I am copying a design in the vault & when i go through all the files to ensure they are all to 'copy' there is several which I cannot change their status from 'reuse' to 'copy'
I don't have any of the files checked out & they are all the latest versions.
I am using Inventor 2011 and vault. When I go to insert another instance of an IFeature i get a message that says "cannot insert iFeature that is currently open for edit (see attached) The .ide file and the part used to extract the iFeature are both closed and not checked out of the vault.
The only workaround I know of is is to close the file and open it up again.
When I load an image either a jpeg or psd file then make a layer copy I am unable to apply a preset action to this. Either a default action or one of my own on a Mac OSX running Lion. This did not present a problem in CS5 and I am wondering if I've missed something basic?
View 10 Replies View RelatedI used to be able to save my .idw files as an autocad .dwg, then be able to open and edit them in autocard. Now it seems that I can only save as inventor dwg and I am unable to edit the drawing in autocad.
View 9 Replies View RelatedI'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
I did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
I have a unique challenge. I use my personal laptop for my CAD work at work. We are now setup with Vault 2012 and Inventor 2012 and we are setup to pull our Templates, standard files and content center parts from the vault.
I have become so busy that I would like to do some of my work at home on evenings and weekends. Other than the obvious problems of having no life and working for nothing, I am having the problem of not being able to access templates or CC parts at home. I can store the CC and templates on my C drive but am not sure where to set Inventor to point to the files on my drive or if there is an easy to do so depending on where I am.
Is it possible to update an existing drawing to reference a new part or assembly file while maintaining associated views and possibly the annotation also?
I have tasks which require frequent subtle changes to assemblies. These assemblies will then be given a completely new file name, so it is no longer just a revision change but a new part altogether.
I recently update the template for my drawing files, change the title block, revision, note....and I can't find a clean way to import this template to the existing files. I tried the Drawing resource transfer wizard tool, but it doesn't seem to be doing anything that I want.
View 1 Replies View RelatedI have re-installed APDS Ultimate 2013 onto a new computer and am having some issues setting up my styles and etc...for the most part I have been working on it as I go with no issues...but I can't remember how I set up my export to dxf settings before. I think I just used the default settings, I exported to dxf from the idw environment by saving copy as and selecting dxf from drop down menu and selecting something like AutoCAD 2004. This has worked before and still does now, but the problem is the dxf's that are exported are huge. The drawing is of a single tiny part with basic geometry. The picture below shows the size difference between the files.
how I can make it a normal size, I don't really care about the size of the dxf except for the fact that I can't email it because we have a limit of 10MB.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I have an assembly with a few parts inside and want to create a new part(hose) in the assembly and link some faces from other parts within the assembly to my new part to show the routing of the hose.
Can I link faces within an assembly to one of the assembly components.
I wondered if there is a way of changing view reference from one object to another.
Example.
I have two similar models but drawing done for one.
I could save it as with a different name and replace in all the views referenciing from old model to new one.
Possible?
I am attempting to change the thread format in inventor under the dimensions style editor, but it is grayed out and does not let me select anything from the drop down box. I want to display the thread information so it includes the unit. For example, this is what it shows now: 1/2 - 14 NPT. I want to change it to 1/2" - 14 NPT. What I need to do to be able to change the thread format in the dimension style editor?
By the way, I have a lot of drawings to do, so manually typing in 1/2" - 14 NPT will take sometime, so I am looking for a quick and easy fix.
We just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
is it possible to change the colour of all elements in a pattern without changing the ipt file?
I have an assembly that has 4 rectangular patterns that can have any number of elements, sometimes the customer will ask for coating to be applied, in this case i only want to change the colour at the assembly level only.
Autocad 2010 C3D. I have been trying to copy a file and place it in another but when I hit the copy command the hourglass comes on then nothing. I go to the Task Manager window and it says AutoCad is not responding. I have tried to copy a small portion and it works ok. The original drawing came from a DGN but I haven't had problems with this in the past. They just haven't been this large.
View 8 Replies View RelatedDoes not give the option to copy one file to another file of DWG What to do?
View 6 Replies View Relatedlinked Excel file to Inventor 12 file parameters. Windows 7, Excel MS office professional '10. Linked excel file, here dimensions are driven by parameters which are driven by excel. toggled 'immediate update' Still - i have to open the sketch - it shows the updated number from Excel, but only on opening the sketch will it change the model to use the new dimension value.
View 3 Replies View RelatedI'm using Inventor 2014.
I created a Punch Tool iFeature, everything seemed fine, I could save it without problems.
However, when I try to place it in a part with the Punch Tool, it says "The file has 0 volume changing features. To be a valid punch tool, the .ide file must contain at least 1 sketch-based feature."
today i downloaded gimp 2.8.2 for windows 8, but when i tried to run the installer it downloads halfway and then displays an error message.
it says something in the style of: An error occurred when trying to copy a file. The source file is corrupted.
Is there any way GIMP can batch or copy metadata from one file to other file(s)? Specifically, a list of keywords from one image to other images that would use the same keywords.
View 1 Replies View RelatedI'm making progress with my buttons thanks to everyone who replied on here....my next step is to incorporate an image into the buttons (as a branding method within my e-store).
I have an existing image which i wish to use in gif format, and was wondering whether i can convert it into a *.psd file. my main problem is that the background of the image is white, and as i want to use it in my buttons i really need to make it transparent?
I've designed a logo with a green background (C: 57,5 - M: 15,15 - Y: 99,73 - K: 1,65) in Illustrator cs6. When I want to save my file as .PDF, and I open my PDF file, the green colour has changed (C: 59,22 - M: 12,94 - Y: 90,98 - K: 62,67). When I save my file as PDF I use the standard properties of Adobe (Acrobat 6, PDF 1.5).
View 6 Replies View RelatedI am using ACAD 2005 and am trying to copy&paste several objects from a layer I created in one .dxf file to one of the 2 standard layers (0 or Defpoints) in a new blank .dxf file.
My problem though is that if I copy and paste all of the objects (or even one of them) and them move to the new file and paste, it pastes the objects, but also "imports" into the new file the original file's layer that these objects were on.
For clarity, the new file only has the 2 standard layers and then after copy/pasting an object, the file manager shows the 3rd layer from the original file.
I'm new to Inventor. Lets say I create a part called Pipe.ipt. In it I specify the OD, Thk and Length of the pipe. If I then create an Assembly, and I want to use multiple instances of Pipe.ipt, but each instance has a different set of parameters (i.e. different OD, Thk and Length). How do I do this?
I see I can set up iPart, and I could set up tables with the OD and Thickness for various standard pipe sizes. But this doesn't address the length. How do I re-use the same Part in an assembly, but each part has it's own set of unique paramenters?
I am making a truss assembly by connecting a series of nodes with 100 adaptive rods. The node positions are somewhat random, so each rod will be a unique length.
It could be done with 100 adaptive rods. Something like one adaptive part that can be used 100 times in one assembly?
I have an adaptive part which I created within an assembly. I created work planes in this file, based on features in the assembly, and created a sketch on one of these work planes. I used this sketch for an extrusion. then I wanted to reuse the sketch again for another extrusion - normally one needs to select 'Share sketch' from the right-click menu of the sketch, but this is not available. I have already experienced this (random) behaviour, i.e. the 'Share sketch' option missing from the menu. In those case it was ok to make the sketch visible, and then I could use it again. But now it doesn't work. I made it visible, but when I click Extrusion, Inventor wants me to create a sketch, claiming there is no usable sketch.
Inventor 2013
In Inventor you can use "virtual components" in assemblies for things like paint, oil etc. In Vault, these virtual components will get an item number. Is it possible to re-use a virtual component in another assembly?
Like the same paint for 2 different models (maybe just differing in amount). Right now I would have to create a lot of items for the same thing.
I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
View 2 Replies View RelatedI was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?