way i can send the file that the picture shows up on the dwg?
View 6 Replies View RelatedPhotoshop :: How To Resize Image With / Without Skewing
Feb 29, 2012Im creating an app and have to resize a single image to fit for android, iphone,ipad,ipad 2...all different dimensions. I resize my images but they are distorted or look fuzzy?
View 5 Replies View RelatedPhotoshop :: Skewing/turning An Image
Sep 29, 2008how do you take an image and bend it so that it looks as though you're looking at it from an angle?? Example, let's say I've taken a screenshot of a webpage and I've created a new image and pasted it - now I want to take that image and turn it, say 15 degrees, so it appears as though I've turned the monitor...
View 1 Replies View Related3ds Max Animation :: Skewing Parts After Linking?
Sep 29, 2011I’m having a problem with a part being skewed after it’s been linked to another part. This only happens when the part that it was linked to rotates.
3ds Max 2013/2014
Autodesk Inventor & AutoCAD
HP xw8600 Workstation
Windows 7 64Bit
Dual Intel Xeon 2.83 E5440 GHz
8.00 GB of Ram
Illustrator :: Skewing Picture To Particular Shape?
Sep 7, 2012I have drawn a shape as a template for a picture which I want to skew into the same sort of shape. I have tried various tools (including Shear, Free Transform, white arrow and arrow +, ...) but I cannot get it to go into that particular shape, though some have moved it towards the shape, but not exactly.
I thought this would be easy, just using the white arrow and selecting one corner point at a time, moving it to the place I want it to be.
Here is the shape (the yellow part):
How can I get my picture into that shape and angle?
Xara :: Skewing Or Warping A Bitmap Fill With The Handles
Feb 16, 2011Is there a way to have the bitmap fill of an object stretch a skew with the object as the handles are moved?
View 1 Replies View RelatedAutoCad 2D :: Stretching Ellipse Arc
Jan 4, 2014I'm trying to make a (for lack of a better term) squarish ellipse.
I've tried a few things but they don't work too well, i.e. plines and lofting a rectangle with an ellipse then cutting it two but they just get me arcs that meet at sharp points.
The jpg below is meant to show what I'm trying to do.
I want to take that one quarter of an ellipse at the intersection and stretch/pull it to the midpoint of the line between the corner of the rectangle and the arc. The ellipse is made out of 4 ellipse arcs. I want to stretch just the arc without moving the ends of it at the quadrants.
GIMP :: Pictures Worked With It Cannot Be Shown At TV (2013)
Jun 25, 2013all pctures, I have corrected with Gimp 2.8 and exported them in the origin Format (*.JPG) Cannot beshown on my TV by USB.
Linux Mint Version 13 (maya) (64-Bit)Kernel Linux 3.2.0-29-generic
AutoCAD VB :: Stretching Selected Object
Aug 15, 2012I am writing a code to select an object (crossing) and to stretch it a certain distance on the y axis. This is the code that I have to select the object, but I cannot find what to use to stretch it. I actually found something to scale it, but it is not what I need. With ThisDrawing.Utility
Dim SP1sel1(0 To 2) As Double
Dim SP1sel2(0 To 2) As Double
Dim objSS As AcadSelectionSe
Set objSS = ThisDrawing.SelectionSets.Add("zzadsaaafatt")
' Select the object
[code]....
AutoCad 2D :: Stretching Dynamic Blocks Along An Arc?
Mar 13, 2013I have a 4' light fixture that is a rectangle. Right now I have it set up to where I can stretch it and it copies it’s self whatever length that I stretch it in increments of 4'.
Is there a way for me to modify this so that when I stretch it along an arc, that it copies its self and rotates its self along the edge of the arc?
AutoCad :: Dynamic Block Stretching
May 7, 2012I am trying to make a block that I can stretch. The end pieces (gusset block) never change size. The only piece that needs to stretch is bar that connects them. The gussets are always on a 45 degrees. If I stretch it over 5 inches on the X axis, it should move -5 on the Y axis.
View 4 Replies View RelatedAutoCad :: Stretching Width OR Height?
Jan 27, 2013Suppose I have a rectangle 10 x 8 and then I join the middle points of the widths with a line ... so I will end up with 2 boxes of 5 x 8. Now what I need to do is to stretch the side by 2 units to become 12 by 8 but I want the middle line to move automatically during the stretching process so I end up with two boxes of 6 x 8.
View 9 Replies View RelatedGIMP :: Unable To Open Pictures In Olympus RAW (2013)
Sep 10, 2013Was just trying to open some older pictures from my Olympus.But GIMP does not recognize the Olympus RAW-format, i.e. the ORF-extension. How to solve ?
View 4 Replies View RelatedAutoCAD 2010 :: Variable For Stretching With Grips?
Jun 24, 2011know of a variable which controls how stretching with grips works. I've got a single machine with Autodesk Architecture 2012 that when I select a grip and move it, then type a dimension in the command line, that the line becomes the dimension I typed, not the amount I moved it. For example, If i have 10" line, select and end grip, stretch it +3 inches or -3 inches, the line becomes an absolute of 3 inches. On all other machines, the line would either become 13" or 7".
[URL]
The dynamic input is off.
AutoCAD 2010 :: Stretching A Line With Grips
Feb 25, 2012I use to be able to stretch a line by using the end grip and typing 50 , this would extend the line by 50 units
The problem i now have is that if i do the same thing thing , the line instead of strecting 50 units the line becomes 50 units long in total
is there a system variable that controls this ?
AutoCAD 2010 :: Stretching Or Segmenting A Drawing
Jun 25, 2012I Have a drawing that I want to get laser cut, its not a functional piece it is just going to be something that is hung on the wall.
I first drew the piece in 3D inventor then converted it to a DWG so that i can edit it in Autocad (ive been told by the laser cutter that they can process DWG drawings).
No two lines on the drawing can intersect however as i dont want the laser to remove large chunks from the peice. The problem im having is that i have to go through manually and select each line, then select the end point and then shrink it by a certain value. Since the drawing is quite a large drawing its becoming very time consuming
I cant switch the line types however because no matter what the line type when convereted to NC code the computer sees it as a solid line
ive attached a screen shot to try and explain what i mean
the one on the right is one a section that i have finished modifying and the one on the left is one that i have yet to change
AutoCAD Civil 3D :: Stretching / Adjusting Contours
Oct 28, 2013We are currently STILL in the transition from LDD to Civil 3D 2013. Is there an easy way to stretch the contours within a surface without physically editing the surface. Right Now, I have a couple contours that have have spikes in them from lack of survey data. The Problem is that if I don't change the contours, I have to show steep slopes between them which I would rather not do.
Do I have to keep editing the surface to try and resolve this problem or is there a way I can just stretch the contours?
Right now I resolved the problem by coping the surface, exploding it and putting the contours on a different layer so that I can stretch them as I see fit But this is not a time effective solution.
