AutoCAD 2013 :: 3DCONFIG Is Not Working

Jun 29, 2012

Everytime I try this command (3DCONFIG) it says " A newer version of the graphics card and driver database that is used for performance tuning is now available. Update now?"  I click yes and get "Performance Tuner failed to update. Please check your network connection and make sure you have write permission to the file"  

I made sure the file is not set to "Read-only" but it still doesn't work.

View 4 Replies


ADVERTISEMENT

AutoCAD 2010 :: Setting 3DCONFIG Manual Tune Options In Command Line?

Mar 22, 2012

I am looking for a way to set a couple options in the Manual Tune window from the Performance Tuning window (3DCONIG Prompt). More specifically I want to be able to:
 
Check what the setting for Enable hardware acceleration is (so it can be restored back)Set Enable hardware acceleration offReduce the number of tessellations to cacheReduce both the Surfaces, and Curves tessellation How would I do this from command line? My ultimate goal here is to run these commands in .NET.

View 1 Replies View Related

AutoCAD 2013 :: Drawing Order - Send To Back / Not Working Anymore In 2013

Apr 17, 2013

I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.

HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.

Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?

View 9 Replies View Related

AutoCAD 2013 :: DRAG And DROP Is Not Working On 2013

Apr 22, 2012

I used to drag and drop an image from my desktop in a drawign in 2012 version.

Now is not working and I get the following

View 5 Replies View Related

AutoCAD LT :: 2013 Has Stopped Working

Nov 28, 2012

Let me know the solution for Getting "AutoCAD LT has Stopped working"  while attempt to print in HP Laserjet M1536 dnf MFP Printer. I have tried the following steps but still i am getting the same Error.

1.Graphics Driver has been updated.

2.Printer Driver has been completely removed  and reinstalled.

3.New configuration for this printer has been added.

4. AutoCAD LT 2013 Service Pack 1.1 has been installed.

System configuration: Win 7 -64 bit,4 GB ram, Intel-i3 2120 processor, Intel(R) HD Graphics.

View 2 Replies View Related

AutoCAD 2013 :: Viewbase Is Not Working

Jan 26, 2013

 I recently installed AutoCAD 2013 and was excited to try viewbase to create 2D drawings from complex 3D geometry.  The problem is that despite selecting "from model space" the program launches the dialog box looking for an Inventor file, and there doesn't seem to be a way to simply work from the file's model space?  I even made a new file from scratch with a simple 3D shape and ran into the same problem.

View 2 Replies View Related

AutoCAD 2013 :: Netload Is Not Working?

Apr 27, 2012

I have custom menu items that call code in .DLL files that are loaded using Netload in the ACAD.LSP file.  However, since upgrading to 2013, the DLLs don't seem to load and the menu links say the macros don't exist.

View 9 Replies View Related

AutoCAD 2013 :: Commands Are Not Working

Apr 11, 2013

When I try typing "L" for line and hit enter (space bar), then click the mouse to draw a line nothing happens.  The command is active and the grips are active like the command is ready for me to click mouse to draw a line.  Also, hitting the space bar again does nothing.

View 9 Replies View Related

AutoCAD 2013 :: Offset Not Working In One Direction

Aug 19, 2013

I have a polyline that meets itself back at the beginning. It should be closed and appears to be. I joined several lines to get the polyline. When I try to offset it I can only offset towards the inside and not the outside. Is there a reason for this or am I doing something wrong?

View 9 Replies View Related

AutoCAD 2013 :: Control Keys Not Working?

Oct 16, 2013

When I try and save (Control+S), nothing happens.  I noticed none of my control keys do anything.

View 2 Replies View Related

AutoCAD 2013 :: SECTIONPLANE Command Not Working?

Aug 25, 2013

I am using AutoCad Mechanical 2013. I am trying to section in 3D but, when I press the Section Plane tool, it doesn't respond. See the picture below. At the bottom of drawing area its says "Command: _sectionplane Unknown command "SECTIONPLANE"."

View 2 Replies View Related

AutoCAD 2013 :: Reference Manager Not Working?

May 15, 2012

Reference Manager? I get (AutoCAD component has stopped working. A problem caused...)

This is as soon as I select the icon.

I can open up AutoCAD 2012 Reference Manager without any problems.

View 3 Replies View Related

AutoCAD 2013 :: Working Of Shift Overrides

Jul 16, 2013

I am have an issue with the shift overrides not working when there is an image under where i am working.

In the same drawing for example i can use shift to either select more than one point in a polyline, or to change between trim and extend or to fillet with a radius or to a point.

but when i try to do this with an image in the background it doesn't work. I need the image as i am tracing shapes.

View 5 Replies View Related

AutoCAD LT :: 2013 Plot Styles Not Working

Oct 3, 2012

The first picture shows an old drawing using Autocad LT 2005 plotstyles named "cannon.ctb"*notice the weight of the dimension lines

The second picture is my new drawing using those same plot styles in our new Autocad LT 2013. Almost nothing is visible and it will not copy it is so light.  The third picture is my new drawing and clicking on the box that says "Plot with Plot Styles" AND "Plot object lineweights". Note: I do not have my drawings set up with object lineweights. 

I have tried completely redoing my plot styles, but that does not work. I am at a complete loss as to how to get my plot styles to register in this Autocad version 2013. 

We have just upgraded our computers and now have windows 7, along with upgrading Autocad LT 2005 to Autocad LT 2013, and I have just installed a new Cannon plotter. However, I was having the same issue prior to the new plotter and I was hoping the plotter was the problem, which it seems to not be.

View 7 Replies View Related

AutoCAD 2013 :: Print Screen Key Not Working?

Nov 29, 2012

We are in the process of upgrading from AutoCAD 2010 to 2013. The print screen key on the keyboard will not work in the 2013 version (using Snagit to capture the screen image). Changing the hot key (in Snagit) works but I'm trying to keep the same workflow for my 300 plus Users.

View 2 Replies View Related

AutoCAD 2013 :: Mouse Wheel Pan Not Working?

Jul 16, 2013

my mouse wheel worked for panning while i am in the middle of a command, put now it stopped working and when i click the wheel i get my osnaps command. how can i get my mouse wheel to pan again?

View 6 Replies View Related

AutoCAD 2013 :: Selection First Then Right Click Not Working

Sep 5, 2013

The answer to this post is not the pickfirst variable. I select text, a line, anything really then right click, copy and nothing it loses the selection set and waits for me to now select something. I know it sounds like pickfirst, but pickfirst is set to 1.

2013 Autocad vanilla.All service packs and updates.

View 9 Replies View Related

AutoCAD 2013 :: Keyboard Shortcut Not Working?

Apr 25, 2013

I want to set up a keyboard shortcut for quickselect. I  opened the CUI right clicked to create new temporary shortcut, put the command into the line and selected shift and Q. There some gobbledy **** message about it being also assigned to another command but that it will prioritise the one at the bottom of the tree, and my new shortcut IS at the bottom of the tree so far as I understand the phrase.

Bur when I try to use it, the shift key is not recognised. I press shift and q but all that comes up in the command line is q.

(C3d 2013)

View 9 Replies View Related

AutoCAD 2013 :: Draw Order Not Working

Oct 15, 2012

I have been unable to make Draw Order work well.  The attached file  and other ones I created would not work.  The goal is to have the boarder and text (color 7) always stay on top after it is created as a block and pasted to any drawing.  After pasting it, the text go underneath the shade (color 155).  I have used Draw Order, picked the objects in the order I would like, repeated the same steps inside the Block Editor and Edit Block In-Place, still, the block would not work.  I never had this issue before - seem to have stared today.  Don't know what else to do.  The only thing that works is keep recreating the block till one works, which seldom works.

View 7 Replies View Related

AutoCAD 2013 :: Trusted Locations Are Not Working

Apr 2, 2013

i put my lisp files path in the trusted locations and my lisps wont load.

they only load if i have the location listed in the support file search path.

View 5 Replies View Related

AutoCAD 2013 :: IDrop Not Working With IE10?

Jun 24, 2013

Any fix for allow Idrop to work in IE 10?

View 2 Replies View Related

AutoCAD 2013 :: Application Has Stopped Working

Jan 19, 2013

All of a sudden I got this window when starting AutoCAD:"AutoCAD Application has Stopped working..A problem caused the program to stop working correctly.Windows will close the program and notify you if a solution is available."

I'm using v2013 on a desktop with Windows 8..I have been using the program since I got this new system in November without a hitch On sunday I had a nasty virus -Today I had to uninstalled AutoCAD and re-installed it and it worked good.After I closed it and went to open the application again I got the MESSAGE again

View 9 Replies View Related

AutoCAD 2013 :: Selection Commands Not Working

May 8, 2012

I am having problems with the selection commands,

Ctrl + A

Deselect all as they seem to be unknown commands? (Quick select in properties does work) I have loaded my own profile (but have used the default profile aswell to check, still no joy)

View 4 Replies View Related

AutoCAD 2013 :: IDrop And IE9 Not Working With Publish To Web?

Dec 12, 2013

why the iDrop functionality included in the Publish to Web feature still inside AutoCAD 2013 no longer works...

We use this to tool to host AutoCAD Detail Libraries so users can open details in Design Review or drag and drop details as blocks, exploding the blocks and editing the details to suit the need. However, this no longer works on our webpages!

FYI, We are using IE9 both 32 and 64 Bit.

View 2 Replies View Related

AutoCAD LT :: 2013 - Toolbar Macros Not Working

Apr 17, 2012

Toolbar macros I've been using for several versions now are not working in LT 2013?

Here an example of one of the macros:

^C^C_select;_auto;\_copy;_p;;@;@;_move;_p;;\_rotate;_p;;@;\_redraw:

View 4 Replies View Related

AutoCAD LT :: 2013 Properties Manager Not Working

Jan 8, 2013

I am having an issue with the Properties Manager in AutoCAD 2013 LT.

When a single object is selected, the dropdown appears blank and the properties displayed are just the default drawing properties that are displayed when nothing is selected.I am unable to view/modify any object's (line, hatch, etc) properties.

My PICKFIRST variable is set to 1. This happens on any file I open with 2013 LT but does not when the same file is opened with 2007 LT. I have also reinstalled/repaired the program through the control panel. I am at a complete loss.

View 8 Replies View Related

AutoCAD 2013 :: Wipeouts Not Working When Using External References?

Nov 1, 2013

I have a DWG file with wipeouts. When I use the files as external references in another DWG and print to PDF the wipeouts do not work and all that is seen is the wipeout line. Is there a way to have the PDF have the wipeouts appear as they should? 

View 3 Replies View Related

AutoCAD 2013 :: 2014 Crash Down Suddenly When Working?

May 17, 2013

The big problem is that when am doing whatever work, the program stop working and show a error message, that says: ERROR FATAL: Unhandled access violation writing 0x000 exception at 70601612h 

[URL]

And it happens when i'm on any kind of views or after printing..

My Pc is an: Intel Core i3-2100 CPU @ 3.10GHz

4gb Ram 

Windows 7 ultimate x64 bits

I DON'T HAVE AN VIDEO CARD. I use the one that provide the Motherboard.. Thats Intel HD Graphic 2000

View 1 Replies View Related

AutoCAD 2013 :: Autodesk Component Has Stopped Working

Aug 7, 2013

Every time i try and open Autocad 2013 when checking the licence it comes up with an error ( Autodesk component has stopped working).

View 1 Replies View Related

AutoCAD 2013 :: Xref Fade Control Is Not Working?

Mar 19, 2013

xref fade control not working?In model space I have xref'd a dwg (probably 2010 format) and it positions correct and displays in the normal default faded mode.  No matter where I have the slider in display options, the xref fade does not change.  Even changing the system variable through the command line is ineffective.

I'm running AutoCAD 2013 with Service Pack 1.1. installed.

View 4 Replies View Related

AutoCAD 2013 :: 2014 Is Not Working After Installing Windows 8.1?

Oct 30, 2013

FATAL ERROR: Unhandled Access Violation Reading 0x0020 Exception at b0ba4c12h

Ive looked around the forums and cant seem to find a solution. I was running AutoCad on Windows 8 just fine before...

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved