AutoCAD 2013 :: Copy Of ACDs / DLL File
Jun 12, 2012where can i download a copy of acds,dll file as this appears not to have been included in my installation of Acad?
View 1 Replies
ADVERTISEMENT
AutoCAD 2013 :: Copy One File To Another File Of DWG?
Jan 9, 2013Does not give the option to copy one file to another file of DWG What to do?
View 6 Replies View RelatedAutoCAD 2013 :: SHX File Embedded In Copy / Paste
Jun 13, 2013If I copy a single line from a file then paste it into a new file with nothing in it and save, I end up with a 3 or 4 meg file. I noticed when I paste the line into the new drawing, I get the following message over and over:
Substituting [simplex.shx] for [OA_Edina.shx].
Substituting [simplex.shx] for [OA_2007.shx].
We have files that are 20 or 30 meg that should only be 1 or 2 meg. Purge and audit in the .dwg does not work. One way to fix it is to dxfout then purge and audit the .dxf file, then save back to .dwg. The audit typically finds tens of thousands of errors. This process takes a long time and the problem comes back as soon as someone copies something into the file. We need a more permanent fix.
AutoCAD 2013 :: Cannot Copy / Paste Object From One File To Another
Oct 16, 2012When I try to Copy & Paste an object from one file to another, appears following alert window: “This application has detected a mixed version of AEC objects participating in this operation. Newer AEC objects will be disallowed from participating in this operation”. And I cannot paste the object copied from other file. This happened to me when I work with Autocad2010 using drawings saved as Autocad2004 in Autocad2013.
Since I am working in a group of people that have different versions of Autocad, I need the solution for this problem.
AutoCAD 2013 :: Copy Command Terminates After Single Copy - No Multiple Copies
Jan 3, 2013I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies View RelatedAutoCAD 2013 :: Copy And Move Command But Not With Copy With Base Point
Apr 21, 2013I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
AutoCAD 2013 :: Copy Settings And Toolbars From 2013 To 2014?
Dec 20, 2013Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCAD 2013 :: Backup Copy Of 2013 Disk
Apr 12, 2012We just got our new 2013 disks and I was going to make a backup copy like I usually do (it worked for 2012) and my backup software says there is not enough room on a standard DVD-5 to fit. So did Autodesk use some copy protection or did the install disk get so big it must go on a DVD-DL?
View 6 Replies View RelatedAutoCAD 2013 :: Copy Linetype Definition From Drawing To Linetype Definition File?
Nov 14, 2012How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedAutoCAD Inventor :: Changing File Action From Reuse To Copy File
May 20, 2013I am copying a design in the vault & when i go through all the files to ensure they are all to 'copy' there is several which I cannot change their status from 'reuse' to 'copy'
I don't have any of the files checked out & they are all the latest versions.
AutoCAD Visual LISP / AutoLISP :: Copy Shortcut C Doesn't Copy Multiple But Typing In COPY Does
Aug 23, 2013I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
AutoCad :: Copy And Place A File Into Another - File Too Big
Apr 20, 2012Autocad 2010 C3D. I have been trying to copy a file and place it in another but when I hit the copy command the hourglass comes on then nothing. I go to the Task Manager window and it says AutoCad is not responding. I have tried to copy a small portion and it works ok. The original drawing came from a DGN but I haven't had problems with this in the past. They just haven't been this large.
View 8 Replies View RelatedAutoCAD 2013 :: Copy To Clipboard Failed
Feb 17, 2013Whenever I select some objects in an AUTOCAD drawing and Press Ctrl+C to copy them for taking it to any other file, it gives error "COPY TO CLIPBOARD FAILED."
However, this error is not for all the files but in some of the files. After much tweaking and researching on my own, I found out that this happens in files in which I have set viewports in LAYOUT. When i delete the entire LAYOUT by right Click + Delete, and then go to MODEL and do Ctrl+C, the copy to clipboard happens in normal way.
Why do I get the error when I have set viewports in LAYOUT ?
AutoCAD 2013 :: Unique Copy N Paste
Jul 15, 2013I cannot seem to paste into this one drawing that a client has issued to me. I can paste into all associated x-refs just fine, but the main drawing is the issue. Before we get into things I have tried all the most common things already.
- I have checked layeer Visibilties and unreconciled layers.
- I have run audit and have purged/scalelistedit all drawings
- I have done almost everything ><
To sum it up I think it is global variable of some sort.
AutoCAD 2013 :: Copy / Paste From One Drawing
Oct 19, 2012We installed 2013 version of Autodesk Civil3D, and strange things with Copy/Paste from one drawing to another happend!
If I try to copy some autocad objects like solid HATCH for ex,. from one file to another - I select drawing copy from, select Hatch, press Ctrl+C or rightclick > Clipboard > Copy, then select destination drawing, press Ctrl+V or rightclick > Clipboard > Paste, and I see in command window:
" _pasteclip Duplicate definition of block _Closed ignored.Duplicate definition of block _DotBlank ignored."The time interval is very long for single hatch copying.
I tryed audit/purge, and copying the HATCH again, - and now I see in destination drawing some strange array of LINE obects, it is not my HATCH! AutoCAD always starts do temporary save while doing this copy.
Else, if I open new two pure drawings, and start copy any types of acad objects between each other, so all works fine and quickly, no temporary saves, only remarkable pause starts above 20000 object copying, its quite acceptable for me, and still shorter time, than copy a single HATCH.
I suppose the problem is in drawing file, because if we make purge/audit than save and reopen drawing - sometines is it possible to copy, but after all we need to do this each time we want to copy acad objects to another file. This annoying issue have our another team members too, it prevents to do our job.
I found, that with HATCH object some blocks is ALWAYS copying from one file to another.
AutoCAD 2013 :: Copy And Paste Scaling
Oct 31, 2013I still have a problem with copy and pasting drawings in the right units. I checked discussions but nothing seems to work. To make things less confusing for me I'll explain the situation in detail:
- I have a drawing file, in metres, that I want to copy to another file.
- My second drawing, in inches, is where I want to paste the drawing from the first file.
Let's say I have a line that's 1 m in the first drawing. When I paste onto the second drawing, it pastes as 1 in.
I tried insunits, units, etc. but it always comes out small when I paste it. Manually scaling the files will lose the accuracy.
AutoCAD 2013 :: Unable To Copy Viewports
Oct 9, 2013So in the last week or so, my C3D 2014 randomly decided not to copy viewports. It copies the box, but nothing in it. Plus you can't go into model space in the copied viewport. Just looks and acts like a normal rectangular polyline. But when you check the properties, it still says it is indeed a "Viewport" object.
Short of reinstalling the software, any setting that would cause this?
AutoCAD 2013 :: Copy Drawing To New Sheet
Dec 17, 2012I have been sent a drawing of a building site plan...how do i cut out the area i need and then copy that new area into a new sheet
View 3 Replies View RelatedAutoCad 2D :: 2013 - Cannot Copy In Feet - Only Inches
Aug 24, 2012When I had ACAD 2008 I used to copy objects and type 10' or 4' for the distance3 rather than 120 or 48. For some reason in ACAD 2013, it does not accept my distance in feet anymore. Do I suddenly have a setting off in ACAD 2013? I used to be able to work much more quickly and I work with large distances when copying.
View 3 Replies View RelatedAutoCAD 2013 :: Copy Object In X Direction Using Y Displacement
Nov 14, 2013If I am copying an object using snaps vertically down a wall a certain distance and come to a wall corner and then need to copy the object the same distance horizontally as I did vertically is there an easy way to enter this new direction? I keep thinking that I would just enter displacement and for X I should be able to use my mouse and snap/measure the old Y distance and then put Y,Z as 0. However, there is no option to get a relative distance in displacement. Is there something I am missing in the command?
View 8 Replies View RelatedAutoCAD 2013 :: Copy Paste From Another Drawing Does Not Work
Jan 13, 2013When I use copy or copy with base point and paste or paste to original coordinates in another drawing, nothing is being copied.
I use autocad 2013
The isuue is dwg related. It only happens when i paste to some of my dwg (usualy the most important ones...). All the drawing files that are affected are in 2013 format, but if i save them to older version the problem persist.
I ve tried
-purge r, purge a, audit, save
-wblock explode, purge a, audit, save
to no avail.
Tried many other solutions sa well, but nothing worked. What on earth could be wrong with DWG to prevent pasting from another drawing? Those drawings have been saved to lower formats before.
AutoCAD 2013 :: Copy With Text As A Base Point
Nov 11, 2013When I'm copying an object like a bubble note callout (number 1 with a circle around it) I want to be able to snap to the end of the text string so I can copy it uniformly and spaced evenly.
View 2 Replies View RelatedAutoCAD 2013 :: Unable To Copy / Paste In DWG Files
May 18, 2013In some of my DWG files I can’t able to copy paste the elements from one file to another . For example, I can’t able to copy the level marks from one file to another. Both files are located in same coordinate.
View 6 Replies View RelatedAutoCAD Inventor :: 2013 Crash When Use DA To Copy Files With New Name
Nov 12, 2012I have no this problem for version before Inventor 2013, just start from this lates version.
I models a ballet bar assy in 2'6" width with derived sketch, then I used DA to copy all the files with new name in 4'. After that, I tried to open the new files, it crashed itself, no matter I open a part or assemble.
But if I changed the derived sketch name back to its original, everything is fine for new files.
I attahced the zip file, try it. If it crashes, just change file: BALLET BAR 4ft_SKETCH
to: BALLET BAR 2ft-6in_SKETCH
everything is fine then.
AutoCAD 2013 :: Lost The Multiple Copy Command?
Nov 1, 2013how to add macros to my ACAD 2014 to count blocks, I managed to lose the "copym" command while trying to figure how to create a button in the user interface found in the ribbon bar under the customization tab...when I type copym into the command line, it wants to prompt me to finish the command string using the command "copymode" and doesn't even see that the command "copym" even exists in the list that is created. (the list that's created by an autocomplete function)
I found the command in the list while making a pull down menu item selection button for "copym" utilizing the user interface in the ribbon. I drug the command info for "copym" to the menu bar using the user interface feature. The command is there, all the info seems to be correct, I even managed to make a menu selection for it in the pull down menu. But when I select that menu item, the command line says: UNKNOWN COMMAND "COPYM" Press f1 for help.
I think I accidentally deleted something, just wondering how I can get my "copym" command function back into AutoCAD from never-never land.
AutoCAD 2013 :: Move / Copy Blocks With Attributes
Feb 10, 2013My entire office has been experiencing drawing crashes as a result of moving or copying certain blocks within a dwg. The problem seems to occur only while executing a Move or Copy command on a block with attributes, and zooming or panning while doing so. My heart sinks instantly because the block will disappear when placed, and I know I am doomed to crash.
I am usually able to pan or zoom a few times, and if I act quickly a Save will work before the drawing then crashes. We have recently switched from 2011 to Civil 3D 2013, and the problem still persists. The two culprits are our slope arrow block as well as hex call-out. Both blocks contain attributes and are frequently used through out our drawings, and this problem proves to be most frustrating when pressed for a deadline.
AutoCAD 2013 :: Copy And Paste As Block In Drawing?
Oct 11, 2013I have had this issue in 2013 and now after downloadign 2014 the same problem has come up. Drawing is fine other than every so often after you copy a group of items and try to paste it as a block it thinks for about 10-15 seconds then when you are prompted to enter a base point it doesnt show up. I can however select items, copy, and paste as long as it is not a block. I have tried to copy and paste a block that consists of just two polylines so I know it is not a size issue. To add more confusion if I shut down my computer and restart open the same file and try to copy and paste the same item as a block it will allow me to do it once and then it wont work again. I have attached a screenshot of the command history while trying to paste as block. I am not sure why it substitued all of these items? I dont need to shut down and restart everytime I need a new block inserted.
View 4 Replies View RelatedRevit :: Can't Copy Materials Library From Autocad 2013
Jan 21, 2013I've tried just about everything but I can't seem to be able to import a materials library from AutoCAD 2013 to Revit 2013
View 1 Replies View RelatedAutoCAD 2013 :: Copy/ Paste Multiple Drawings
Jun 16, 2013we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
Question : How the best to copy these texts?
AutoCAD LT :: 2013 Copy / Paste Not Working After Few Times
Jan 6, 2014A few of the computers are having problems with the Copy/Paste function. They had it working a few times and after that, it stopped working (can't paste after copying). Have tried restarting autocad and the computer but the issue is still there. Have also tried updating the service pack to the latest version. It works for a while and stopped working again.
View 5 Replies View RelatedAutoCAD 2013 :: Unable To Copy / Paste In Drawing
May 13, 2012I can't copy/paste in my drawing.
I open new drawing, then press Ctrl+Shift+C to copy an object with a base point and then when i press Ctrl+V nothing shows.
It says Command: _pasteclip, but there is no object attached to the cursor to paste.